7207

NTE7207
Integrated Circuit
High Output Dual Power Amplifier
Description:
The NTE7207 is a 6V to 15V compatible dual power amplifier in a 15−Lead SIP type package
designed for use in radio cassette players. This device is equipped with standby switching functions
for excellent total harmonic distortion and other basic characteristics.
Features:
D High Output:
POUT = 2.8W (VCC = 9V, RL = 3Ω, THD = 10%)
POUT = 5.0W (VCC = 12V, RL = 3Ω, THD = 10%)
D Excellent Audio Quality:
THD = 0.1% (f = 1kHz, PO = 0.5W)
VNO = 0.3mVrms (Rg = 10kΩ)
RR = 55dB (fRR = 100Hz)
D Wide Supply Voltage Operating Range:
(VCC = 6V to 15V)
D Switching Noise (“POP” Noise) Generated when the Power is Switched ON and OFF is Low
D Ripple Mixing when Motor Starts has been Prevented
D Built−In Thermal Shutdown Circuit
D Built−In Standby Switch. Output is not Influenced by the Standby Pin Voltage
D Soft Clipping
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Supply Voltage (Note 1), VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Power Dissipation (Note 2), Pd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15W
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20° to +75°C
Stoage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55° to +150°C
Note 1. Must be within standby values.
Note 2. TA = +75°C (when using infinite heatsink).
Recommended Operating Conditions: (TA = +25°C unless otherwise specified)
Parameter
Power Supply Voltage
Symbol
VCC
Test Conditions
Min
Typ
Max
Unit
6
−
15
V
Electrical Characteristics: (TA = +25°C, VCC = 9V, RL = 3Ω, RF = 120Ω, Rg = 600Ω, f = 1kHz,
OTL Mode, unless otherwise specified)
Parameter
Quiescent Current
Rated Output Voltage
Symbol
Test Conditions
Min
Typ Max
Unit
IO
VIN = 0Vrms
−
22
45
mA
POUT
THD = 10%
2.2
2.8
−
W
THD = 10%, VCC = 12V
4.0
5.0
−
W
43
45
47
dB
Closed−Loop Voltage Gain
GVC
Output Noise Voltage
VNO
Rg = 10kΩ, DIN Audio
−
0.3
1.0
mVrms
Total Harmonic Distortion
THD
POUT = 0.5W
−
0.1
1.0
%
Ripple Rejection
RR
fRR = 100Hz, VRR = 10dBm
42
55
−
dB
Crosstalk
CT
Vo = 0dBm
48
65
−
dB
Circuit Current (With Standby Switch OFF)
IOFF
−
0
20
μA
Standby Pin Current When ON
ISIN
−
0.15
0.4
mA
VSTH
3.5
−
−
V
VSTL
−
−
1.2
V
Standby Pin Control Voltage
Activated
Not Activated
VSTBY = VCC
Pin Connection Diagram
(Front View)
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Pre−GND 2
Pre−GND 1
NF 2
Input 2
Input 1
NF 1
Filter
Standby
Power GND
Bootstrap 1
Output 1
VCC
Output 2
Bootstrap 2
N.C.
1.181 (30.0)
.118
(3.0)
1.122 (28.5)
.583
(14.8)
.533
(13.55)
1
15
.079 (2.0)
.165
(4.2)