Hygro-Thermometer + InfraRed Thermometer Humidity and Air Temperature measurements Plus InfraRed Thermometer for non-contact surface Temperature Features: Patented • Combination Humidity meter plus InfraRed Thermometer features a super large backlit dual display • Primary and Secondary displays — Primary display is user selectable for IR or Humidity; Secondary always displays ambient temperature • InfraRed thermometer has built in laser pointer and has an 8:1 distance to target ratio • MAX and Data Hold for all functions • Remote humidity sensor with 39" (1m) coiled cable provides readings for both humidity and ambient temperature • Switchable °C/°F temperature units • Auto Power off to save battery life • Low battery and overrange indication • Complete with built-in stand, protective holster, Humidity/Temperature probe, 9V battery, and carrying case Applications: • Monitor Relative Humidity and Temperature in factories, clean rooms, offices, and greenhouses • Non-contact InfraRed surface temperature measurements in hard to reach areas such as heating and air conditioning ducts Specifications Humidity InfraRed Temperature Air Temperature Emissivity Field of View Dimensions Weight Range Max Resolution 10% to 95% 0.1% -58 to 932°F (-50 to 500°C) 0.1° -4 to 140°F (-20 to 60°C) 0.1° 0.95 8:1 5.9 x 2.95 x 1.57" (150 x 75 x 40mm) 7oz (200g) Basic Accuracy ±3.5% ±2% or ±4°F/2°C ±3°F/°C Ordering Information: RH101 ..........................Hygro-Thermometer + InfraRed Thermometer www.extech.com Specifications subject to change without notice. 3/27/09 - R1 Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.