Power Inductors - Shielded CTEP125S Series From 1.2 µH to 10 µH SPECIFICATIONS Parts are available in ±20% only. * This indicates the current when the inductance decreases to 75% over it’s nominal value or DC current when the temperature rising ΔT=40°C lower, whichever is lower. CTEP125SF Please specify “F” for RoHS compliant Inductance (µH ±20%) L Test Freq. (kHz) CTEP125S_-1R2M CTEP125S_-1R5M CTEP125S_-2R5M CTEP125S_-4R0M CTEP125S_-6R0M CTEP125S_-8R2M 1.2 1.5 2.5 4.0 6.0 8.2 100 100 100 100 100 100 2.5 2.5 3.4 5.4 8.0 11.4 17.0 14.0 10.0 8.3 6.7 5.8 CTEP125S_-100M 10 100 13.5 5.0 Part Number Not shown at actual size. ctparts.com DCR Max. Ω) (mΩ *Current (A) PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Max. 12.9 12.9 5.8 2.6±.2 7.0±.2 4.0±.2 .51 .51 .23 .10±.01 .28±.01 .16±.01 CHARACTERISTICS Description: SMD shielded power inductor Applications: Power supplies for VTR, OA equipment, LCD televisions, PC notebooks, portable communication equipment, DC/DC converters, etc. Operating Temperature: -30°C to +100°C Storage Temperature: -30°C to +100°C Inductance Tolerance: ±20% Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant available. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. PAD LAYOUT CENTRAL Technologies 04.03.07 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2007 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice D E F G H 4.2±.2 2.5±.2 0.17±0.1 .10±.01