English Datasheet

PRODUCT DATASHEET
RPM33 Combination Contact/
Laser Photo Tachometer
Quickly measure RPM, surface speed and
length with one tool. Use the contact wheel
for up-close readings or laser mode for
safer, non-contact measurements up to
1.6ft (0.5m) away.
Applications:
Contact
RPM measurement
Laser Photo
RPM measurement
• Contact RPM
- flywheels
- conveyors
- pumps
- elevators
• Non-Contact RPM
- motors
- fans
- gears
Features
•
Large 5 digit backlit LCD display
•
Microprocessor based with quartz crystal oscillator to
•
Laser guided for greater distance non-contact
measurements up to 1.6ft (500mm)
•
maintain high accuracy
•
•
Complete with contact wheel for rpm or linear
Store/recall 10 data sets in memory with 4 parameters
surface speed/length, 9V battery, reflective tape
(measurement, max, min and average)
and soft case
Provides wide RPM (photo and contact) and Linear
Surface Speed/Length (contact) measurements
Specifications
Photo mode
Contact mode
Range (rpm)
2 to 99,999rpm
2 to 20,000rpm
Surface Speed
—
0 to 78,720 inches/min
—
0 to 6560 ft/min
—
0 to 2186 yards/min
Length
—
0 to 2000 m/min
—
3.9 to 39370 inches
—
0.3 to 3280 feet
—
0.1 to 1093 yards
—
0.1 to 1000 meters
Frequency (Hz)
—
333 Hz
Accuracy
0.05% rdg +1 digit
0.05% rdg +1 digit
Sampling Time
0.5 Sec > 120rpm
Resolution
0.1rpm (< 10,000 rpm); 1rpm (> 10,000 rpm)
Dimensions / Weight
6.2 x 2.3 x 1.6”(160 x 60 x 42 mm) / 5.3oz (151g)
Ordering
RPM33 .............. Combination Contact/Laser Photo Tachometer
Specifications subject to change without notice. Copyright © 2012-2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 1/15/13
www.extech.com