oes8

PLETRONICS OeS8 Series
OeXO® Oscillator
Applications
Features
®
• Pletronics’ OeXO Series Ovenized equivalent
OeS8
14.1 x 20.6 x 9.8 mm
SMD / DIL Metal Package
•
•
•
•
•
Temperature Compensated Crystal Oscillator
Optional Voltage Control Function
Low Power / Fast Warm Up
CMOS Output
SONET / SDH / DWDM
Test & Measurement
Telecom Transmission & Switching Equipment
Base Stations / Picocell
Wireless Communication Equipment
3.3V nominal Supply Voltage
See tables for available Frequencies
Electrical Characteristics
Parameter
Min
Typ
Max
Unit
Condition (Consult factory for other options)
Frequency Range 2
9.60
-
26.0
MHz
See table below for developed frequencies
Frequency Stability vs. Temperature 2
-50
-
+50
ppb
Over -40°C to +85°C
-
±1.0
ppm
Vcontrol 1.50 volts at 25°C ± 2°C when VCC > 2.8 volts
If Vcontrol used
-40
-
+85
°C
-
3.3
-
Volts
Frequency Initial Calibration
Operating Temperature Range 2
Supply Voltage
1, 2
VCC
at fixed VCC + load
(reference to midpoint min/max frequency)
See factory for other options
± 5%
-
20
30
mA
10 MHz
20 MHz
Frequency Stability vs. Supply
-
-
±0.05
ppm
Load: 15 pF, VCC ± 5%
Frequency Stability vs. Load
-
-
±0.05
ppm
Load: 15 pF ± 10%
0.5
-
2.5
Volts
1.50 volts nominal for VCC
0
±6.0
±8.0
ppm
Positive Slope
-
-
2.0
%
Supply Current 2
ICC
Vcontrol Range
Frequency Pullability
2
Linearity
Output Waveform
Load: 15 pF, VCC ± 5%
CMOS
Duty Cycle
40
50
60
%
Output VHIGH
90
-
-
%Vdd
Output VLOW
-
-
10
%Vdd
Output TRISE and TFALL
-
-
6.5
nS
Startup Time
-
25.0
-
mS
Within ± 200 ppb of final frequency
Long Term Stability (Aging)
-
-
±2.0
ppm
10 years at 25°C ± 2°C
-
-120
-134
-144
-145
-
dBc/Hz
25°C ± 2°C at 20.0 MHz
-55
-
+90
°C
Phase Noise
100 Hz
1 kHz
10 kHz
100 kHz
Storage Temperature Range
Note:
1
2
Load: 15 pF
Vth: TR and TF 10% and 90% of amplitude
Vth: D.C. 50% of amplitude
Place a 10nF power supply bypass capacitor next to device for correct operation
Typical capabilities shown. A unique OeXO® datasheet is created for each specific device. See Factory for other options.
The following is a list of developed frequencies. Consult factory for other options.
9.60M, 10.00M, 13.00M, 16.384M, 19.20M, 20.00M, 26.00M only
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Dec 8, 2015 Rev. A
Copyright © 2016, Pletronics Inc. C 19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
Pg 1
PLETRONICS OeS8 Series
OeXO® Oscillator
Part Number (Possible Options shown)
Series
Model
Operating Temperature
VCC Supply Voltage 1
OES8
Lowest
Highest
Stability 1, 2
Pullability 1
Frequency
(ppm)
(ppm)
(MHz)
A unique number will be assigned for your exact specification
-19.20M
9.6 - 26 MHz
Developed:
9.60M,
10.00M,
13.00M,
19.20M,
20.00M,
26.00M
0
+85oC
-40oC
3.3 volts nominal
± 0.05
±5
±8
1
2
Contact Factory for non-standard specifications
Not all stabilities are available with all operating temperature ranges. Contact Factory for exact combinations available.
Device Marking
PLE = Pletronics
FFFF = Frequency in MHz
YMD = Date code
zzz = Internal factory codes
PLE
OES8*
FFFFM
C YMDzzz
* A unique number is assigned for your exact specifications.
Specifications such as part number, frequency stability, supply voltage and operating temperature range, etc. are not identified from marking.
External packaging labels and packing list will correctly identify the ordered Pletronics part number.
