Tooling Catalog

Assembly Tools For
Eddie Bolt™ System
•
•
•
•
Pneumatic Assembly Tools
Hand Assembly Tools
Accessories
Inspection Gauges
Rev: 01
01-30-2015
30 2015
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Eddie Bolt™ Applications
Table of Contents
Power Installation Tools
Accessories For Power Tools
Hand Installation Tools
Removal Tools
Inspection Gauges
Section 1
Section 2
Section 3
Section 4
Section 5
Sales & Service:
Alcoa Fastening Systems
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA 92831 USA
714-278-8908 Customer Service
714-871-4821 FAX
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Eddie Bolt™ Applications
Power
Installation Tools
SECTION 1
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
Smallest Package, Increased Power !
9.5 in.
8 5 in
8.5
in.
Weight: 1.6 lbs [0.7kg]
Power: 0.4+ hp
E
Example
l Sh
Shown Above:
Ab
ETL1109C06D06SPK
Note: This is the new pistol grip motor available in the
following tool models for all -5, -6 & -8 diameters:
• ETL1108
• ETL1109 (Not intended for -8 diameter fasteners)
• ETL1129
• ETL1110
• ETL1111
• ETL2000
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
A
L
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETL1108
ETL1110
3
1.27 [32.3mm]
.47 [11.9mm]
.61 [15.4mm]
2.12 [53.8mm]
.35 [8.9mm]
3
1.33 [33.8mm]
.47 [11.9mm]
.61 [15.4mm]
2.26 [57.4mm]
.43 [10.8mm]
Model ET1108 flush socket g
gears available in 05 & 06 diameters only.
y
Model ET1110 is designed for use with a flush socket gear up to the 08 dia.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 3
Spline Keys
(Table 1, Accessories) (See Table 5, Accessories)
Code Extension
Code
Size
A
Flush
05SPK 5/32" Dia. Spline
p
Bit
D
0.5"
06SPK 3/16" Dia. Spline Bit
G
1.0"
08SPK 1/4" Dia. Spline Bit
J
2.0"
L
3.0"
Table 2
Ext'd.Socket Length
Table 4
Drive Shaft Extended Length
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example of Complete Tool Model Number:
ETL1110 C 08 A 08SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
ETL1129
5
A
H1
H2
L
W
2.68"
.47"
.61"
3.53"
1.0"
[68.1mm] [11.9mm] [15.4mm] [89.7mm] [25.4mm]
R
.35"
[8.9mm]
• Model ETL1129 is designed for installation of ‐5, ‐6, ‐8 diameter fasteners with use of extended sockets.
• Model ETL1129 has the capability for flush socket gears on 05 & 06 diameters only
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 3
Spline Keys
(Table 1, Accessories) (See Table 5, Accessories)
Code
Size
Code Extension
05SPK
5/32"
Dia.
Spline Bit
A
Flush
06SPK 3/16" Dia. Spline Bit
D
0.5"
08SPK 1/4" Dia. Spline Bit
G
1.0"
J
2.0"
L
3.0"
Table 2
Ext'd.Socket Length
Table 4
Drive Shaft Extended Length
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example of Complete Tool Model Number:
ETL1129 C 08 D 08SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model N
Number
mber
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETL1109
5
2.68 [68.1mm]
.47 [11.9mm]
.61 [15.4mm]
3.53 [89.7mm]
.35 [8.8mm]
• Model ETL1109 is designed for installation of ‐5, ‐6, diameter fasteners with use of extended sockets.
• Model ETL1109 has the capability for flush socket gears on 05 & 06 diameters only
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
5/32
06
3/16"
Table 2
Ext'd.Socket Length
(Table 1, Accessories)
Code
A
D
G
J
L
Extension
Flush
0.5"
1.0"
2.0"
3.0"
Table 3
Spline Keys
Table 4
Drive Shaft Extended Length
(See Table 5, Accessories)
Code
Size
05SPK 5/32" Dia
Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example of Complete Tool Model Number:
ETL1109 C 06 D 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model N
Number
mber
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETL1111
5
2.75 [69.9mm]
.37 [9.4mm]
.61 [15.4mm]
3.68 [93.3mm]
.43 [10.8mm]
Model ETL1111 is designed for use with a flush socket gear or extended sockets
sockets.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
5/32
06
3/16"
08
1/4"
Table 3
Spline Keys
(Table 1, Accessories) (See Table 5, Accessories)
Code
Size
Code Extension
05SPK
5/32"
5/32
Dia.
Spline Bit
A
Flush
06SPK 3/16" Dia. Spline Bit
D
0.5"
08SPK 1/4" Dia. Spline Bit
G
1.0"
J
2.0"
L
3.0"
Table 2
Ext'd.Socket Length
Table 4
Drive Shaft Extended Length
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example of Complete Tool Model Number:
ETL1111 C 08 A 08SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
Reverse Drive
Socket
L
A
H2
M o del
Number
No . o f
Gears
A
H1
H2
L
R
W
ETL1115
6
3.38 [85.9mm]
.47 [11.9mm]
.61 [15.4mm]
4.20 [106.7mm]
.32 [8.2mm]
1.0 [ 25.4mm]
Table 2
Table 1
Ext'd. So cket Length
Eddie Bolt
Socket
Fastener Diameter Dia. Code Socket
Lengt h
Number
Dash
Dia.
