V ishay I n terte c h n o l o g y, I n c . INNOVAT I N AND TEC O L OGY IHLP-1212 Series O HN IHLP Inductors ® 19 62-2012 Inductors - IHLP® 1212 Series Low-Profile, High-Current IHLP ® Inductors Resources • • • • Datasheet: IHLP1212AB-11 - http://www.vishay.com/doc?34299 Datasheet: IHLP1212AE-11 - http://www.vishay.com/doc?34300 Datasheet: IHLP1212BZ-11 - http://www.vishay.com/doc?34289 For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components product overview 1/8 VMN-PL0451-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n terte c h n o l o g y, I n c . IHLP-1212AB-11 AND TEC N I INNOVAT O L OGY IHLP-1212 Series O HN IHLP Inductors ® 19 62-2012 Footprint: 3.0 mm x 3.6 mm Height (max): 1.2 mm Saturation current: 6.7 A to 9.3 A 1.2 mm Inductors - IHLP® 1212 Series 3.0 mm 3.6 mm Features • 1212 case size –– 3.0 mm by 3.6 mm footprint • Ultra-low profile of 1.2 mm • High-frequency operation – up to 1 MHz for DC/DC converters • Standard inductance values from 0.22 µH through 0.56 µH • Low typical DCR down to 9.5 mΩ • Saturation current from 6.7 A to 9.3 A • Handle high transient current spikes without hard saturation Applications • Next-generation mobile devices, notebooks, desktop computers, graphics cards, portable gaming devices, personal navigation systems, personal multimedia devices • Low-profile, high-current power supplies and point of load (POL) converters • Distributed power systems and field-programmable gate arrays (FPGAs) • High-current noise suppression filters Standard Electrical Specifications L0 Inductance ± 20 % at 100 kHz, 0.25 V, 0 A (μH) DCR Typ. 25 °C (mΩ) DCR Max. 25 °C (mΩ) Heat Rating Current DC Typ. (A) Saturation Current DC Typ. (A) 0.22 9.5 11.4 9.3 9.3 0.33 12 14.3 7.2 8.7 0.47 16.3 19.5 6.4 7 0.56 18.7 22 5.1 6.7 product overview 2/8 VMN-PL0451-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n terte c h n o l o g y, I n c . IHLP Inductors I INNOVAT IHLP-1212 Series Vishay Dale Low Profile, High Current IHLP® Inductors O L OGY IHLP-1212AB-11 AND TEC N HN O ® 19 62-2012 Performance Graphs PERFORMANCE GRAPHS IHLP-1212AB-11 0.22 μH IHLP-1212AB-11 0.33 μH 0.40 50 30 0.24 20 L 0.12 10 0 2 0.60 4 6 8 40 0.24 30 0.16 10 0 1 2 3 4 5 6 DC BIAS (A) DC BIAS (A) IHLP-1212AB-11 0.56 μH 0.60 0.36 30 L 0.24 20 0.12 10 1 2 3 4 5 6 7 8 9 INDUCTANCE (μH) 40 TEMPERATURE (°C) 0.48 0 product overview 9 0 50 0.48 L 0.36 30 0.24 20 0.12 10 0.00 0 40 0 1 2 3 DC BIAS (A) www.vishay.com 2 8 ΔT °C ΔT °C 0.00 7 IHLP-1212AB-11 0.47 μH 50 20 L 0.08 0.00 0 12 10 0.32 TEMPERATURE (°C) 0.36 INDUCTANCE (μH) 40 TEMPERATURE (°C) ΔT °C 0.48 0.00 INDUCTANCE (μH) Inductors - IHLP® 1212 Series INDUCTANCE (μH) ΔT °C 50 4 5 6 7 8 9 TEMPERATURE (°C) 0.60 0 DC BIAS (A) For technical questions, contact: [email protected] 3/8 Document Number: 34299 Revision: 26-Nov-10 VMN-PL0451-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n terte c h n o l o g y, I n c . IHLP-1212AE-11 INNOVAT I N AND TEC O L OGY IHLP-1212 Series O HN IHLP Inductors ® 19 62-2012 Footprint: 3.0 mm x 3.6 mm Height (max): 1.5 mm Saturation current: 5.3 A to 9.0 A 1.5 mm Inductors - IHLP® 1212 Series 3.0 mm 3.6 mm Features • 1212 case size –– 3.0 mm by 3.6 mm footprint • Ultra-low profile of 1.5 mm • High frequency operation – up to 1 MHz for DC/DC converters • Standard inductance values from 0.22 µH through 1.0 µH • Low typical DCR down to 9.5 mΩ • Saturation current from 5.3 A to 9.0 A • Handle high transient current spikes without hard