Part No. QTHA-1MB0-RS G 1/8" male BSPP (ISO 228/1) x male Quick-test, no checkvalve, brass Connect Female BSPP (ISO 228/1) parallel thread to Quick-test hose for temporary installation Features • Connect Quick-test hoses to any Female BSPP device such as Druck, SI, Fluke or other hand pumps or pressure calibrators • Pressure tight seal is made on a bonded seal ring • Made in USA QTHA-1MB0-RS Specifications Pressure Range 0 to 5000 psi (0 to 345 bar) End C1 1/8" Male BSPP End C2 Male Quick-test Has Check Valve No Maximum Working Temperature 225 °F (107 °C) Construction Brass Seal materials Buna-N Dimensions A 1 in (2.54 cm) Dimensions B 0.56 in (1.42 cm) Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480