D
1/ 2"
463-9051
05
5/32"
G
1.0"
463-9052
-05
J
2.0"
463-9054
06
3/16"
-06
L
D
G
J
L
3.0"
3
0"
1/ 2"
1.0"
2.0"
3.0"
463-9056
463
9056
463-9061
463-9062
463-9064
463-9066
Table 4
Drive Shaft Extended Length
Table 3
Spline Bits
(See Table 5, Accessories)
Code
Size
05SPK 5/32" Dia. SPK Bit
06SPK 3/16" Dia. SPK Bit
Code Length Index Unit
C
2.0" With
D
2 0" Without
2.0
G
6.0" With
H
6.0" Without
Example of Complete Tool Model Number:
ETL1115 C 06 D 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
Reverse Drive
Socket
L
A
H2
Model
Number
No. of
Gears
ETL1117
6
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
A
H1
H2
L
W
R
4.24"
1.0"
.35"
3.39"
.47"
.61"
[86.1mm] [11.9mm] [15.4mm] [107.7mm [25.4mm] [8.9mm]
Table 2
Ext'd.Socket Length
(Table 1, Accessories)
Code
A
D
G
J
L
Extension
Flush
0 5"
0.5
1.0"
2.0"
3.0"
Table 3
Spline Keys
Table 4
Drive Shaft Extended Length
(See Table 5, Accessories)
Code
Size
05SPK 5/32" Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example of Complete Tool Model Number:
ETL1117 C 06 D 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
A
H1
ET1020
5
3.38 [85.9mm]
.68 [17.3mm]
H2
L
R
1.28 [32.5mm] 4.44 [113.0mm]
.50 [12.7mm]
The above
abo e tool model is designed for use
se with
ith a fl
flush
sh socket gear or e
extended
tended sockets
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
10
5/16"
Table 2
Ext'd.Socket Length
Table 3
(Table 2, Accessories)
(See Table 5, Accessories)
Code
Size
10SPK 5/16" Dia. Spline Bit
Code
A
E
G
J
L
Extension
Flush
5/8"
1.0"
2.0"
3.0"
Table 4
Drive Shaft Extended Length
Spline Keys
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example
E
ample of Complete Tool Model N
Number:
mber
ET1020 C 10 G 10SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pistol Grip Tools For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ET1015
3
1.62 [41.1mm]
.68 [17.3mm]
1.28 [32.5mm]
2.69 [68.3mm]
.50 [12.7mm]
The above tool model is designed for use with a flush socket gear or extended sockets
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
10
5/16"
Table 2
Ext'd.Socket Length
Table 3
(Table 2, Accessories)
(See Table 5, Accessories)
Code
Size
10SPK 5/16" Dia. Spline Bit
Code
A
E
G
J
L
Extension
Flush
5/8"
1.0"
2.0"
3.0"
Table 4
Drive Shaft Extended Length
Spline Keys
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example of Complete Tool Model Number:
ET1015 C 10 G 10SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Straight Pistol Grip Tools For
Eddie Bolt™ Applications
Tool Data:
Total Tool Length: 9.8” [ 250.8mm ] without socket
Total Wt: 2.46 lbs [ 1.56 kg ] with socket
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
3/16
08
1/4"
Table 3
Spline Keys
Table 2
Ext'd.Socket Length
Code
J
L
Extension
2.0"
3.0"
3.0
Code
Size
05SPK 5/32" Dia. Spline Bit
06SPK 3/16
3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Example of Complete Tool Model Number:
ETL2000B 06 J 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Hex Size (Table 1)
Tool Model Number
Tool Models: ET(L)2000, ET2000
Fastener
Diameter
Di
t
-5
-6
-8
Socket
Number
N
b
463-9600
463-9601
463-9602
463-9603
463-9604
463-9605
Socket
L
Length
th
Socket
C d
Code
2.0"
3.0"
2.0"
3.0"
2.0"
3.0"
J
L
J
L
J
L
"A" Dia.
R f
Ref.
