Data Sheet SLB-25 Series Features ・Viewing angle 2θ 1/2 : 160° Color Type V D Y M Specifications Viewing angle 2θ 1/2 / 160 : Standard Part No. Chip Structure Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Emitting Forward Voltage VF Reverse Current IR Dominant Wavelength Luminous Intensity IV Power Forward Peak Forward Reverse Operating Storage Color Dissipation Current Current Voltage Temperature Temperature Typ. Max. Min. Typ. λD PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) (V) IF(mA) (μA) VR(V) Typ.(nm) IF(mA) (mcd) (mcd) IF(mA) ■ SLB-25VR 630 Red 2.0 GaAsP on GaP ■ SLB-25DU Orange 60 605 20 3 60＊ ■ SLB-25YY -25 to +85 -30 to +100 10 10 3 10 Yellow ■ SLB-25MG Yellowish Green GaP 0.36 1.0 10 587 2.1 75 25 572 ＊:Duty1/5, 200Hz Dimensions Recommended Solder Pattern Viewing Angle SCANNING ANGLE (deg) X -Y 20° 10° 0° 10° 30° X’ -Y’ 20° 1.0 ±0.1 2.0 40° 50° 60° 60° X -Y X’ -Y’ 30° 40° 50° 70° 70° 80° 80° 90° 100 50 90° 100 50 RELATIVE INTENSITY (%) 2.5 or 5.0 0LQ □ 0 （） &DWKRGH Tolerance : ±0.2 （unit : mm） （unit : mm） Electrical Characteristics Curves 1.0 0.1 1.0 1.5 2.0 2.5 ■ ■ ■ ■ ■SLB-25VR ■SLB-25DU ■SLB-25YY ■SLB-25MG 3.0 ■ ■ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 1 0.1 0.1 1 10 100 Derating FORWARD CURRENT : IF (mA) $70263+(5(7(03(5$785(：7D& FORWARD VOLTAGE：VF (V) Ta=25°C 10 RELATIVE LUMINOUS INTENSITY (a.u.) 10 Luminous Intensity-Forward Current ,) P$ 5(/$7,9(/80,1286,17(16,7<DX 50 FORWARD CURRENT：IF (mA) Luminous Intensity-Atmosphere Temperature Ta=25°C MAXIMUM FORWARD CURRENT：IF Max. (mA) Forward Current-Forward Voltage ■ ■ ■ ■ ■SLB-25VR ■SLB-25DU ■SLB-25YY ■SLB-25MG 1/2 ■SLB-25VR ■SLB-25DU ■SLB-25YY ■SLB-25MG 30 20 10 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE：Ta (°C) ■ ■ ■SLB-25VR ■SLB-25DU ■SLB-25YY ■SLB-25MG 2011.12 - Rev.C 100 SLB-25 Series Rank Reference of Brightness Red (V) （Ta=25˚C, IF＝10mA） E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to angle (mcd) (2ɵ1/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 ※ 2×5 Square type 160˚ Diffused Colored SLB-25VR Orange (D) （Ta=25˚C, IF＝10mA） E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to angle (mcd) (2ɵ1/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 ※ 2×5 Square type 160˚ Diffused Colored SLB-25DU Yellow (Y) （Ta=25˚C, IF＝10mA） E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to angle (mcd) (2ɵ1/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 ※ 2×5 Square type 160˚ Diffused Colored SLB-25YY Green (M) （Ta=25˚C, IF＝10mA） E F G H J K L M N P Q R S T U V Viewing Brightness Rank Brightness 0.40 to 0.63 to 1.0 to 1.6 to 2.5 to 4.0 to 6.3 to 10 to 16 to 25 to 40 to 63 to 100 to 160 to 250 to 400 to angle (mcd) (2ɵ1/2) Resin Color 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 100 160 250 400 630 ※ 2×5 Square type 160˚ Diffused Colored SLB-25MG ※Brightness on specification sheet include tolerance of within ± 10%. Part No. Construction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www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 2/2 2011.12 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A