TF0112 Varactor Tunable Preselector Filter 108MHz – 118MHz – typical performance I. General & Electrical Requirements 1. 2. 3. 4. 5. 6. 7. 8. 9. Tuned Center Frequency Range: FMIN = 108MHz to FMAX = 118MHz Passband @ 1dB: ~ 3% Passband Insertion Loss: ≤ 5.0dB Input/Output VSWR (within the FSIG Bandwidth into 50): < 1.50:1 Absolute Stop Band Attenuation: FSIG ±10%: 15dB minimum FSIG ±20%: 25dB minimum In Band IP3 (VTUNE = +1V): +30dBm minimum In Band RF Power Handling: ≤ +20dBm (Peak, No Damage) ZIN/ZOUT: 50 nominal Tuning Method: Voltage Control (VTUNE): +1.0VDC to +10.0VDC II. Environmental & Physical Requirements 1. Temperature Range: Operating: -40°C to +85°C Storage: -45°C to +90°C 2. Solderability: Per EIAJ-STD-002 3. Package: Size: 1.25” (L) x 0.5” (W) x 0.350” (H) Type: SMD (See Figure 1) Reflow Profile: See Figure 2 Tape & Reel: 100-unit minimum Figure 2: Reflow Profile Figure 1: TF0112 Outline & PAD Layout Drawing III. Data Sheet Revision: Date 07/10/13 07/09/13 Rev. A - Author BRM BRM Details of Revision Updated the IP3 Specification point to clarify that this is the In Band IP3. Original Draft. Page 1 of 1 MtronPTI - 2525 Shader Road - Orlando - Florida - 32804 - USA - 1-407-298-2000 - www.mtronpti.com MtronPTI may change specifications without notice to improve end application performance or product manufacturability. No liability is assumed as a result of product use or application. Please contact MtronPTI for latest information.