Datasheet

UNISONIC TECHNOLOGIES CO., LTD
UH277
LINEAR INTEGRATED CIRCUIT
COMPLEMENTARY OUTPUTS
HALL EFFECT LATCH IC

DESCRIPTION
The UTC UH277 is a Latch-Type Hall Effect sensor with built-in
complementary output drivers. It’s designed with internal temperature
compensation circuit and built-in protection diode prevent reverse
power fault. The application is aimed for brush-less DC Fan
The UH277 Outputs operate as the Hysteresis Characteristics. The
Outputs alternately ON and OFF when either the magnetic flux
density larger than threshold BOP or the magnetic flux density lower
than BRP.

FEATURES
* Widen Power Supply range from 3V ~ 20V.
* On-chip Hall sensor with excellent hysteresis.
* Open Collector outputs had the sinking capability up to 300mA.
* Output Clamping Diodes reduce the peak output voltages during
switching.
* Build-in reverse protection diode.

ORDERING INFORMATION
Ordering Number
UH277G-G04-K

Package
SIP-4
Packing
Bulk
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 5
QW-R118-003.G
UH277

LINEAR INTEGRATED CIRCUIT
PIN DESCRIPTION
PIN NO. PIN NAME
1
VCC
2
DO
3
DOB
4
VSS

P/I/O
P
O
O
P
DESCRIPTION
Positive Power Supply
Output Pin
Output Pin
Ground
BLOCK DIAGRAM
1
DO
VCC
2
REG.
Hall
Sensor
DOB
3
VSS
4

SENSOR LOCATIONS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R118-003.G
UH277

LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
Supply Voltage
Reverse VCC Polarity Voltage
Output OFF Voltage
Magnetic flux density
Continuous
Output ON Current
Hold
Peak (Start Up)
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
Note 1: Output Zener protection voltage

RATINGS
20
-25
32
Unlimited
0.3
0.4
0.7
500
+150
-20 ~ +85
-65 ~ +150
IC
PD
TJ
TOPR
TSTG
UNIT
V
V
V
A
mW
°C
°C
°C
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
Low Supply Voltage
Supply Voltage
Output Saturation Voltage
Output Leakage Current
Supply Current
Output Rise Time
Output Falling Time
Switch Time Differential

SYMBOL
VCC
VRCC
VCE
B
SYMBOL
VCE
VCC
VCE(SAT)
ICEX
ICC
tR
tF
∆t
TEST CONDITIONS
VCC=3.5V, IL=100mA
MIN
TYP
3
VCC=14V, IL=300mA
VCE=14V, VCC=14V
VCC=20V, Output Open
VCC=14V, RL=820Ω, CL=20pF
VCC=14V, RL=820Ω, CL=20pF
VCC=14V, RL=820Ω, CL=20pF
0.3
<0.1
15
0.3
0.04
0.3
MAX
0.6
20
0.6
10
25
3
1
3
UNIT
V
V
V
μA
mA
μS
μS
μS
MAGNETIC CHARACTERISTICS
A grade
PARAMETR
SYMBOL
BOP
BRP
BHYS
MIN
5
-50
20
TYP
MAX
50
-5
100
UNIT
G
G
G
PARAMETR
SYMBOL
BOP
BRP
BHYS
MIN
5
-70
20
TYP
MAX
70
-5
140
UNIT
G
G
G
PARAMETR
SYMBOL
BOP
BRP
BHYS
MIN
TYP
MAX
100
UNIT
G
G
G
Operate Point
Release Point
Hysteresis
B grade
Operate Point
Release Point
Hysteresis
C grade
Operate Point
Release Point
Hysteresis
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
-100
20
200
3 of 5
QW-R118-003.G
UH277
CHYSTERESIS CHARACTERISTICS
Output Voltage in Volts
Output Voltage in Volts

LINEAR INTEGRATED CIRCUIT

TYPICAL APPLICATION CIRCUIT

TEST CIRCUIT
14V
UH277
DO
RL1
820Ω
RL2
820Ω CL1
20pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
DOB
CL2
20pF
4 of 5
QW-R118-003.G
UH277

LINEAR INTEGRATED CIRCUIT
PERFORMANCE CHARACTERISTICS
TA(°C)
PD (mW)
25
550
50
525
60
515
70
505
80
485
85
475
90
465
95
455
100
445
105
425
110
405
115
385
120
365
Typical Magnetic Switch Point VS.Supply Voltage
75
BHYS
50
BOP
25
0
BRP
-25
5
12
20
24
Supply Current (mA)
Supply Voltage (V)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R118-003.G