saturation Applications • Next-generation mobile devices, notebooks, desktop computers, graphics cards, portable gaming devices, personal navigation systems, personal multimedia devices • Low-profile, high-current power supplies and point of load (POL) converters • Distributed power systems; and field-programmable gate arrays (FPGAs) • High-current noise suppression filters Standard Electrical Specifications L0 Inductance ± 20 % at 100 kHz, 0.25 V, 0 A (μH) DCR Typ. 25 °C (mΩ) DCR Max. 25 °C (mΩ) Heat Rating Current DC Typ. (A) Saturation Current DC Typ. (A) 0.22 9.5 11.4 8.5 9 0.33 11.5 13.8 7.8 7 0.47 12.7 15 6.7 6.7 0.56 17 20.4 6 5.5 0.68 18.4 22 5.4 5.5 0.82 22.5 26 4.9 5.5 1 29.5 33 3.9 5.3 product overview 4/8 VMN-PL0451-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n terte c h n o l o g y, I n c . IHLP Inductors I INNOVAT IHLP-1212 Low Profile, High Current IHLP® Inductors Vishay Dale AND TEC Series O L OGY IHLP-1212AE-11 N HN O ® 19 62-2012 Performance Graphs GRAPHS PERFORMANCE 20 0.06 10 6 5 7 8 30 L 0.24 20 0.12 10 1 0 3 2 40 20 0.14 10 5 4 6 7 8 40 L 0.42 0.28 20 0.14 10 0.0 0 0 2 1 3 L 0.42 30 0.28 20 0.14 10 5 6 7 8 9 INDUCTANCE (μH) 40 TEMPERATURE (°C) 0.56 4 6 5 7 8 0 50 ΔT °C 0.72 40 L 0.54 30 0.36 20 0.18 10 0.0 0 1 0 3 2 DC BIAS (A) 4 5 6 7 8 0 DC BIAS (A) IHLP-1212AE-11 1.0 μH 1.0 INDUCTANCE (μH) 4 IHLP-1212AE-11 0.82 μH 0.90 50 ΔT °C 3 30 DC BIAS (A) IHLP-1212AE-11 0.68 μH 2 0 50 0.56 DC BIAS (A) 1 9 50 ΔT °C 0.8 40 L 0.6 30 0.4 20 0.2 10 0.0 0 1 2 3 4 5 6 7 8 9 TEMPERATURE (°C) 3 2 8 ΔT °C 0.28 1 0.70 50 30 0 7 DC BIAS (A) L 0.00 6 IHLP-1212AE-11 0.56 μH 0.42 0.70 5 4 DC BIAS (A) ΔT °C 0 0.36 IHLP-1212AE-11 0.47 μH 0.56 0.0 40 ΔT °C 0.00 0 10 9 0.48 TEMPERATURE (°C) 4 3 50 TEMPERATURE (°C) 2 1 INDUCTANCE (μH) 0 INDUCTANCE (μH) 0.12 0.70 INDUCTANCE (μH) 30 L TEMPERATURE (°C) 0.18 40 TEMPERATURE (°C) INDUCTANCE (μH) 0.24 0.00 INDUCTANCE (μH) Inductors - IHLP® 1212 Series ΔT °C IHLP-1212AE-11 0.33 μH 0.60 50 TEMPERATURE (°C) IHLP-1212AE-11 0.22 μH 0.30 0 DC BIAS (A) www.vishay.com 2 product overview For technical questions, contact: [email protected] 5/8 Document Number: 34300 Revision: 26-Nov-10 VMN-PL0451-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n terte c h n o l o g y, I n c . AND TEC INNOVAT I N O L OGY IHLP-1212 Series O HN IHLP Inductors ® 19 62-2012 IHLP-1212BZ-11 Footprint: 3.0 mm x 3.6 mm Height (max): 2.0 mm Saturation current: 3.3 A to 7.5 A Inductors - IHLP® 1212 Series 2.0 mm Features 3.0 mm • 1212 case size 3.6 mm –– 3.0 mm by 3.6 mm footprint • Ultra-low profiles of 2.0 mm • High frequency operation – up to 1 MHz for DC/DC converters • Standard inductance values from 0.22 µH through 2.2 µH • Low typical DCR down to 9.5 mΩ • Saturation current from 3.3 A to 7.5 A • Handle high transient current spikes without hard saturation Applications • Next-generation mobile devices, notebooks, desktop computers, graphics cards, portable gaming devices, personal navigation systems, personal multimedia devices • Low-profile, high-current power supplies and point of load (POL) converters • Distributed power systems and field-programmable gate arrays (FPGAs) • High-current noise suppression filters Standard Electrical Specifications L0 Inductance ± 20 % at 100 kHz, 0.25 V, 0 A (μH) DCR Typ. 25 °C (mΩ) DCR Max. 25 °C (mΩ) Heat Rating Current DC Typ. (A) Saturation Current DC Typ. (A) 0.22 9.5 11.4 6.5 7.5 0.36 11.5 13.8 6.3 6.5 0.56 16.2 19.4 5.5 5.5 0.68 17 20.4 5.5 5 0.88 