0.53"
0.56"
0.65"
Spline-Lok
Spline
Lok Key
493-9600
493-9601
493-9602
493-9603
493-9604
493-9605
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETL3109A
5
2.68 [68.1mm]
.47 [11.9mm]
.61 [15.4mm]
3.53 [89.7mm]
.35 [8.8mm]
Model ELT3109A is designed for use with extended sockets or flush socket gears
on -05 & -06 diameters only.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 2
Ext'd.Socket Length
(Table 1, Accessories)
Code
C
d
A
D
G
J
L
Extension
E
t
i
Flush
0.5"
1.0"
2.0"
3.0"
Table 3
Spline Keys
(See Table 5, Accessories)
Code
Si e
Size
05SPK 5/32" Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Example of Complete Tool Model Number:
ETL3109A 08 D 08SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETL3129A
5
2.68 [68.1mm]
.47 [11.9mm]
.61 [15.4mm]
3.53 [89.7mm]
.35 [8.8mm]
Model ELT3129A is designed for use with extended sockets on all sizes. Flush sockets
can only be used with the -05 and -06 diameters.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 2
Ext'd.Socket Length
(Table 1, Accessories)
Code
C
d
A
D
G
J
L
Extension
E
t
i
Flush
0.5"
1.0"
2.0"
3.0"
Table 3
Spline Keys
(See Table 5, Accessories)
Code
Si e
Size
05SPK 5/32" Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Example of Complete Tool Model Number:
ETL3129A 08 D 08SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H1
R
Flush Socket Gear Applications
L
A
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETL3110A
3
1.33 [33.8mm]
.47 [11.9mm]
.61 [15.4mm]
2.26 [57.4mm]
.43 [10.8mm]
ETL3111A
5
2.75 [[69.9mm]]
.47 [[11.9mm]]
.61 [[15.4mm]]
3.68 [[93.3mm]]
.43 [[10.8mm]]
Models ELT3110 & ELT3111 are designed for use with a flush socket gear or with
extended sockets.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 2
Ext'd.Socket Length
(Table 1, Accessories)
Code
C
d
A
D
G
J
L
Extension
E
t
i
Flush
0.5"
1.0"
2.0"
3.0"
Table 3
Spline Keys
(See Table 5, Accessories)
Code
Si e
Size
05SPK 5/32" Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Example of Complete Tool Model Number:
ETL3111A 08 A 08SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H2
H1
R
L
A
W
Model
Number
No. of
Gears
A
H1
H2
(Ref)
W
L
R
ETL3118
7
4.05
[102.8mm]
.47
[11.9mm]
.78
[19.8mm]
1.0
[25.4mm]
4.9
[124.5mm]
.35
[8.8mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Note: 08 Dia. Not available
with a flush socket gear
Table 2
Ext'd.Socket Length
Table 3
(Table 1, Accessories)
(See Table 5, Accessories)
Code
Size
000 No Spine Bit
05SPK 5/32" Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Code
A
D
G
J
L
Extension
Flush
0.5"
1.0"
2.0"
3.0"
Spline Keys
Example
E
l off Complete
C
l t T
Tooll M
Model
d lN
Number:
b
ETL3118A 06 E 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H2
H1
R
L
A
Flush Socket Gear Applications
W
Model
Number
No. of
Gears
A
H1
H2
(Ref)
W
L
R
ETL3131
7
4.11
[104.4mm]
.47
[11.9mm]
.78
[19.8mm]
1.0
[25.4mm]
4.97
[126.2mm]
.43
[10.8mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
08
1/4"
Table 2
Ext'd.Socket Length
(Table 1, Accessories)
Code
A
D
G
J
L
Extension
Flush
0.5"
1.0"
2.0"
3.0"
Table 3
Spline Keys
(See Table 5, Accessories)
Code
Size
000 No Spine Bit
08SPK 1/4" Dia. Spline Bit
Example
E
l off Complete
C
l t T
Tooll M
Model
d lN
Number:
b
ETL3131A 08 A 08SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H1
R
L
A
Note: Uses LTV28N30-10
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ET3198A
5
3.27 [83.1mm]
.50 [12.7mm]
.65 [16.7mm]
4.3 [110.0mm]
.437 [11.1mm]
Model ET3198A is designed for use with extended sockets
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
10
5/16"
Table 2
Ext'd.Socket Length
Code
E
G
J
L
Length
5/8"
1.0"
2.0"
3.0"
Socket No
No.
Spline-Lok Bit
Example of Complete Tool Model Number:
ETL3198A 10 G 10SPK
Spline-Lok® Bit Size (Table 2)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H1
R
L
A
Atlas Copco
p Motor: LTV38N68 Mod.
200 RPM
H2
20.5”
Model
Number
No. of
Gears
A
H1
H2
L
R
ET3492A
5
3.00 [76.2mm]
.69 [17.5mm]
.94 [23.9mm]
4.19 [106.4mm]
.56[14.2mm]
Model ET3492A is designed for use with a flush socket gear or extended sockets
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
10
5/16"
Table 2
Ext'd.Socket Length
(Table 3, Accessories)
Code
A
E
G
J
L
Extension
Flush
5/8"
1.0"
2.0"
3.0"
Table 3
Spline Keys
(See Table 5, Accessories)
Code
Size
10SPK 5/16" Dia. Spline Bit
Example of Complete Tool Model Number:
ET3492A 10 G 10SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H1
R
L
A
Atlas Copco Motor: LTV38N68-Mod.
200 RPM
H2
20.5”
Model
Number
No. of
Gears
A
H1
H2
L
R
ET3472A
5
3 00 [76
3.00
[76.2mm]
2 ]
.69
69 [17
[17.5mm]
5 ]
.94
94 [23
[23.9mm]
9 ]
4 19 [106
4.19
[106.4mm]
4 ]
.56[14.2mm]
56[14 2 ]
Model ET3472A is designed for use with extended sockets only.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
12
3/8"
Table 2
Ext'd.Socket Length
(Table 3, Accessories)
Code Length
E
G
J
L
5/8"
1.0"
2.0"
3.0"
S k t
Socket
Number
Hex K
H
Key
Holder
H K
Hex
Key
5/32" (156T)
463-9141
463-9142
463-9144
463-9146
416-9141
016-9793
416-9144
416-9146
093-9007
Example of Complete Tool Model Number:
ET3472A 12 G 156T
Hex Key “T” Type (Table 2)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
17º Offset Tools For
Eddie Bolt™ Applications
H1
R
A
L
H2
Ref.
