D TYPE CONNECTOR HOODS PLASTIC HOODS One Piece Design Black, Grey, Green, Red, Blue or Yellow Available 9, 15, 25 or 37 way UL Approved B OUTLINE DRAWING A 15.5 Dimension - mm 53.5 A B ORDERING INFORMATION DBC D PH 09 BLK Dubilier Connectors D style Hood Style Nº of Ways Colour PH = Plastic Hood 09 = 9ways 15 = 15ways 25 = 25ways 37 = 37ways BLK = Black GRY = Grey GRN = Green RED = Red BLU = Blue YEL = Yellow 273 www.dubilier.co.uk A B Max Cable O.D. 35.0 41.0 54.5 71.0 17 16 15 17 8.4 12 12 14 SECTION 11 9 WAY 15 WAY 25 WAY 37 WAY D TYPE CONNECTOR HOODS PLASTIC SCREW TOGETHER HOOD 9, 15, 25 & 37 way Accommodates 3 - 13mm cable sizes UL94-VO material Black, Red, Blue, Green and Yellow available 45˚C Cable entry available OUTLINE DRAWING TOP ENTRY 11.8Ø SECTION 11 15 Grommet Number 1 2 3 4 Dimensions Diameter 4.0 5.0 7.0 10.0 Ways 9 15 25 37 DIM A 31.2 39.5 53.4 69.7 DIM B 39.9 41.5 48.6 53.6 45˚ ENTRY Grommet Number 1 2 3 4 Dimensions Diameter 4.0 5.0 7.0 10.0 Ways 9 15 25 37 DIM A 31.0 39.5 53.2 69.7 DIM B 36.3 40.3 40.3 40.3 ORDERING INFORMATION DBC D PSH 09 BLK Dubilier Connectors D Style Hood Style Nº of Ways Colour PSH = Plastic Screw together PSH45 = Plastic Screw together 45˚ 09 = 09ways 15 = 15ways 25 = 25ways 37 = 37ways BLK = Black RED = Red BLU = Blue GRN = Green YEL = Yellow 274 www.dubilier.co.uk DIECAST HOODS D TYPE CONNECTOR HOODS RFI/EMI Screened Hoods Nickel or Black Available 9, 15, 25 or 37 way Lightweight Zinc Diecast Shell 45° Cable Entry Available VDE Approved Accommodates 3.5mm to 13mm Cable OUTLINE DRAWING Dimension - mm B A 15.5 ORDERING INFORMATION 53.5 DBC D DH 09 Dubilier Connectors D style Hood Style Nº of Ways Colour DH = Diecast Hood DH45 = Diecast Hood 45° 09 = 9ways 15 = 15ways 25 = 25ways 37 = 37ways NKL = Nickel BLK = Black A NKL B 275 www.dubilier.co.uk A B 31.2 39.5 53.4 69.7 39.9 41.5 48.6 53.6 SECTION 11 9 WAY 15 WAY 25 WAY 37 WAY D TYPE CONNECTOR HOOD METALISED PLASTIC HOODS Top or 45° Cable Entry Lightweight Construction Nickel Plated over Copper on ABS 9, 15, 25, 37 or 50* way *Top Entry Only OUTLINE DRAWING Top Entry Top Entry C C SECTION 11 BB Shell A B C D 9 WAY 15 WAY 25 WAY 37 WAY 50 WAY 31.1 39.1 53.1 69.3 67.2 35.5 38.8 42.0 46.5 47.1 16.3 16.3 18.0 23.0 23.9 16.3 16.3 16.3 16.3 19.1 Shell A B C D 9 WAY 15 WAY 25 WAY 37 WAY 31.1 39.1 53.1 69.3 37.2 40.6 44.1 45.7 16.3 16.3 18.0 22.4 16.3 16.3 16.3 16.3 Dimension - mm AA D D 45ϒ Entry 45ϒ Entry C C B B A Dimension - mm D A D ORDERING INFORMATION DBC D MPH 09 Dubilier Connectors D style Hood Style MPH = Metalised Plastic Hood MPH45 = Metalised Plastic Hood 45° Nº of Ways Options 09 = 9ways 15 = 15ways 25 = 25ways 37 = 37ways *50 = 50ways Blank = Short Screw 276 www.dubilier.co.uk D TYPE CONNECTOR HOODS LOW COST METALISED PLASTIC HOOD 9, 15, 25 & 37 way Accommodates 3 - 13mm cable sizes Nickel over copper plating Attention better than 40dB between 30mHz to 1 GHz 45˚ Cable entry available OUTLINE DRAWING 45˚ ENTRY TOP ENTRY SECTION 11 Sub D 9 15 25 37 A 31.2 39.5 53.4 69.7 B 39.9 41.5 48.6 53.6 Sub D 9 15 25 37 C 15.0 15.0 15.0 15.0 ORDERING INFORMATION DBC D MPHLC 09 Dubilier Connectors D Style Hood Style Nº of Ways MPHLC =Metalised Plastic Hood Low Cost MPHLC45 =Metalised Plastic Hood Low Cost 45˚ 09 = 09ways 15 = 15ways 25 = 25ways 37 = 37ways 277 www.dubilier.co.uk A 36.3 40.3 40.3 40.3 B 31 39.5 53.2 69.7 C 15.0 15.0 15.0 15.0 D TYPE CONNECTOR HOODS ETHERNET AND THINNERNET HOODS 18 For use with Transceiver Cables Zinc Diecast Shell for top and side Cable Entry 47.7 Easy Assembly ø11.71 Three options available IEEE Approved 16.3 39.4 18 Assembly Instructions 1. 2. 3. 4. 5. Select the tightest fitting insert that will fit over the cable. Fold braid/foil back over insert as shown in diagram. Ensure any excess is trimmed or folded back under lip of insertion Install jackscrews (if required). 47.7 and close cover. Install connector Install Slidelock clip/Slidelock studs (if required) See Page 43. OUTLINE DRAWING SECTION 11 18 16.3 39.2 38.2 47.7 16.3 39.2 16.3 39.2 Thin Ethernet DBCDEH1 18 Thick and Thin Ethernet DBCDEH2 ø11.71 47.7 18 16.3 39.4 Thick and Thin Ethernet - 90° DBCDEH3 DBC D EH1 Dubilier Connectors D Style EH1 - Thin Ethernet EH2 - Thick and Thin Ethernet EH3 - Thick and Thin Ethernet 90° 38.2 ø11.71 47.7 ORDERING INFORMATION 39.4 278 www.dubilier.co.uk 16.3