CA3189 CT ODU ODUCT R P PR TE OLE UTE OBS UBSTIT E LE S CA3089 SSIB PO FM IF System May 1999 [ /Title (CA31 89) /Subject (FM IF System) /Autho r () /Keywords (Harris Semiconductor, FM IF amplifier, quadrat ure detector, tuning meter output, limiter, AFC circuit, AGC circuit, muting circuit, industrial tempera- Features Description • Includes IF Amplifier, Quadrature Detector, AF Preamplifier, and Specific Circuits for AGC, AFC, Tuning Meter, Deviation-Noise Muting, and ON Channel Detector The Harris CA3189E is a monolithic integrated circuit that provides all the functions of a comprehensive FM-lF system. The block diagram of the CA3189E includes a three-stage FM-lF amplifier/limiter configuration with level detectors for each stage, a doubly-balanced quadrature FM detector and an audio amplifier that features the optional use of a muting (squelch) circuit. • FM IF Amplifier Applications in High-Fidelity, Automotive, and Communications Receivers • Exceptional Limiting Sensitivity -12µV (Typ) at -3dB Point The advanced circuit design of the IF system includes desirable deluxe features such as programmable delayed AGC for the RF tuner, an AFC drive circuit, and an output signal to drive a tuning meter and/or provide stereo switching logic. In addition, internal power-supply regulators maintain a nearly constant current drain over the voltage supply range of +8.5V to +16V. • Low Distortion -0.1% (Typ) (with Double-Tuned Coil) • Single-Coil Tuning Capability • Improved S + N/N Ratio • Externally Programmable Recovered Audio Level • Provides Specific Signal for Control of Interchannel Muting (Squelch) The CA3189E is ideal for high-fidelity operation. Distortion in a CA3189E FM-lF System is primarily a function of the phase linearity characteristic of the outboard detector coil. The CA3189E has all the features of the CA3089E plus additions. See CA3189E features compared to the CA3089E in Table 1. • Provides Specific Signal for Direct Drive of a Tuning Meter • On Channel Step for Search Control • Provides Programmable AGC Voltage for RF Amplifier Part Number Information • Provides a Specific Circuit for Flexible Audio Output • Internal Supply Voltage Regulators PART NUMBER • Externally Programmable “On” Channel Step Width, and Deviation at Which Muting Occurs TEMP. RANGE (oC) CA3189E -40 to 85 PKG. NO. PACKAGE 16 Ld PDIP E16.3 Pinout CA3189 (PDIP) TOP VIEW IF IN 1 16 2 15 3 14 SUBSTRATE (GND) INPUT BYPASS DELAYED AGC 13 TUNING METER OUT 12 MUTE LOGIC FRAME 4 MUTE CONTROL 5 11 V+ AUDIO OUT 6 10 REF BIAS AFC OUT 7 9 IF OUT 8 QUADRATURE INPUT CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. 1-800-4-HARRIS or 407-727-9207 | Copyright © Harris Corporation 1999 1 File Number 1046.4 CA3189 Absolute Maximum Ratings Thermal Information DC Supply Voltage (Between Terminals 11 and 4) . . . . . . . . . . . . . . . . . . . . . . . . 16V (Between Terminals 11 and 14) . . . . . . . . . . . . . . . . . . . . . . . 