R
f Atlas
Atl Copco
C
Motor: LTV38N68-13
240 RPM
1.375”
[34.9mm]
Model
Number
No. of
Gears
A
H1
H2
L
R
ET3165A
5
3.19 [81.0mm]
.69 [17.6mm]
.87 [22.2mm]
4.44 [112.8mm]
.68[17.3mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
12
3/8"
Table 2
Ext'd.Socket Length
Code
A
G
J
Extension
Flush
1.0"
2.0"
Table 3
Spline Keys
Code
Size
12SPK 3/8" Dia. Spline Bit
Example of Complete Tool Model Number:
ET3165A 12 G 12SPK
Spline-Lok® Key (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Right Angle Offset Tool For
Eddie Bolt™ Applications
Reverse Drive Socket
2.0”
Ref. Atlas Copco Motor:
LTV38N68-13
H1
R
H2
A
L
Model
Number
No. of
Gears
A
H1
H2
L
R
ET5180C
8
5.44 [138.2mm]
.69 [17.6mm]
.87 [22.2mm]
6.68 [169.7mm]
.68[17.3mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
10
5/16"
12
3/8"
Table 2
Ext'd.Socket Length
Code
E
G
J
Extension
5/8"
1.0"
2.0"
Table 3
Spline Keys
Code
Size
10SPK 5/16" Dia. Spline Bit
12SPK 3/8" Dia. Spline Bit
Example of Complete Tool Model Number:
ET5180C 12 G 12SPK
Spline-Lok® Key (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Right Angle Offset Tool For
Eddie Bolt™ Applications
H1
R
L
A
6.0”
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ET5472G
5
3 00 [76
3.00
[76.2mm]
2 ]
.69
69 [17
[17.5mm]
5 ]
.94
94 [23
[23.9mm]
9 ]
4 19 [106
4.19
[106.4mm]
4 ]
.56[14.2mm]
56[14 2 ]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
10
5/16"
12
3/8"
Table 2
Ext'd.Socket Length
Code
E
G
J
Extension
5/8"
1.0"
2.0"
Table 3
Spline Keys
Code
Size
10SPK 5/16" Dia. Spline Bit
12SPK 3/8" Dia. Spline Bit
Example of Complete Tool Model Number:
ET5472G 12 G 12SPK
Spline-Lok® Key (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Offset Tools For
Eddie Bolt™ Applications
L
H
Model
Number
L
ETL3100B
9.6" [243mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
06
3/16"
08
1/4"
H
Center to Side
Angle Head
Weight
1.5" [36.6mm] 0.53" [13.5mm] 1.9 lbs [0.88 kg]
Table 2
Ext'd.Socket Length
Table 3
Spline Keys
(Table 3, Accessories)
(See Table 5, Accessories)
Code
Size
06SPK 3/16" Di
Dia. S
Spline
li Bit
08SPK 1/4" Dia. Spline Bit
Code
E
G
J
L
Extension
5/8"
5/8
1.0"
2.0"
3.0"
Example of Complete Tool Model Number:
ETL3100B 06 G 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Offset Tools For
Eddie Bolt™ Applications
L
H
Note: Uses LTV28N30-10 Modified Motor
Model Number
ET3100B08(*)08SPK
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
8
1/4"
L
H
13.8" [350mm] 1.5" [36.6mm]
Center to Side
Angle Head
Weight
0.53" [13.5mm]
3.1 lbs [1.4 kg]
Table 2
Extended Sockets & Spline-LokTM Bits
Code
E
G
J
L
Extension
5/8"
1.0"
2.0"
3.0"
Socket P/N
463 9121
463-9121
463-9122
463-9124
463-9126
Spline-Lok Bit
493 9121
493-9121
493-9122
493-9124
493-9126
Example of Complete Tool Model Number:
ET3100B 08 G 08SPK
Spline-Lok® Bit Size (Table 2)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Offset Tools For
Eddie Bolt™ Applications
L
H
Note: Uses LTV28N30-10 Modified Motor
Model Number
L
H
Center to Side
Angle Head
Weight
ET3100B10(*)10SPK 13.8" [350mm] 1.5" [36.6mm] 0.53" [13.5mm] 3.1 lbs [1.4 kg]
Table 1
Eddie Bolt
Fastener Diameter
Dash
10
Dia.
5/16"
Table 2
Extended Sockets & Spline-LokTM Bits
Code
E
G
J
L
Extension
5/8"
1.0"
2.0"
3.0"
Socket P/N
463-9111
463-9112
463-9114
463-9116
Spline-Lok Bit
493-9111
493-9112
493-9114
493-9116
Example of Complete Tool Model Number:
ET3100B 10 G 10SPK
Spline-Lok® Bit (Table 2)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Offset Tools For
Eddie Bolt™ Applications
L
H
Motor: LTV28N30-10 with
4210-2484-86 angle head
Motor: 100-9626
L
ET3100B12( * )SPK
16.8" [427mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Dia.