18.5 22 5.5 4.5 1 20 24 5 4.5 1.2 23 27 5 4 1.5 28.5 32 3.8 4 2.2 42.9 46 3 3.3 product overview 6/8 VMN-PL0451-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n terte c h n o l o g y, I n c . I INNOVAT IHLP-1212 Series Vishay Dale N Low Profile, High Current IHLP® Inductors AND TEC O L OGY IHLP-1212BZ-11 O HN IHLP Inductors ® 19 62-2012 PERFORMANCE GRAPHS Performance Graphs 0.15 60 0.10 40 0.05 20 4 6 8 0.24 60 0.16 40 0.08 20 0.00 0 12 10 80 L 0 2 4 6 IHLP-1212BZ-11 0.68 μH 0.70 100 0.36 60 0.24 40 0.12 20 0 2 4 6 INDUCTANCE (μH) 80 L TEMPERATURE (°C) INDUCTANCE (μH) 0.48 80 0.56 L 0.42 60 0.28 40 0.14 20 0.00 0 10 8 0 2 4 DC CURRENT (A) 6 0 10 8 DC CURRENT (A) IHLP-1212BZ-11 0.88 μH 1.0 100 ΔT °C ΔT °C 0.00 0 10 8 DC CURRENT (A) IHLP-1212BZ-11 0.56 μH 0.60 IHLP-1212BZ-11 1.0 μH 1.20 100 0.6 60 L 0.4 40 0.2 20 0.0 0 1 3 2 5 4 7 6 8 INDUCTANCE (μH) 80 TEMPERATURE (°C) INDUCTANCE (μH) 0.8 0.96 80 0.72 60 L 0.48 40 0.24 20 0.00 0 1 0 3 2 DC CURRENT (A) 4 5 6 IHLP-1212BZ-11 1.5 μH 1.5 100 0.75 60 40 0.50 1.2 80 L 0.9 60 IHLP-1212BZ-11 40 0.6 Vishay Dale Low Profile, High Current IHLP® Inductors 20 0 1 2 3 4 5 6 7 0.0 0 0 1 2 3 IHLP-1212BZ-11 2.2 μH 100 INDUCTANCE (μH) For technical questions, contact:ΔT [email protected] °C 2.0 80 1.5 60 L 1.0 40 0.5 20 0.0 20 4 5 6 0 DC CURRENT (A) 2.5 www.vishay.com 2 0.3 1 0 2 3 4 5 6 Document Number: 34289 Revision: 07-Jul-10 TEMPERATURE (°C) 0.00 INDUCTANCE (μH) 80 L TEMPERATURE (°C) INDUCTANCE (μH) 1.00 PERFORMANCE GRAPHS DC CURRENT (A) 0 100 ΔT °C ΔT °C 0.25 7 DC CURRENT (A) IHLP-1212BZ-11 1.2 μH 1.25 100 ΔT °C ΔT °C 0 DC CURRENT (A) product overview 7/8 VMN-PL0451-1203 PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY IHLP-1212BZ-11 0.22 μH 20 % IHLP-1212BZ-11 0.36 μH 20 % 80 0.24 L (μH) 0.60 DESCRIBED HEREIN AND THIS DOCUMENT 100 PRODUCTS 100 ARE SUBJECT TO This document is0.30 subject to change without notice. THE SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 (μH) Inductors - IHLP® 1212 Series DC CURRENT (A) TEMPERATURE (°C) 2 0.32 TEMPERATURE (°C) 0 100 ΔT °C TEMPERATURE (°C) 0.00 INDUCTANCE (μH) 80 L TEMPERATURE (°C) INDUCTANCE (μH) 0.20 IHLP-1212BZ-11 0.36 μH 0.40 100 ΔT °C TEMPERATURE (°C) IHLP-1212BZ-11 0.22 μH 0.25 80 0.48 L V ishay I n terte c h n o l o g y, I n c . INNOVAT I N AND TEC O L OGY IHLP-1212 Series O HN IHLP Inductors ® 19 62-2012 Inductors - IHLP® 1212 Series Worldwide Sales Contacts The Americas EUROPE United states Germany Vishay Americas One Greenwich Place Shelton, CT 06484 United States Ph: +1-402-563-6866 Fax: +1-402-563-6296 Vishay Electronic GmbH Dr.-Felix-Zandman-Platz 1 95100 Selb Germany Ph: +49-9287-71-0 Fax: +49-9287-70435 Asia france singapore Vishay intertechnology Asia Pte Ltd. 37A Tampines Street 92 #07-00 Singapore 528886 Ph: +65-6788-6668 Fax: +65-6788-0988 Vishay S.A. 199, bd de la madelEine 06003 nice, cedex 1 France Ph: +33-4-9337-2727 Fax: +33-4-9337-2726 p.r. China united kingdom Vishay China Co., Ltd. 15D, Sun Tong Infoport Plaza 55 Huai Hai West Road Shanghai 200030 P.R. China PH: +86-21-5258 5000 FAX: +86-21-5258 7979 Vishay Ltd. Suite 6C, Tower House St. Catherine’s Court Sunderland Enterprise Park Sunderland SR5 3XJ UNITED KINGDOM Ph: +44-191-516-8584 Fax: +44-191-549-9556 japan VISHAY JAPAN CO., LTD. Shibuya Prestige Bldg. 4F 3-12-22, Shibuya Shibuya-ku Tokyo 150-0002 Japan Ph: +81-3-5466-7150 fax: +81-3-5466-7160 product overview 8/8 VMN-PL0451-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000