16V DC Current (Out of Terminal 15) . . . . . . . . . . . . . . . . . . . . . . . . 2mA Thermal Resistance (Typical, Note 1) θJA (oC/W) PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Maximum Junction Temperature (Plastic Package) . . . . . . . . 150oC Maximum Storage Temperature Range . . . . . . . . . -65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC Operating Conditions Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. θJA is measured with the component mounted on an evaluation PC board in free air. Electrical Specifications TA = 25oC, V+ = 12V PARAMETER SYMBOL TEST CONDITIONS CIRCUIT OR FIG. NO. MIN TYP MAX UNITS 1, 2 20 31 40 mA DC SPECIFICATIONS Quiescent Circuit Current I11 DC Voltages No Signal Input, Non Muted No Signal Input, Non Muted Terminal 1 (IF Input) V1 1, 2 1.2 1.9 2.4 V Terminal 2 (AC Return to Input) V2 1, 2 1.2 1.9 2.4 V Terminal 3 (DC Bias to Input) V3 1, 2 1.2 1.9 2.4 V Terminal 15 (RF AGC) V15 1, 2 7.5 9.5 11 V Terminal 10 (DC Reference) V10 1, 2 5 5.6 6 V 1, 2 - 12 25 µV 1, 2 45 55 - dB 1, 2 325 500 650 mV 1 - 0.5 1 % 2 - 0.1 - % 1, 2 65 72 - dB 1, 5, 6 - ±40 - kHz 1, 2 - 1.25 - V fDEV < ±40kHz 1 - 0 - V fDEV > ±40kHz 1 - 5.6 - V DYNAMIC SPECIFICATIONS Input Limiting Voltage (-3dB Point) AM Rejection (Terminal 6) Recovered AF Voltage (Terminal 6) VI(lim) AMR VIN = 0.1V, AM Mod. = 30% fO = 10.7MHz, fMOD. = 400Hz, Deviation ±75kHz VO(AF) Total Harmonic Distortion (Note 2) Single Tuned (Terminal 6) THD Double Tuned (Terminal 6) THD Signal Plus Noise to Noise Ratio (Terminal 6) S + N/N Deviation Mute Frequency fDEV RF AGC Threshold V16 On Channel Step V12 VIN = 0.1V VIN = 0.1V fMOD = 0 VIN = 0.1V NOTE: 2. THD characteristics are essentially a function of the phase characteristics of the network connected between Terminals 8, 9, and 10. 2 CA3189 TABLE 1. CA3189E FEATURES COMPARED TO CA3089E FEATURES CA3189E CA3089E Low Limiting Sensitivity (12µV Typ) Yes Yes Low Distortion Yes Yes Single-Coil Tuning Capability Yes Yes Programmable Audio Level Yes No S/N Mute Yes Yes Deviation Mute Yes No Flexible AFC Yes Yes Programmable AGC Threshold and Voltage Yes No Typical S + N/N > 70 dB Yes No Meter Drive Voltage Depressed at Very Low Signal Levels Yes No On-Channel Step Control Voltage Yes No Test Circuits 3K 100 pF C1 L (NOTE 4) V+ = 12V 0.05µF 11 22µH C V+ = 12V 8.2K 3.9K 10 1 10µF AFC 7 OUT 51 3 16 TO PIN 13 47K 1µF 13 0.01 µF 15 14 4 0.01 µF 10 K TUNING METER 9 10µF 8.2K 1 10 10µF AFC 5K 7 OUT 51 AUDIO OUT 0.02 µF 470 TO PIN 13 47K 0.33µF 10K 33K 150µA FULL SCALE 6 CA3189E 0.01 µF 5 13 2 15 16 22K 8.2K 100 pF 8 3 C 12 (NOTE 5) 5 0.01 µF 2 5K 6 CA3189E 11 SIGNAL 0.01µF INPUT VOLTAGE 9 SIGNAL 0.01µF INPUT VOLTAGE 0.02 µF 0.05µF 10µF 100 pF 8 T (NOTE 7) C2 22µH 14 4 1µF 0.01 µF 0.01 µF 10 K TUNING METER C 12 (NOTE 9) AUDIO OUT 470 22K 10K 0.33µF 33K 150µA FULL SCALE NOTES: 6. All resistance values are in ohms. 7. T: PRI. - Q0 (unloaded) ≅ 75 (tunes with 100pF (C1) 20↑ of 34e on 7/ ” dia. form. SEC. - Q (unloaded) ≅ 75 (tunes with 100pF (C ) 32 0 2 20↑ of 34e on 7/32” dia. form. kQ (percent of critical coupling) ≅ 70% (Adjusted for coil voltage (VC) = 150mV). NOTES: 3. All resistance values are in ohms. 4. L tunes with 100pF (C) at 10.7MHz. Q0 (unloaded) ≅ 75 (TOKO No. KACS K586HM or equivalent). 