12
3/8"
(Without Socket)
Center to Side
Angle Head
Weight
1.6" [41mm]
0.79" [20.0mm]
4.4 lbs [2.0 kg]
H
Model Number
Table 2
Ext'd.Sockets and Spline-Lok™ & Hex Key Details
-12 Diameter
Code Extension
G
1.0"
J
2.0"
L
3.0"
Socket P/N
463-9101
463-9104
463-9106
Spline Lok Key Hex Key Holder
Spline-Lok
493-9101
493-9104
493-9106
016-9799
NA
NA
Hex Key
093-9007
093-9007
093-9007
Example of Complete Tool Model Number:
ET3100B 12 G 12SPK
Hex Key Size (Table 2)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Offset Tools For
Eddie Bolt™ Applications
L
H
Note: Uses LTV38N68-13 Modified Motor
Model Number
L
ET3100B14 (*) 187E
16.8" [427 mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
14
Dia.
7/16"
(Without Socket)
Center to Side
Angle Head
Weight
2.75" [69.8mm]
0.79" [20.0mm]
4.8 lbs [2.2 kg]
H
Table 2
Ext'd.Sockets and Hex Key Details
-14 Diameter
Code Extension
G
1.0"
J
2.0"
L
3.0"
Socket P/N
Hex Key Holder
Hex Key
463-9298
463-9300
463-9303
016-9897
016-9898
016-9899
093-9023
Example of Complete Tool Model Number:
ET3100B 14 G 187E
Hex Key Size (Table 2)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
90º Offset Tools For
Eddie Bolt™ Applications
L
H
Note: Uses LTV46N150-L13 Modified Motor
Model Number
L
ET3100B16 (*) 218E
20.3" [515mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
16
Dia.
1/2"
(Without Socket)
Center to Side
Angle Head
Weight
2.04" [52mm]
.984" [25mm]
7.2 lbs [3.3 kg]
H
Table 2
Ext'd.Sockets and Hex Key Details
-16 Diameter
Code Extension
G
1.00"
I
1.75"
1.75
K
2.5"
Socket P/N
Hex Key Holder
Hex Key
TBD
263 9675
263-9675
263-9676
TBD
016 9819
016-9819
016-9820
093-9262
093-9262
093
9262
093-9262
Example of Complete Tool Model Number:
ET3100B 16 K 218E
Hex Key Size (Table 2)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Eddie Bolt™ Applications
Accessories for
Power Installation
Tools
SECTION 2
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
“ERGO KEY” System For Power Tools
Conversion From Hex Key to Spline-Lok®
Kit Part Numbers:
Tool Model
Kit Ordering No.
ETL1108 Series
031-9413
ETL1129 Series
031 9414
031-9414
ETL3109 Series
ETL1110 Series
031-9415
ETL1111 Series
031-9416
ETL3111 Series
ET1020 Series
Kit Includes:
(1) Plate, Retainer Holder
(1) Return Spring
(2) Bearing Pins
All Necessary Screws and Bushings
Note: Kits do not include sockets,
hex keys or Spline-Lok®keys
031-9418
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Extended Sockets For Power Tools
Eddie Bolt™ Applications
ATS
S
Part Number
"B"
A/F
HEX
Delta Rad
Delta-Rad™
Socket Insert
Retaining
Ring
Table 1
Tool Models: ETL1108, ETL1109, ETL1129, ETL1110, ETL1111, ETL3108, ETL3109,
ETL3110, ETL3111
Fastener
Diameter
Socket
Length
Socket
Code
1/2"
1.0"
2.0"
3.0"
1/2"
1.0"
2.0"
2.0
3.0"
1/2"
1.0"
2.0"
3.0"
D
G
J
L
D
G
J
L
D
G
J
L
0.56"
Tool Models: ET1015, ET1020
Fastener Socket
Socket
Diameter Number
Length
Socket
Code
463-9161
463-9162
463-9164
463-9166
E
G
J
L
-5
-6
-8
Socket
Number
463-9001
463-9002
463-9004
463-9006
463-9011
463-9012
463-9014
463
9014
463-9016
463-9021
463-9022
463-9024
463-9026
"A" Dia.
Ref.
B Ref.
Ref
"B"
"C"
C Ref.
Ref
"D" Dia.
Ref.
Retaining
Ring
5/16"
0.48"
0.22"
096-9074
"A" Dia.
Ref.
"B" Ref.
"C" Ref.
"D" Dia.
Ref.
Retaining
Ring
0.77"
7/16"
0.68"
0.31"
096-9468
0.53"
1.06"
0.66"
Table 2
-10
5/8
1.0"
2.0"
3.0"
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Extended Sockets For Power Tools
Eddie Bolt™ Applications
ATS
S
Part Number
"B"
A/F
HEX
Delta Rad
Delta-Rad™
Socket Insert
Retaining
ea
g
Ring
Table 3
Tool Models: ET3472A, ET3492A
Fastener
Diameter
-10
-12
Socket
Number
Socket
Length
Socket
Code
463-9131
463-9132
463-9134
463-9136
463-9141
463 9142
463-9142
463-9144
463-9146
5/8"
1.0"
2.0"
3.0"
5/8"
1 0"
1.0"
2.0"
3.0"
E
G
J
L
E
G
J
L
"A" Dia.