Codes for Date Code YMD (Year Month Day)
Code
4
5
6
7
8
Code
A
B
C
D
E
F
G
H
J
K
L
M
Year
2014
2015
2016
2017
2018
Month
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
Code 1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Day
Package Labeling
Tube or pad packaging is available.
P/N Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
RoHs Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Pletronics Inc. certifies this device is in accordance with the RoHS 2 (2011/65/EU) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 4.0 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020D
Second Level Interconnect code: e4
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Dec 8, 2015 Rev. A
Copyright © 2016, Pletronics Inc. C 19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
Pg 2
PLETRONICS OeS8 Series
OeXO® Oscillator
Mechanical Dimensions
A
Inches
mm
0.811 ± 0.004 20.60 ± 0.1
B
0.555 ± 0.004 14.10 ± 0.1
0.386 max
9.80 max
1
D
0.147
3.73
E1
0.006
0.15
1
0.079
2.00
1
0.200
5.08
1
0.098
2.5
1
0.053
1.35
1
0.301
7.65
1
0.053
1.35
C
F
G
H
J
K
L
1
Typical dimensions
(Not to Scale)
Cover: Kovar, Electroless Nickel Plated 1µinch (25µm) typical, Resistance welded to base, Laser Marked
Base: Kovar, Glass to metal sealed leads
PCB: FR4
Layout
Pin
Function
Note (Solder pad layout may use any combination of pins 1, 7, 8 & 14 shown)
1
Vcontrol Input
If this function is not specified, recommend connecting this pin to ground. EFC (Electronic Frequency Control).
7
Ground (GND)
8
Output
CMOS
VCC Supply Voltage
Connect an appropriate 10nF power supply bypass capacitor as close as possible
14
For Optimum Jitter Performance, Pletronics recommends:
$
$
$
$
$
A ground plane under the device
Do not route large transient signals (both current and voltage) under the device
Do not place near a large magnetic field such as a high frequency switching power supply
Do not place near piezoelectric buzzers or mechanical fans
Minimize air flow across the device
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Dec 8, 2015 Rev. A
Copyright © 2016, Pletronics Inc. C 19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
Pg 3
PLETRONICS OeS8 Series
OeXO® Oscillator
Electrical Test /Load Circuit
Environmental / ESD Ratings
Reliability: Environmental Compliance
Parameter
Condition
ESD Rating
Model
Min. Voltage
Condition
Mechanical Shock
JESD22-B104
Human Body Model
2000V
JESD22-A114
Vibration
JESD22-B103
Charged Device Model
500V
JESD 22-C101
Solderability
IPC J-STD-002
Machine Model
200V
JESD22-A115
Thermal Shock
MIL-STD-883 Method 1011, Condition A
Absolute Maximum Ratings
Parameter
Thermal Characteristics:
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 120oC/Watt depending on the solder
pads, ground plane and construction of the PCB.
Unit
VCC Supply Voltage
-0.6V to +6.0V
Vi
Input Voltage
-0.6V to VCC + 0.6V
Io
Output Current
-10mA to +10mA
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Dec 8, 2015 Rev. A
Copyright © 2016, Pletronics Inc. C 19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
Pg 4
PLETRONICS OeS8 Series
OeXO® Oscillator
Charts
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Dec 8, 2015 Rev. A
Copyright © 2016, Pletronics Inc. C 19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
Pg 5
PLETRONICS OeS8 Series
OeXO® Oscillator
Important Notice
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other
changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice.
Customers are responsible for obtaining the latest relevant information before placing orders and should verify that
such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale
supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with
PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary
to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of
each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are responsible for
their products and applications using PLE components. To minimize the risks associated with the customer
products and applications, customers should provide adequate design and operating safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death, personal
injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to
be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an
appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent
right, copyright, artwork or other intellectual property right relating to any combination, machine or process which
PLE product or services are used. Information published by PLE regarding third-party products or services does
not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of
such information may require a license from a third party under the patents or other intellectual property of the third
party, or a license from PLE under the patents or other intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without
alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this
information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such
altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that
product or service voids all express and implied warranties for the associated PLE product or service and is an
unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics, Inc.
19013 36th Ave. West
Lynnwood, WA 98036-5761
U.S.A.
URL: www.pletronics.com
Tel: 425.776.1880
Fax: 425.776.2760
email: [email protected]
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Dec 8, 2015 Rev. A
Copyright © 2016, Pletronics Inc. C 19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
Pg 6