4 Line Common Mode Choke ELECTRONICS INC. EPA2165S & EPA2165S-RC • IEEE 802.3 and IEEE 802.5 compatible • Robust construction allows IR/VP reflow processes • Add “-RC” after part number for RoHS Compliant • Operating Temperature : 0°C to +70°C • 500 Vrms Hipot Electrical Parameters @ 25° C OCL (µH ± 20%) Leakage Inductance (µH Max.) Interwinding Capacitance (pF Max.) 100 KHz, 0.1 Vrms 100 KHz, 0.1 Vrms 100 KHz, 0.1 Vrms 85 0.25 15 Line to Line Notes : EPA2165S-RC Hot Tin Dip (Sn) † 225°C 3. Moisture Sensitive Levels MSL = 3 (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) DCR (Ω Max.) @ 500 Vdc SnPb 2. Peak Temperature Rating Insulation Resistance (G Ω Min.) 2.5 EPA2165S 1. Lead Finish 4. Weight ET Product (V-uS) 10 Line to Line 0.2 Each Line Schematic 245°C 1 8 2 7 3 6 4 5 MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) TBD grams TBD grams TBD pieces/tube TBD pieces/13” reel TBD pieces/tube TBD pieces/13” reel (*EPA2165STR) (*EPA2165STR-RC) † Leadframe Material : Matte Tin with Ni Barrier Package Typical Impedance .240 (6.09) .085 (2.16) .050 (1.27) .045 (1.14) Marking : PCA EPA2165S(-RC) D.C. Pin 1 I.D. .250 (6.35) .420 (10.67) .150 (3.81) .220 (5.59) .020 (.508) 1600 1400 1200 1000 800 600 400 200 0 Pad Layout 1 10 20 30 .030 (.762) .010/.015 (.254/3.81) .050 (1.27) 40 50 60 70 80 90 100 Frequency (MHz) .008/.012 (.203/.305) 0°-8° .035 (.889) .360 (9.14) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSA2165S & -RC Rev. B2 6/5/06 FT TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com