Ref.
"B" Ref.
"C" Ref.
"D" Dia.
Ref.
Retaining
Ring
0.44"
0.70"
0.31"
096-9495
0.77"
0.88"
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Spline-Lok® Keys for
Power Tool Applications
Power Tool Spline-Lok® Keys
Table 5
Models: ETL1108, ETL1109, ETL1129,
ETL1110, ETL1111, ETL3108, ETL3109,
ETL3110, ETL3111, ETL1115, ETL1117
Fastener
Dia.
-5
-6
-8
8
Socket Length
Spline-Lok® Key
Part Number
Flush
1/2"
1.0"
2.0"
3.0"
Flush
1/2"
1.0"
2.0"
3.0"
Flush
1/2"
1 0"
1.0"
2.0"
3.0"
493-9201
493-9001
493-9002
493-9004
493-9006
493-9202
493-9011
493-9012
493-9014
493-9016
493-9203
493-9021
493 9022
493-9022
493-9024
493-9026
Models: ET1015, ET1020
Fastener
Dia.
-10
Socket Length
Spline-Lok® Key
Part Number
Flush
493-9204
5/8"
1.0"
2.0"
3.0"
493-9161
493-9162
493-9164
493-9166
Models: ET3100
-10
5/8"
1.0"
2.0"
3.0"
493-9111
493-9112
493-9114
493-9116
-12
5/8"
1.0"
2 0"
2.0"
3.0"
493-9102
493-9101
493 9104
493-9104
493-9106
Models: ET3472, ET3492
-10
-12
Flush
5/8"
1.0"
2.0"
3.0"
5/8"
1.0"
2.0"
3.0"
493-9204
493-9131
493-9132
493-9134
493-9136
493 9141
493-9141
493-9142
493-9144
493-9146
Revised 4/19/12: added ETL1115 & ETL1117 to Table 5
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Flush Socket Gears for
Power Tool Applications
Flush Socket Gears for Power Tools
Table 4
Power Tool
Fastener Socket Gear
Model Number
Dia.
Part Number
ETL1110
ETL1111
ETL3110
5
-5
461-9008
461
9008
-6
461-9202
-6
461-9009
-8
461-9010
-10
461-9011
ETL3111
ETL1109/1129
ETL3109
ETL1110
ETL1111
ETL3110
ETL3111
ETL1110
ETL1111
ETL3110
ETL3111
ET1015
ET1020
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Eddie Bolt™ Applications
H d IInstallation
Hand
ll i
Tools
SECTION 3
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Ratchet Wrench For
Eddie Bolt™ Applications
Fastener
Dia.
Wrench Part
Number
R
REF.
T
REF.
L
REF.
Delta-Rad™
Inner Dia.
-5
-6
-8
-10
-12
EB2T5000-5
EB2T5000-6
EB2T5000-8
EB2T5000-10
EB2T5000-12
.31
31
.33
.39
.50
.65
.38
38
.38
.38
.38
.50
4 31
4.31
4.31
5.50
5.50
6.81
.2230
2230 /
.2470 /
.3315 /
.4015 /
.4960 /
.2215
2215
.2455
.3300
.4000
.4943
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture
manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
Example of Complete Wrench Model Number:
EB2T5000 - 6
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Hand Ratchet Wrench For
Eddie Bolt™ Applications
Fastener
Dia.
Wrench Part
Number
R
REF.
T
REF.
L
REF.
Delta-Rad™
Inner Dia.
-5
-6
-8
-10
-12
EB2T5200-5
EB2T5200-6
EB2T5200-8
EB2T5200-10
EB2T5200-12
.31
.33
.39
.50
.58
.38
.38
.38
.38
.50
4.31
4.31
5.50
5.50
6.81
.2230
.2470
.3315
.4015
.4960
/
/
/
/
/
.2215
.2455
.3300
.4000
.4943
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture
manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
Example of Complete Wrench Model Number:
EB2T5200 - 6
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Wrench, Curved Handle For
Eddie Bolt™ Applications
EB2T7000-(*)LA
Fastener
Dia.
-5
-6
-8
-10
-12
Wrench Part
Number
EB2T7000-5LA
EB2T7000-6LA
EB2T7000-8LA
EB2T7000-10LA
EB2T7000-12LA
A
Ref.
Length
Ref.
C
Dia
Dia.
Ref.
D
Max.
E
Ref.
Delta-Rad™
Inner Dia.
.26
.26
.31
.32
.36
4.5
4.5
5.5
5.5
7.5
.44
.44
.54
.70
.80
.22
.22
.27
.35
.40
.63
.63
.79
.99
1.17
.2230 /
.2470 /
.3315 /
.4015 /
.4960 /
.2215
.2455
.3300
.4000
.4943
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
Example of Complete Wrench Model Number:
EB2T7000 – 6LA
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Wrench, Pivot Handle For
Eddie Bolt™ Applications
Fastener Straight Wrench
Dia
Dia.
