Power Inductors - Shielded CTVLS100805F Series From 1.0 µH to 22 µH www.ctparts.com SPECIFICATIONS Part numbers indicate available inductance tolerance: M = ±20%, N = ±30% Part Inductance Number Marking (µH) CTVLS100805F-1R0N A 1.0 CTVLS100805F-1R5N B 1.5 CTVLS100805F-2R2M C 2.2 CTVLS100805F-3R3M D 3.3 CTVLS100805F-4R7M E 4.7 CTVLS100805F-5R6M F 5.6 CTVLS100805F-6R8M G 6.8 CTVLS100805F-100M CTVLS100805F-220M H I 10 22 L Test Freq. (MHz) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 DCR ±30% (Ω) 0.105 0.153 0.219 0.349 0.507 0.525 0.760 IDC Typ. (mA) 2800 2200 1800 1300 1100 1100 940 Irms Typ. (mA) 2200 1860 1700 1200 1040 1000 940 1.0 1.0 0.915 2.110 820 550 840 540 PHYSICAL DIMENSIONS Size A B C mm inches 2.5±0.2 2.0±0.2 1.2±0.05 0.1±0.008 0.08±0.008 0.05±0.002 B D X A Description: SMD Shielded Power Inductor. Applications: DVCs, DSCs, PDAs, LCD displays, cellular phones, HDDs, etc. Operating Temperature: -25°C to +105°C IDC: For inductance drop 30% from its value without current. Irms: For a 40°C rise above 25°C ambient. Inductance Tolerance: ±20%, ±30% Testing: Inductance is tested on an HP4286A at 1MHz, 200mV. Packaging: Tape & Reel. Marking: Parts are marked with letter identifier. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. 0.8 0.03 C Not Shown at Actual Size CHARACTERISTICS D D Marking: Letter Identifier PAD LAYOUT Unit: mm 2.0 0.85 0.8 0.85 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2011 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 02.01.11