SM7T Series Miniature SMD Crystal December 2015 • Pletronics’ SM7T Series is a m iniature low profile surface m ount crystal. • Package is ideal for autom ated surface m ount assem bly and reflow practices. • Tape and Reel packaging • • • • 26 MHz to 60 MHz 1.25 x 1.6 x 0.32 m m 4 pad AT Cut Fundam ental Crystal Ideal for use in hand held consum er products Bluetooth, W LAN Pletronics Inc. certifies this device is in accordance with the RoHS 6/9 (2011/65/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadm ium , Hexavalent Chrom ium , Lead, Mercury, PBB’s, PBDE’s W eight of the Device: 0.005 gram s Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Electrical Specification: Item Min Max Unit 26 60 MHz - ±20 ppm at +25oC + _ 3oC, see part number for options ±5 ±15 ppm see part number for available options - 200 Ohms to 26 MHz 100 Ohms to 28 MHz - 80 Ohms to 37 MHz - 60 Ohms to 47 MHz - 50 Ohms > 48 MHz - 100 µW use 10 µW for testing - 4 pF Pad to Pad capacitance -5 +5 ppm /Yr for the first year at +25oC _ + 3o C -2 +2 ppm /Yr after the first year at +25oC _ + 3oC Operating Temperature Range -30 +85 o C Storage Temperature Range -55 +125 o C Frequency Range Calibration Frequency Tolerance Frequency Stability Equivalent Series Resistance (ESR) Drive Level Shunt Capacitance o (C0) o Aging at 25 C _ +3C Condition see part number for available specified tolerance range options AT Cut Crystal Frequency versus Temperature Typical Performance: P roduct inform ation is current as of publication date. T he product conform s to specifications per the term s of the P letronics standard warranty. Production processsing does not necessarily include testing of all param eters. Copyright © 2009, Pletronics Inc. SM7T Series Miniature SMD Crystal December 2015 Part Number: SM7T -8 -25.0M -20 H 1 G G -XX See chart below for available options Internal code or blank Highest Specified Operating Temperature A = 40oC G = 70oC N = 100oC o o B = 45 C H = 75 C P = 105oC o o C = 50 C J = 80 C R = 110oC o o D = 55 C K = 85 C S = 115oC E = 60oC L = 90oC T = 120oC o o F = 65 C M = 95 C U = 125oC Lowest Specified Operating Temperature A = +10oC F = -15oC L = -40oC o o B = +5 C G = -20 C M = -45oC C = 0oC H = -25oC N = -50oC o o D = -5 C J = -30 C P = -55oC o o E = -10 C K = -35 C Fundamental mode AT cut crystal Frequency Stability See chart below Calibration Frequency Tolerance (Typ. Values shown) 20 = _ + 20 ppm at 25oC _ + 3oC (Standard) 50 = _ + 50 ppm at 25oC _ + 3oC Frequency in MHz Cload in pF Parallel Resonance from 06 to 32 pF, 8 pF is standard -orSR = Series Resonance Model Number Current production ranges are shown below. A vailable Frequency Stability versus Tem perature in ppm O perating T em perature Range A B C CODE D E F G H J K _ 3.0 + _ 5.0 + _ 8.0 + _ 10 + _ 15 + _ 20 + _ 30 + _ 50 + _ 100 + _ 150 + 0 to +45 oC 0 to +50 oC CB ! ! ! ! ! ! ! ! ! CC ! ! ! ! ! ! ! ! ! 0 to +60 oC CE ! ! ! ! ! ! ! ! ! 0 to +70 oC CG ! ! ! ! ! ! S TD ! ! -10 to +50 oC EC ! ! ! ! ! ! ! ! ! -10 to +60 oC EE ! ! ! ! ! ! ! ! ! -10 to +75 oC EH ! ! ! ! ! ! ! ! -20 to +70 oC GG ! ! ! ! ! ! ! ! -20 to +75 oC GH ! ! ! ! ! ! ! ! -30 to +75 oC JH ! ! ! ! ! ! ! -30 to +80 oC JJ ! ! ! ! ! ! ! -30 to +85 oC JK ! ! ! ! ! ! ! -35 to +80 oC KJ -40 to +85 oC LK www.pletronics.com 425-776-1880 2 SM7T Series Miniature SMD Crystal December 2015 Marking and Packing Information The part will be m arked • • • • • PFFM YM Dx Or FFYM x Marking consists of the frequency “FF” which will be truncated to the first two digits due to package size. Date code consists of Year, Month or Year, Month and Day (see codes below) The x is an internal PLE production code Orientation of m arking m ay be m ixed on the tape Traceability of part is lost once rem oved from reel Codes for Date Code YM D Code 2 3 4 2012 2013 2014 Year Code A JAN Month Code 1 B FEB 5 2015 C MAR 2 3 D APR 4 6 2016 E MAY 7 2017 F JUN 5 6 8 2018 G JUL H AUG J SEP 7 8 9 K OCT L NOV M DEC A B C Day 1 2 3 4 5 6 7 8 9 10 11 12 Code D E F G H J K L M N P R 20 21 22 23 24 Day 13 14 15 16 17 18 19 Code T U V W X Y Z Day 25 26 27 28 29 30 31 Package Labeling Label is 1" x 2.6" (25.4m m x 66.7m m ) Font is Courier New Bar code is 39-Full ASCII (Label will show SM7T) Label is 1" x 2.6" (25.4m m x 66.7m m ) Font is Arial Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A www.pletronics.com 