Part Number
-5
-6
-8
-10
-12
EB2T7100-5LA
EB2T7100-6LA
EB2T7100-8LA
EB2T7100-10LA
EB2T7100-12LA
Pivot Wrench
Part Number
A
Ref
Ref.
Length
Ref
Ref.
C
Dia.
Ref.
D
Max.
Max
EB2T7100-5PLA
EB2T7100-6PLA
EB2T7100-8PLA
EB2T7100-10PLA
EB2T7100-12PLA
.23
.23
.26
.32
.36
4.5
4.5
5.5
5.5
7.5
.44
.44
.54
.70
.80
.22
.22
.27
.35
.40
Delta-Rad™
Inner Dia.
Dia
.2230 /
.2470 /
.3315 /
.4015 /
.4960 /
.2215
.2455
.3300
.4000
.4943
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
Example of Complete Wrench Model Number:
EB2T7100 - 6LA
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Wrench, 45° Offset Handle For
Eddie Bolt™ Applications
DELTA-RAD™
INNER DIA.
EB2T7200 - (*)LA
DELTA-RAD
Fastener
Dia.
-5
-6
-8
-10
-12
12
Offset Wrench
Part Number
A
Ref.
C
Dia.
Ref.
EB2T7200-5LA
EB2T7200-6LA
EB2T7200-8LA
EB2T7200-10LA
EB2T7200 12LA
EB2T7200-12LA
.21
.21
.26
.27
.31
31
.44
.44
.54
.70
.80
80
D
Length
Max.
Ref.
.22
.22
.27
.35
.40
40
4.5
4.5
5.5
5.5
75
7.5
E
Ref.
Delta-Rad
Delta-Rad™
Inner Dia.
.80
.80
.84
.88
1 02
1.02
.2230 /
.2470 /
.3315 /
.4015 /
.4960
4960 /
.2215
.2455
.3300
.4000
.4943
4943
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
Example of Complete Wrench Model Number:
EB2T7200 - 6LA
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Wrench, 45° Offset Handle For
Eddie Bolt™ Applications
DELTA-RAD™
INNER DIA.
EB2T7210 - (*)LA
Fastener
Dia.
-5
-6
-8
-10
-12
12
Offset Wrench
Part Number
A
Ref.
C
Dia.
Ref.
EB2T7210-5LA
EB2T7210-6LA
EB2T7210-8LA
EB2T7210-10LA
EB2T7210 12LA
EB2T7210-12LA
.21
.21
.26
.27
.31
31
.44
.44
.54
.70
.80
80
D
Length
Max.
Ref.
.22
.22
.27
.35
.40
40
4.5
4.5
5.5
5.5
75
7.5
E
Ref.
Delta-Rad
Delta-Rad™
Inner Dia.
.80
.80
.84
.88
1 02
1.02
.2230 /
.2470 /
.3315 /
.4015 /
.4960
4960 /
.2215
.2455
.3300
.4000
.4943
4943
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
Example of Complete Wrench Model Number:
EB2T7210 - 6LA
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Double Ended, 45° Offset Handle For
Eddie Bolt™ Applications
Fastener
F
t
Dia.
-5
-6
-8
-10
-12
Offsett Wrench
Off
W
h
Part Number
A
Dia.
Ref.
B
Max.
C
Ref.
D Ref.
Length
L
th
Ref.
EB2T7230-5LA
EB2T7230-6LA
EB2T7230-8LA
EB2T7230-10LA
EB2T7230-12LA
.44
.44
.54
.70
.80
.22
.22
.27
.35
.40
.21
.21
.26
.27
.31
.80
.80
.84
.88
1.02
5.5
5.5
6.9
6.9
8.7
Delta-Rad™
D
lt R d™
Inner Dia.
.2230 /
.2470 /
.3315 /
.4015 /
.4960 /
.2215
.2455
.3300
.4000
.4943
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
Example
p of Complete
p
Wrench Model Number:
EB2T7230 - 6LA
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Crow Foot, Hand Wrench For
Eddie Bolt™ Applications
Fastener
Dia.
-5
-6
-8
-10
-12
Offset Wrench
Part Number
A
Ref.
Length
Ref.
EB2T7300-5LA
EB2T7300-6LA
EB2T7300-8LA
EB2T7300-10LA
EB2T7300-12LA
.23
.23
.26
.27
.31
1.54
1.71
2.11
2.58
3.19
C
Dia
Dia.
Ref.
.44
.44
.54
.70
.80
D
Max.
.22
.22
.27
.35
.40
Delta-Rad™
Inner Dia.
.2230 /
.2470 /
.3315 /
.4015 /
.4960 /
.2215
.2455
.3300
.4000
.4943
Square
Drive
Size Ref.
1/4
1/4
1/4
3/8
3/8
1. Identified with Wrench Part Number, Alcoa Fastening Systems and date
of manufacture. (Location Optional)
2. Inspect Delta-Rad™ Driver using EB2G2000 Gauge.
3. White paint marking requirement removed
Example of Complete Wrench Model Number:
EB2T7300 - 6LA
Fastener Diameter Size
Tool Model Number
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
i t
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Roller Wrenches For
Eddie Bolt™ Applications
RWB100-130
RWEB-80-6
RWB100-400
RWEB-40-5
or
RWEB40-6
INTEGRATED
SOCKETS
SQ. DRIVE
WRENCHES
Fastener Roller Wrench Part
A
Dia.
