NTE1749−1 Integrated Circuit Push−Pull Four Channel Driver with Diodes 16−Lead DIP Description: The NTE1749−1 is a monolithic integrated high voltage, high current four channel driver in a 16−Lead DIP type package designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays, solenoids, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. The NTE1749−1 is suitable for use in switching applications at frequencies up to 5kHz. Features: D 600mA Output Current Capability Per Channel D 1.2A Peak Output Current Per Channel (Non Repetitive) D Enable Facility D Overtemperature Protection D Logical “0” Input Voltage up to 1.5V (High Noise Immunity) D Internal Clamp Diodes Absolute Maximum Ratings: Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V Logic Supply Voltage, VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V Input Voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V Enable Voltage, Ven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V Peak Output Current (Non−Repetitive, t = 100μs), IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2A Total Power Dissipation (Tpins = +90°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4W Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +150°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +150°C Maximum Thermal Resistance, Junction−to−Case RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14°C/W Thermal Resistance, Junction−to−Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W Electrical Characteristics: (Per Channel, VS = 24V, VSS = 5V, TA = +25°C, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Supply Voltage VS VSS − 36 V Logic Supply Voltage VSS 4.5 − 36 V Vi = L, IO = 0, Ven = H − 2 6 mA Vi = H, IO = 0, Ven = H − 16 24 mA Ven = L − − 4 mA Vi = L, IO = 0, Ven = H − 44 60 mA Vi = H, IO = 0, Ven = H − 16 24 mA Ven = L − 16 24 mA −0.3 − 1.5 V VSS ≤ 7V 2.3 − Vss V VSS > 7V 2.3 − 7 V Total Quiescent Supply Current Total Quiescent Logic Supply Current IS IS Input Low Voltage VIL Input High Voltage VIH Low Voltage Input Current IIL VIL = 1.5V − − −10 μA High Voltage Input Current IIH 2.3V ≤ VIH ≤ VSS − 0.6V − 30 100 μA −0.3 − 1.5 V VSS ≤ 7V 2.3 − Vss V Vss > 7V 2.3 − 7 V Enable Low Voltage VenL Enable High Voltage VenH Low Voltage Enable Current IenL VenL = 1.5V − −30 −100 μA High Voltage Enable Current IenH 2.3V ≤ VenH ≤ VSS −0.6V − − ±10 μA Source Output Saturation Voltage VCE(sat)H IO = −0.6A − 1.4 1.8 V Sink Output Saturation Voltage VCE(sat) L IO = 0.6A − 1.2 1.8 V Clamp Diode Forward Voltage VF IO = 600nA − 1.3 − V Rise Time tr 0.1 to 0.9 Vo − 250 − ns Fall Time tf 0.9 to 0.1 Vo − 250 − ns Turn−On Delay Time ton 0.5 Vi to 0.5 Vo − 750 − ns Turn−Off Delay Time toff 0.5 Vi to 0.5 Vo − 200 − ns Pin Connection Diagram Truth Table CE 1 1 Input 1 2 Output 1 3 Input Enable (Note 2) Output H H H L H L H L X (Note 1) Output 2 6 L L X (Note 1) Input 2 7 Note 1. High Output Impedance Note 2. Relative to the Considerate Channel 16 VSS 15 Input 4 14 Output 4 GND 4 13 GND GND 5 12 GND VS 8 11 Output 3 10 Input 3 9 CE 2 16 9 1 8 .787 (20.0) Max .280 (7.1) .201 (5.1) .100 (2.54) .130 (3.3) Min .335 (8.5)