Double Balanced Mixer Model MM134P-1 Ultra-Broadband RF 1.5 to 26.5 GHz (1) Electrical Specifications : Specifications Conditions Parameter SSB Conversion loss: (2) (3) RF (GHz) 1.5-26.5 1.5-26.5 1.5-26.5 LO (GHz) 1.5-26.5 1.5-26.5 1.5-26.5 IF (MHz) DC-500 DC-700 DC-900 Third LO Harmonic (2) (3) Conversion Loss: 1.5-26.5 1.5-26.5 1.5-26.5 1.5-26.5 1.5-26.5 1.5-26.5 DC-500 DC-700 DC-900 Isolation LO to RF: LO to IF: RF to IF: 1.5-26.5 2.5-26.5 Min 20 dB 1.5-26.5 Typical 7.0 dB 8.0 dB 9.0 dB Max 9.5 dB 10.5 dB 11.5 dB 17.5 dB 18.5 dB 19.5 dB 22 dB 23 dB 24 dB 29 dB 34 dB 34 dB Input 1-dB Compression Point: 1.5-26.5 1.5-26.5 DC-900 +3 dBm Input Third Order Intercept Point: 1.5-26.5 1.5-26.5 DC-900 +12 dBm LO Power: 1.5-26.5 1.5-26.5 DC-900 +10 dBm (4) Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25°C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100°C and improves less than 0.5 dB at -55°C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM134P-1 Typical Performance at 25°C Outline: P1 Third Harmonic Conversion Loss 900 RF to IF Isolation - dB LO VSWR IF VSWR All dimensions are in inches and [mm]. 900 Spectrum Microwave· 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 REV A 5/21/09