RPM-075PT Sensors Phototransistor, surface mount type RPM-075PT Quite new phototransistor which peak sensitivity is designed as same level as human eye. Best sensor to detect illuminance. (Peak sensitivity is 600nm.) Small and light weight package which can be used for reflow soldering and Pd free soldering. !External dimensions (Units : mm) !Application Control of lighting cellular phones, LCD displays, etc. Control of strobe. (DSC, camcorder, etc.) Unspecified tolerance shall be ±0.1 (0.15) Emitter mark 1.25 !Features 1) Best sensor to detect illuminance. (Peak sensitivity is 600nm.) 2) Small (2125) and light weight package (3mg) which can be used for reflow soldering and Pd free soldering. 3) Linear against wide range of illuminance from a few Lx to 10000Lx over. 4) Use Si good for an environ ment. (not CdS) 1.4 0.25 0.8 2.0 +0.2 −0 1.2 2 1 1 2 Emitter Collector !Absolute maximum ratings (Ta=25°C) Symbol Limits Unit Collector-emitter voltage Parameter VCEO 20 V Emitter-collector voltage VECO 5 V IC 10 mA Collector current PC 50 mW Operating temperature Topr −30∼+85 ˚C Storage temperature Tstg −40∼+100 ˚C Collector power dissipation !Electrical and optical characteristics (Ta=25°C) Symbol Min. Typ. Max. Unit Light current IC 0.25 0.4 0.6 mA VCE=5V, E=500Lx Dark current ICEO − − 0.5 µA VCE=10V (Black box) Parameter λP − 600 − nm VCE(sat) − − 0.4 V Half-angle θ1/2 − ±60 − deg Response time tr·tf − 10 − µs Peak sensitivity wavelength Collector-emitter saturation voltage Conditions − IC=0.1mA, E=500Lx − VCC=5V, IC=1mA, RL=100Ω 1/2 RPM-075PT Sensors !Electrical and optical characteristic curves 1 1000 COLLECTOR CURRENT : IC (mA) 1.2 1 0.8 0.6 0.4 0.2 0 0 250 500 750 1000 E=750Lx 0.5 E=500Lx E=250Lx 0 0 1250 2 3 4 5 COLLECTOR-EMITTER VOLTAGE : VCE (V) Fig.1 Collector current-Illuminance Fig.2 Output characteristics VCE=10V 10 VCE=20V VCE=30V 1 0.1 0.01 −50 −25 0 25 50 75 80 60 40 20 0 400 Fig.4 Dark current-Ambient temperature 500 600 700 800 RELATIVE EMITTING STRENGTH (%) RL=100kΩ 1000 RL=50kΩ RL=20kΩ RL=1kΩ 0.01 0.1 1 10 100 50 75 100 40 20 0 25 50 75 100 AMBIENT TEMPERATURE : Ta (°C) Fig.6 Collector dissipation -Ambient temperature 100 90 80 70 60 50 40 30 20 10 0 −90 25 60 0 −25 900 1000 1100 100 Ta=25C VCC=5V 0 80 Fig.7 Spectral sensitivity characteristics 1000 −25 100 OPTICAL WAVELENGTH : λ (nm) AMBIENT TEMPERATURE : Ta (°C) 100 0.001 1 −50 120 100 100 10 Fig.3 Relative output-Ambient temperature COLLECTOR DISSIPATION : PC (mW) RELATIVE SENSITIVITYT : IC (%) 100 100 AMBIENT TEMPERATURE : Ta (°C) 120 1000 RESPONSE TIME : tr (µs) 1 ILLUMINANCE : E (Lx) 10000 DARK CURRENT : ICEO (nA) E=1000Lx RELATIVE EMITTING STRENGTH (%) COLLECTOR CURRENT : IC (mA) VCE=5V 1.4 RELATIVE COLLECTOR CURRENT : IC (%) 1.6 −60 −30 0 30 60 90 90 80 70 60 50 40 30 20 10 0 −90 −60 −30 0 30 60 COLLECTOR CURRENT : IC (mA) ANGULAR DISPLACEMENT : θ (deg) ANGULAR DISPLACEMENT : θ (deg) Fig.7 Response time-Collector current Fig.8 Directional pattern Fig.9 Directional pattern 90 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0