DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certificate Holder
Manufacturer
Production site
D-04918-M1
1/3
2016-02-11
BRIDGEPOWER CORP
(Gosaek-dong) 16 Omokchen-ro 132beon-gil
Gwonseon-gu
Suwon-si, 441-813 Gyeonggi Korea
SL POWER ELECTRONICS CORP
BLDG A
6050 KING DR
VENTURA, CA 93003 USA
BRIDGEPOWER CORP
(Gosaek-dong) 16 Omokchen-ro 132beon-gil
Gwonseon-gu
Suwon-si, 441-813 Gyeonggi Korea
See Page 2
Certified Product
Model
Trademark
Rated Voltage / Frequency
Rated Current / Power
Insulation Class
Degree of protection (IP)
Tested acc. to
Test Report No.
Additional
Expire date
Certific
Certification
ic
icat
ca ion Manager
Mana
Jan-Erik
Ja
an-Erik Storgaard
Storga
Certification Body
AC/DC Adaptor
(1)E30(2)(3)(4)(5)(6), (1)E40(2)(3)(4)(5)(6), B(1)030(2)(3)(4),
B(1)040(2)(3)(4)
See Page 2
SL POWER ELECTRONICS
Rated Input: 100-240Vac, 50-60Hz,
Rated Input: 1.2A (1.2A - 0.5A)
Class I or II
IP22
EN 60601-1:2006/A11:2011, EN 60601-1:2006/A12:2014, EN
60601-1:2006/A1:2013, EN 60601-1:2006
E302267-D1019-1/A0/C0-CB issued on 2016-02-05
Portable
2026-02-08
This is to certify that representative sample(s) of the Product described herein ("Certified Product") have
been investigated and found in compliance with the Standard(s) indicated on this Certificate, in
accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or
for cables <DEMKO> for the Certified Product manufactured at the production site(s) identified above, in
accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and
Certification Services Service Terms. Only those Products bearing the D Mark should be considered as
being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date,
unless terminated earlier in accordance with the Service Agreement including without limitation if the
Standard identified on this Certificate is amended or withdrawn prior the expiration date.
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
[email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-04918-M1
2/3
2016-02-11
Model Details:
(1)E30(2)(3)(4)(5)(6),(1)E40(2)(3)(4)(5)(6),B(1)030(2)(3)(4),B(1)040(2)(3)(4) (Where (1), (2), (4), (5), (6)
may alphanumeric, "For marketing purpose and no impact safety related critical components and
constructions", where (3) may any number 05 through 48)
Production Sites:
WENDENG JEIL ELECTRONICS CO LTD
Xiamen Road NO.2 Wendeng Economic Development Zone
Weihai City, Shandong Province China
Additional Information:
This certificate replaces the certificate D-04918 issued 2016-02-09 due to missing class info.
Rated Output:
B(1)040(2)(3)(4) and (1)E40(2)(3)(4)(5)(6):
5Vdc,5.0A or 9Vdc,4.0A or 12Vdc,3.4A or 15Vdc,2.7A or 18Vdc,2.22A or 24Vdc,1.7A or 48Vdc,0.83A or 5Vdc/5.0A 48Vdc/0.83A
B(1)030(2)(3)(4) and (1)E30(2)(3)(4)(5)(6):
5Vdc,4.0A or 9Vdc,3.0A or 12Vdc,2.5A or 15Vdc,2.0A or 18Vdc,1.67A or 24Vdc,1.33A or 48Vdc,0.63A or 5Vdc/4.0A 48Vdc/0.63A
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certification Body
D-04918-M1
3/3
2016-02-11
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com