Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MC4580
LINEAR INTEGRATED CIRCUIT
DUAL OPERATIONAL
AMPLIFIER

DESCRIPTION
The UTC MC4580 is the dual operational amplifier, specially
designed for improving the tone control, which is most suitable for
the audio application.
Featuring noiseless, higher gain bandwidth, high output current
and low distortion ratio, and it is most suitable not only for acoustic
electronic parts of audio pre-amp and active filter, but also for the
industrial measurement tools. It is also suitable for the head phone
amp at higher output current, and further more, it can be applied for
the handy type set operational amplifier of general purpose in
application of low voltage single supply type which is properly biased
of the input low voltage source.

FEATURES
*Operating voltage
*Low input noise voltage
*Wide gain bandwidth product
*Low distortion
*Slew rate
*Bipolar technology

(±2V ~ ±18V)
(0.8µVrms typ.)
(15MHz typ.)
(0.0005% typ.)
(5V/µs typ.)
ORDERING INFORMATION
Ordering Number
Lead Free Plating
MC4580L-D08-T
-
Halogen Free
MC4580G-D08-T
MC4580G-S08-R
MC4580G-P08-R
MC4580G-SM1-R
MC4580G-K08-2030-R
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
Package
Packing
DIP-8
SOP-8
TSSOP-8
MSOP-8
DFN-8(2×3)
Tube
Tape Reel
Tape Reel
Tape Reel
Tape Reel
1 of 7
QW-R105-013.H
MC4580

LINEAR INTEGRATED CIRCUIT
MARKING
DIP-8
8
7
6
5
2
3
MSOP-8
Date Code
UTC
MC4580
1
SOP-8
L: Lead Free
G: Halogen Free
Lot Code
4
TSSOP-8

PIN CONFIGURATION

TEST CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
DFN-8(2×3)
2 of 7
QW-R105-013.H
MC4580
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
LINEAR INTEGRATED CIRCUIT
3 of 7
QW-R105-013.H
MC4580

LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (TA=25C)
PARAMETER
Supply Voltage
Input Voltage
Differential Input Voltage
Output Current
RATINGS
UNIT
±18
V
±15
V
±30
V
±50
mA
DIP-8
750
SOP-8
440
Power Dissipation
TSSOP-8
PD
360
mW
MSOP-8
300
DFN-8(2×3)
1300
Junction Temperature
TJ
+125
C
Operating Temperature
TOPR
-40~+85
°C
Storage Temperature
TSTG
-40~+125
C
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

SYMBOL
V+/VVIN
VI(DIFF)
IOUT
ELECTRICAL CHARACTERISTICS (V+ /V-=±15V, TA=25C)
PARAMETER
Input Offset Voltage
Input Offset Current
Input Bias Current
Large Signal Voltage Gain
Output Voltage Swing
Input Common Mode Voltage
Common Mode Rejection Ratio
Supply Voltage Rejection Ratio
Operating Current
Slew Rate
Gain bandwidth Product
Total Harmonic Distortion
Input Noise Voltage
SYMBOL
VI(OFF)
II(OFF)
II(BIAS)
Gv
VOM
VI(CM)
CMRR
SVR
ICC
SR
GB
THD
eN
TEST CONDITION
RS≦10kΩ
MIN
VOUT=±10V, RL≧2kΩ
RL≧2kΩ
90
±12
±12
80
80
RS≦10kΩ
Rs≦10kΩ
RL≧2kΩ
f=10KHz
Gv=20dB,VOUT=5V,RL=2kΩ, f=1KHz
RIAA Rs=2.2 kΩ, 30kHzLPF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP MAX UNIT
0.5
3
mV
5
200
nA
100
500
nA
110
dB
±13.5
V
±13.5
V
110
dB
110
dB
6
9
mA
5
V/µs
15
MHz
0.0005
%
0.8
µVrms
4 of 7
QW-R105-013.H
MC4580
Hz
nV
)
TYPICAL CHARACTERISTICS
(

LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 7
QW-R105-013.H
MC4580
TYPICAL CHARACTERISTICS(Cont.)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
Phase, Ø(deg)
Voltage Gain, AV (dB)
Total Harmonic Distortion, THD (%)

LINEAR INTEGRATED CIRCUIT
6 of 7
QW-R105-013.H
MC4580
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
7 of 7
QW-R105-013.H