8. Above values permit proper operation of mute (squelch) circuit “E” type slugs, spacing 4mm. 5. C = 0.01µF for 50µs deemphasis (Europe). C = 0.015µF for 75µs deemphasis (USA). 9. C = 0.01µF for 50µs deemphasis (Europe) C = 0.015µF for 75µs deemphasis (USA). FIGURE 1. TEST CIRCUIT FOR CA3189E USING A SINGLETUNED DETECTOR COIL FIGURE 2. TEST CIRCUIT FOR CA3189E USING A DOUBLETUNED DETECTOR COIL 3 CA3189 Block Diagram L (NOTE 11) QUADRATURE INPUT 22µH V+ TO INTERNAL REGULATORS 11 OUT 8 C= 100pF 9 REFERENCE BIAS 10 8.2K CA3189E IF INPUT IF AMPLIFIER 1 1ST IF AMPL. 2ND IF AMPL. 3RD IF AMPL. FM DETECTOR 0.02µF 2 LEVEL DETECTOR LEVEL DETECTOR LEVEL DETECTOR LEVEL DETECTOR DEVIATION MUTE LOGIC DELAYED AGC FOR RF AMPL 15 DELAYED RF AGC TUNING METER CIRCUIT 10K 7 AUDIO AMPL. 6 AUDIO MUTE (SQUELCH) CONTROL AMPL. 5 QUADRATURE DETECTOR 3 0.02 µF AFC AMPL. MUTE (SQUELCH) DRIVE CIRCUIT FRAME SUBSTRATE 16 4 14 150µA METER 13 33K TUNING METER OUTPUT AFC OUTPUT AUDIO OUTPUT 22K MUTING SENSITIVITY 470 12 10K 0.33µF TO STEREO THRESHOLD LOGIC CIRCUITS ON CHANNEL INDICATOR 47K NOTES: 10. All resistance values are in Ω. 11. L Tunes with 100pF (C) at 10.7MHz. QO ≅ 75 (TOKO No. KACS K586HM or equivalent). 4 5K CA3189 Schematic Diagrams IF AMPLIFIER A Q9 A Q15 Q21 C R6 2K R10 2K R7 2K C12 1 C11 1 C13 1 R19 2K R18 2K R11 2K R27 750 Q22 R23 2K B R24 500 C14 1 B R25 1.52K V+ Q3 V+ Q4 V+ Q19 Q7 Q8 Q8A IF INPUT Q2 Q1 1 R13A 2.1K Q10 Q11 Q16 Q17 R16A 2.2K Q12 2 INPUT BYPASSING R13 2.1K Q6 R2 2.8K R3 533 Q18 R16 2.8K R17 533 R12 2.1K R14 533 R20 2K Q13A Q14A R12A 2.1K Q20 R 28 750 Q13 Q14 Q7A R15A 2.2K C R21 500 R22 1.52 K R15 2.8K 3 R1 2.8K V+ V+ R82 15.6K R51 5K C5 2 Q107 Q108 D8 R80 4.12K Q106Q105 R84 1K 880Ω R81 1.28K R59 212 C7 3 C6 3 Q 61 C8 3 Q64 Q63 Q60 Q59 R52 400 D Q74 Q68 Q75 R60 424 Q77 Q69 Q62 Q70 R53 600 Q84 Q76 R56 600 R83 500 E R61 4K R61A 1.1K D1 R62 5K F 15 16 AGC FOR RF AMPL. 13 LEVEL DETECTOR AND METER CIRCUIT 5 TUNING METER CA3189 Schematic Diagrams (Continued) CA3189E REF BIAS 10 QUADRATURE 9 INPUT A AUDIO AMPL. IF 8 OUT DETECTOR R33 500 D6 R32 500 R37 600 Q35 Q23 B Q24Q25 R31 390 R44 400 Q50 R42 600 Q50A Q46 Q53 Q45 Q51 Q54 R34 10K Q26 Q34 Q38 Q39 R63 425 Q48 Q48A V+ R35 2.2K D3 D2 Q44 Q32Q33 R26 10K R38 400 Q79 Q40 C Q49AQ49 V+ Q80 6 Q82 Q27 R29 200 R65 3.9K Q81 R64 425 Q41 R67 10.1K R36 200 Q83 R40 1K R41 1K R66 550 5 R9 9.6K Q28 Q5 Z1 Q30 A C B R5 3.8K R8 Q29 1.9 K R 30 533 D5 D Q31 D4 Q66 E Q71 R57 11.8K Q72 F R54 3K Q73 R58 50 Q102 R39 400 Q96 Q95 Q65 C9 10 Q94 R55 17K Q67 C10 34 Q43 Q103 R74 R73 1K 1K C15 10 BIAS SUPPLY R70 6.96 K Q78 R76 1K 7 V+ Q98 Q55 Q97 Q104 Q93 Q91 R71 1K R72 R73 1K 1K Q52 Q56 R77 1K Q92 V+ R43 400 Q47 Q100 Q101 R4 