425-776-1880 3 SM7T Series Miniature SMD Crystal December 2015 Mechanical: Inches A 0.049 _ + 0.002 1.25 _ + 0.05 B 0.063 _ + 0.002 1.6 + _ 0.05 C 0.014 max 0.35 max D1 0.018 0.45 1 0.002 0.05 F1 0.010 0.25 G1 0.022 0.55 H1 0.016 0.4 J1 0.002 0.05 K1 0.005 0.12 E Contacts : Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm mm Not to Scale 1 Typical dimensions Pad 1 or Pad 2 shall have the pad chamfered. Connection (top view): Pad 2 is connected to the m etal cover Pad 4 has no connection Layout and application information • • • • Trace lengths to the crystal should be kept as short as possible. The crystal connections are sensitive to noise. The package should be grounded for optim um perform ance, pad 2 connected to ground. These very sm all crystals have high ESR, the oscillator start-up and operation should take this into consideration. • These sm all crystals should have their m axim um drive level lim ited to 100uW . www.pletronics.com 425-776-1880 4 SM7T Series Miniature SMD Crystal December 2015 Reflow Cycle (typical for lead free processing) The part m ay be reflowed 2 tim es without degradation. Tape and Reel: available for quantities of 250 to 3000 per reel (<1000 will be cut tape) Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 1.0 S1 Min T Max 0.6 0.25 T1 Max 2.0 +0.05 _ 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 _ +0.1 _0.1 + 24mm P2 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 8 mm 3.5 6.4 1.7 _ +0.1 4.0 _ +0.1 1.0 8.9 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 C mm D mm Tape Width 13.0 +0.5 / -0.2 8.4 +2.0 -0.0 8.4 +2.0 -0.0 8.4 +2.0 -0.0 8.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 5 SM7T Series Miniature SMD Crystal December 2015 IM PORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to m ake corrections, im provem ents, m odifications and other changes to this product at anytim e. PLE reserves the right to discontinue any product or service without notice. Custom ers are responsible for obtaining the latest relevant inform ation before placing orders and should verify that such inform ation is current and com plete. All products are sold subject to PLE’s term s and conditions of sale supplied at the tim e of order acknowledgm ent. PLE warrants perform ance of this product to the specifications applicable at the tim e of sale in accordance with PLE’s lim ited warranty. Testing and other quality control techniques are used to the extent PLE deem s necessary to support this warranty. Except where m andated by specific contractual docum ents, testing of all param eters of each product is not necessarily perform ed. PLE assum es no liability for application assistance or custom er product design. Custom ers are responsible for their products and applications using PLE com ponents. To m inim ize the risks associated with the custom er products and applications, custom ers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or system s or other critical applications that m ay involve potential risks of death, personal injury or severe property or environm ental dam age. Inclusion of PLE products in such applications is understood to be fully at the risk of the custom er. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or im plied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any com bination, m achine or process which PLE product or services are used. Inform ation published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsem ent thereof. Use of such inform ation m ay require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of inform ation in PLE data sheets or web site is perm issible only if the reproduction is without alteration and is accom panied by associated warranties, conditions, lim itations and notices. Reproduction of this inform ation with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered docum ents. Resale of PLE products or services with statem ents different from or beyond the param eters stated by PLE for that product or service voids all express and im plied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statem ents. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 th 19013 36 Ave. W est Fax: 425-776-2760 Lynnwood, W A 98036-5761 USA E-m ail: ple-sales@ pletronics.com URL: www.pletronics.com Copyright © 2009, Pletronics Inc. www.pletronics.com 425-776-1880 6