4 Line Common Mode Filter ELECTRONICS INC. EPA120 & EPA120G • Impedance limits per chart measured using HP4193A Vector Impedance Meter • Package transfer-molded epoxy suitable for auto-insertion • Part is symmetrical : May be inserted either way • Temperature Rise 45°C Max. @ 25°C Ambient • Maximum Current : 1 Adc/Winding • Hipot : 300 Vac Schematic Impedance Lower Limit 500 8 2 7 450 400 3 6 350 4 5 Impedance 1 421 425 328 326 300 250 200 150 100 50 0 30 50 70 100 Frequency MHz DIP Package White Dot Pin#1 PCA EPA120 D.C. SMD Package .280 Max. White Dot Pin#1 PCA EPA120G D.C. .03 .055 .280 Max. Pad Layout .410 .100 .100 .100 .420 Max. .410 .020 Typ. .175 Typ. .160 .150 Min, .020 x .010 Typ. .390 .01 Typ. .365 Max. .02 .040 .310 Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSA120 & CSA120G Rev. 1 3/3/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com