700 R89 10 Q90 Z2 D1 R90 5K R45 500 V+ R78 1.08K R47 667 Q57 R48 667 Q99 R79 1.08K Z3 12 DEVIATION MUTE DETECTOR AND AFC AMPLIFIER MUTE DRIVE 6 CA3189 o Typical Application 1.8K 1.8K 10nF 10nF 3.3K 390 3.3K +12V 10nF L (NOTE 14) 47Ω 390 100 pF 10K 68K AFT 3.9K 8.2K 10µF 22µH 11 (NOTE 13) CF (NOTE 13) CF Q1 10nF 10µF 8 9 10 Q2 1 10.7MHz 7 12K 390 FROM TUNER 1nF 3 AUDIO 2.2K 470 10nF 2.2K 470 10nF 6 CA3189E 10nF 2 10nF 4 5 12 13 16 470 15 10nF 33K 10K 47K 10nF 47K 47µF 10K 2.2µF 3.9nF 100nF RF AGC 0V TUNING NOTES: 12. All resistance values are in ohms. 13. CF: Ceramic filters, TOKO CSFE or equivalent. 14. L tunes with 100pF (C) at 10.7MHz. Q0 (unloaded) ≅ 75 (TOKO No. KACS K586HM or equivalent). FIGURE 3. COMPLETE FM IF SYSTEM FOR HIGH QUALITY RECEIVERS 7 CA3189 o V+ = 12V, TA = 25oC 0 SEE FIGURE 1 RECOVERED AUDIO FROM FULL OUTPUT (LEFT COORDINATE) -10 -60 1 8 6 4 VOLTAGE AT TERM. 13 METER CIRCUIT (33kΩ TO GND) (RIGHT COORDINATE) 10 100 CURRENT INTO TERMINAL 7 (µA) -30 -50 10 TUNER AGC DC VOLTAGE AT TERM. 15 (RIGHT COORDINATE) (PIN 15 TO PIN 13) -20 -40 V+ = 12V, TA = 25oC 12 DC VOLTS RECOVERED AUDIO (dB) MUTING CONTROL AT MAX. RESISTANCE Typical Performance Curves 2 1K 10K 200 10 150 SEE FIGURE 1 50 0 -50 -100 -50 INPUT SIGNAL (µV) 0 50 100 CHANGE IN FREQUENCY (kHz) 150 FIGURE 5. AFC CHARACTERISTICS (CURRENT AT TERMINAL 7 vs CHANGE IN FREQUENCY) 0 V+ = 12V, TA = 25oC 140 -10 120 RELATIVE OUTPUT (dB) DEVIATION MUTE THRESHOLD (kHz) FIGURE 4. MUTING ACTION, TUNER AGC, AND TUNING METER OUTPUT vs INPUT SIGNAL VOLTAGE µA 100 -150 -100 100K 7 5kΩ 100 80 60 40 20 SIGNAL (DEVIATION = ±75kHz) -20 CA3189E ONLY -30 CA3189E PRECEDED BY FILTER AND GAIN STAGE -40 CA3189E PRECEDED BY 2 FILTER AND GAIN STAGES -50 NOISE -60 -70 -80 0 5 10 15 20 25 1 10 102 103 104 105 SIGNAL LEVEL (µV) LOAD RESISTANCE (BETWEEN TERM. 7 AND TERM. 10) (kΩ) FIGURE 6. DEVIATION MUTE THRESHOLD vs LOAD RESISTANCE (BETWEEN TERMINAL 7 AND TERMINAL 10) FIGURE 7. TYPICAL LIMITING AND NOISE CHARACTERISTICS All Harris semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Harris semiconductor products are sold by description only. Harris Semiconductor Communications Division reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Harris is believed to be accurate and reliable. However, no responsibility is assumed by Harris or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Harris or its subsidiaries. For information regarding Harris’ Semiconductor Communications Division and its products, call 1-800-4-HARRIS or see web site http://www.semi.harris.com Sales Office Headquarters NORTH AMERICA Harris Semiconductor Communications Division P. O. Box 883, Mail Stop 53-210 Melbourne, FL 32902 TEL: 1-800-442-7747 (407) 727-9207 FAX: (407) 724-3973 EUROPE Harris Semiconductor Communications Division Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 8 ASIA Harris Semiconductor Communications Division Taiwan Limited. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029