PRODUCT DATASHEET MA260 CAT IV True RMS 200A AC Open Jaw Clamp Meter Easy-to-use, one button, Auto Sense technology allows meter to recognize the input being measured and will automatically switch to the correct mode of operation. Its convenient Open Jaw design provides quick measurements in tight locations. True RMS provides accurate readings. Features • Smart Auto Sensing technology enables the meter to • 10,000 count backlit LCD display recognize the input and automatically switch to the • Smart Data Hold freezes the reading on the display and automatically changes if a new reading is larger correct mode of operation • than 50 counts For AC Voltage, Auto Sense feature evaluates input signal and adjusts Input Impedance to eliminate effects • Auto Power Off with disable of ghost voltages • Battery capacity (%) displayed on power-up • 0.6" (16mm) open jaw size • Slim housing construction with built-in test lead holders • True RMS for accurate readings of noisy, distorted • Complete with test leads and two AAA batteries or non-sinusoidal waveforms • Built-in non-contact voltage detector with LED indicator Specifications Range Max Resolution Basic Accuracy AC Current 200A 0.1A ±3.0% AC Voltage 1.3V to 1000V 0.1V ±0.9% DC Voltage 2.1V to 1000V 0.1V ±0.3% Non-contact Voltage (NCV) 80 to 1000V AC (50 to 60Hz) Resistance (Ω) 0 to 10kΩ 1Ω ±0.9% Input Impedance 6kΩ up to 30V; Increases to 420kΩ at 1000V Diode 0.4 to 0.8V 0.1V ±1.0% Continuity Beeper (25Ω threshold) Dimensions 7.6 x 2.1 x 1.2" (193 x 54 x 31mm) Weight 9.9oz (280g) Ordering MA260 ............... CAT IV True RMS 200A AC Open Jaw Clamp Meter UPC Code: 793950382622 Specifications subject to change without notice. Copyright © 2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. Rev. 7/29/15 www.extech.com