UNISONIC TECHNOLOGIES CO., LTD TDA7265 LINEAR INTEGRATED CIRCUIT 25W+25W STEREO AMPLIFIER WITH MUTE & STAND-BY DESCRIPTION The UTC TDA7265 is a stereo 25+25W class AB Dual Audio Power amplifier with mute and ST-BY control. This IC provides high output power of 25 watts per channel (at VCC=±20V, f=1KHz, THD=10%, RL = 8 Ω). It has low IQ at stand-by mode and no POP at turn ON or OFF. FEATURES * High output power: POUT =25 W/channel (Typ.) VCC= ±20V, RL = 8Ω, f =1KHz, THD = 10% * Operation supply voltage range (TA = 25°C) VCC(OPR) = ±5~±25V (RL = 8 Ω) VCC(OPR) = ±5~±18V (RL = 4 Ω) * Split supply * Built in overload protection circuit. * Built in thermal shut down protector circuit. * Built in audio muting circuit (POP free) * Built in standby circuit. ORDERING INFORMATION Ordering Number Lead Free Halogen Free TDA7265L-J11-A-T TDA7265G-J11-A-T Package Packing HZIP-11A Tube TDA7265L-J11-A-T (1) Packing Type (1) T: Tube (2) Package Type (2) J11-A: HZIP-11A (3) Lead Free (3) L: Lead Free, G: Halogen Free www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd 1 of 9 QW-R107-066.B TDA7265 LINEAR INTEGRATED CIRCUIT PIN CONFIGURATION 11 IN+(R) 10 9 IN-(R) GND IN-(L) 8 IN+(L) -VCC 7 6 2 MUTE OUT(L) +VCC OUT(R) 1 -VCC 5 4 3 PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 7 8 9 10 11 PIN NAME -VCC OUT(R) +VCC OUT(L) MUTE -VCC IN+(L) IN-(L) GND IN-(R) IN+(R) DESCRIPTION Negative supply Output(right) Positive Supply voltage Output(left) Mute/standby switch input Negative supply non-inverting input(left) inverting input(left) Ground inverting input(right) non-inverting input(right) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 9 QW-R107-066.B TDA7265 LINEAR INTEGRATED CIRCUIT BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 9 QW-R107-066.B TDA7265 LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage VCC ±25 V Output Power Current (internally limited) IOUT 4.5 A Power Dissipation (TA=70°C) PD 30 W Junction Temperature TJ +150 °C Operating Temperature TOPR -20~85 °C Storage Temperature TSTG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Case SYMBOL θJC RATING 2 UNIT °C/W ELECTRICAL CHARACTERISTICS (VCC =±20V, RL =8Ω, RS =50Ω, GV =30dB, f =1KHz, TA =25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITION Supply Voltage Range VCC Total Quiescent Current IQ INPUT SECTION Input Offset Voltage VI(OFF) Bias Current IBIAS Input Resistance RIN OUTPUT SECTION VCC=±20V, RL= 8Ω THD=10% VCC=±16V, RL= 4Ω Output Power POUT VCC= ±20V, RL= 8Ω THD = 1% VCC=±16V, RL= 4Ω RL= 8Ω, POUT= 1W, f = 1KHz RL= 8Ω, POUT=0.1~ 15W, f = 100Hz ~ 15KHz Total Harmonic Distortion THD RL= 4Ω, POUT= 1W, f = 1KHz RL= 4Ω, VCC= ±16V, POUT=0.1 ~ 12W, f =100Hz ~ 15KHz f = 1KHz Cross Talk CT f = 10KHz Slew Rate SR Open Loop Voltage Gain GVO A Curve Total Output Noise eN f = 20Hz to 22KHz Supply Voltage Rejection SVR f = 100Hz, VR= 0.5V (each channel) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN ±5 TYP 80 -20 15 20 MAX UNIT ±25 V 130 mA 500 20 20 mV nA KΩ 25 25 20 20 0.01 W W W W % 0.7 0.02 70 60 10 80 3 4 60 % % 1 % 8 dB dB V/μs dB μV μV dB 4 of 9 QW-R107-066.B TDA7265 LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER THERMAL PROTECTION Thermal Shut-down Junction Temperature MUTE FUNCTION Mute /Play Threshold Mute Attenuation STAND-BY FUNCTIONS Stand-by Mute threshold Stand-by Attenuation Quiescent Current ( Stand-by) SYMBOL MIN TJ TYP MAX UNIT 145 °C VTMUTE AMUTE -7 60 -6 70 -5 V dB VTST-BY AST-BY IQ(ST-BY) -3.5 -2.5 110 3 -1.5 V dB mA UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITION 5 of 9 QW-R107-066.B TDA7265 LINEAR INTEGRATED CIRCUIT TYPICAL APPLICATION CIRCUIT Typical Application Circuit +VCC D1 10KΩ 5.1V 15KΩ 1μF 1000μF 3 7 OUT (L) IN (L) PLAY 5V 0 MUTE 470μF 4 30KΩ 1μF 5 IN- (L) MUTE Q1 9013 0.1μF 4.7Ω OUT (L) 0.1μF 8 1KΩ IN- (R) 15KΩ 11 470μF 2 IN (R) 30KΩ 1μF OUT (R) 10 1KΩ 1 6 4.7Ω 0.1μF OUT (R) 9 100μF Single Supply Application UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 9 QW-R107-066.B TDA7265 LINEAR INTEGRATED CIRCUIT TYPICAL APPLICATION CIRCUIT(Cont.) Note: Closed loop gain has to be≥25dB Test and Application Circuit (Stereo Configuration) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 9 QW-R107-066.B TDA7265 LINEAR INTEGRATED CIRCUIT MUTE STAND-BY FUNCTION The pin 5 (MUTE/STAND-BY) controls the amplifier status by two different thresholds, referred to +VCC. VPIN5 Amplifier Status +VCC>VPIN5≥+VCC -2.5V Stand-by Mode +VCC -2.5V>VPIN5>+VCC -6V Mute Mode VPIN5≤+VCC -6V Play Mode VPIN5(V) VCC VCC-2.5 VCC-6 VCC-10 IQ(mA) 0 VOUT(V) PLAY ST-BY MUTE UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw ST-BY MUTE 8 of 9 QW-R107-066.B TDA7265 CH1: 10V/div CH2: 5V/div CH2: 10V/div CH1: 5V/div CH1: 10V/div TYPICAL CHARACTERISTICS CH2: 10V/div LINEAR INTEGRATED CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 9 of 9 QW-R107-066.B