HT83XXX Q-VoiceTM Revision # 1.60 Modifications made on November 19, 2008 In the D.C. Characteristics table, the ISTB2, IDD, IOL2 values were modified. In the Product Tape and Reel Specifications section, the Reel Dimensions symbol B value was modified. Revision # 1.50 Modifications made on September 5, 2008 In the Pin Assignment and Pad Description sections, the Power Supply pins have been renamed. At the Package Information section, the 28-pin SOP Outline Dimensions diagram was modified. At The Product Tape and Reel Specifications section, the Carrier Tape Dimensions diagram was modified. Revision # 1.40 Modifications made on May 20, 2008 At the Absolute Maximum Ratings section, the values for the Operating Temperature range was modified. Revision # 1.30 In the Features and other related sections the 20-pin SSOP packages was added. Revision # 1.20 Modifications made on November 16, 2007 Modifications made on April 4, 2007 The features and other related sections were modified. Revision # 1.10 Modifications made on May 25, 2006 The V vs. F Chart (for 3.0V) diagram in the Characteristics Curves section, was modified. The VoiceRom address latch information was modified in the Data Memory section. Revision # 1.00 Modifications made on January 26, 2006 Preliminary texts were deleted from the front page heading and the subsequent pages. At the Characteristics Curves section, the V vs. F Chart (for 4.5V) diagram was modified. Revision # 0.10 Modifications made on August 25, 2003 At the Features section, Mask Option table and other related sections, Low voltage reset was deleted. The PD flag label was changed to PDF flag. R vs. F Characteristics Curve was added. One or two CLR instruction description for Watchdog Timer (WDT) was deleted from the Mask Option table. The Application Circuits diagram was modified. Revision # 0.00 This was posted on February 19, 2003