Number
Ref.
Handle
Length
Ref.
C
D
Delta-Rad™
Dia.
Max.
Inner Dia.
Ref.
Integrated Sockets, Roller Wrenches
-5
-6
-6
RWEB40-5
RWEB40-6
RWEB80-6
1.1
1.1
1.6
6.0
6.0
6.0
.57
.57
.57
.28
.28
.28
.2230 / .2215
.2470 / .2455
.2470 / .2455
.28
.28
.44
.74
Square Drive
1/4"
1/4"
5/16"
3/8"
Square Drive Roller Wrenches (see note 2 below )
-5
-5, -6
-8
-10, -12
RWB100-40
RWB100-80
RWB100-130-312
RWB100-400
1.3
1.8
2.0
2.0
6.0
6.0
7.4
8.0
.57
.57
.87
1.5
Rev.
G
1. Identified with Wrench Part Number, Alcoa Fastening
g Systems
y
and date
of manufacture. (Location Optional)
2. Use EB2T4020 series sockets with RWB100 series roller wrenches
3. Inspect Delta-Rad™ Driver using EB2G2000 Gauge
Note:
The nature of the installation of the Eddie-Bolt 2™ System results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in resistance.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Sockets For
Eddie Bolt™ Applications
SQUARE
DRIVE
L
SET SCREW
(SUPPLIED WITH SOCKET)
DELTA-RAD™ DRIVE SOCKET
Nut
Dia
Socket Part
Number
"A"
Dia.
Ref.
-5
-5
-5
-6
6
-6
-6
-8
-8
-8
-8
-10
-10
-10
-12
-12
-12
EB2T4020-5
EB2T4020-5-1
EB2T4020-5-3
EB2T4020 6
EB2T4020-6
EB2T4020-6-1
EB2T4020-6-3
EB2T4020-8-2
EB2T4020-8-2-1
EB2T4020-8-2-2
EB2T4020-8-2-3
EB2T4020-10
EB2T4020-10-1
EB2T4020-10-3
EB2T4020-12
EB2T4020-12-1
EB2T4020-12-3
0.53
0.53
0.53
0 56
0.56
0.56
0.56
0.72
0.72
0.72
0.72
0.77
0.77
0.77
0.89
0.89
0.89
DELTA-RAD™
Inner Dia.
.2230 /
.2230 /
.2230 /
.2470
2470 /
.2470 /
.2470 /
.3315 /
.3315 /
.3315 /
.3315 /
.4015 /
.4015 /
.4015 /
.4960 /
.4960 /
.4960 /
.2215
.2215
.2215
.2455
2455
.2455
.2455
.3300
.3300
.3300
.3300
.4000
.4000
.4000
.4943
.4943
.4943
"L"
Ref.
Ext'd
Length
0.74
1.74
3.74
0 74
0.74
1.74
3.74
0.79
1.79
2.79
3.79
1.03
2.03
4.03
1.24
2.24
4.24
Standard
1.0"
3.0"
St d d
Standard
1.0"
3.0"
Standard
1.0"
2.0"
3.0"
Standard
1.0"
3.0"
Standard
Material:
Insert: Carbide
Body: Alloy Steel,
Steel Heat Treated
Finish:
Insert: None
Body: Black Oxide
1.0"
3.0"
Square
Drive
Ref.
REV.
A
DIA
1/4"
1/4"
1/4"
1/4"
1/4
1/4"
1/4"
5/16"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
Note:
The nature of the installation of the Eddie-Bolt 2™ system results in a large drop in installation torque wrench forces as the
installation is completed. Care should be exercised to avoid injury during manual installations as a result of this drop in
resistance.
R i d 5/13/11
Revised:
5/13/11, added
dd d more socket
k t llengths
th
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Spline-Lok® Key Wrenches For
Eddie Bolt™ Applications
Ref.
Spline-Lok® Key
Ordered Separately
Spline-Lok® Keys
Fastener
Di
Diameter
t
-5
-6
-8
-10
-12
Handle
SPKH-5
SPKH-6
SPKH-8
SPKH-10
SPKH-12
Spline-Lok® Keys
.825
82 Long
2 " Long
2.5"
5.0"
0" Long
093-9197
093-9199
093-9201
093-9203
093-9205
093-9198
093-9200
093-9202
093-9204
093-9206
093-9371
093-9372
093-9373
093-9374
093-9375
How to Order:
1. Order Handle Assembly Separately: SPKH-(*)
2. Order Spline-Lok® Keys Separately
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Spline-Lok® Key Wrenches For
Eddie Bolt™ Applications
5.6”
Ref.
Spline-Lok® Key
Ordered Separately
S li L k® Keys
Spline-Lok®
K
Fastener
Di
Diameter
t
Handle
-5
-6
-8
-10
-12
SPKH-5S
SPKH-6S
SPKH-8S
SPKH-10S
SPKH-12S
Spline-Lok® Keys
.825
82 Long
2 " Long
2.5"
5.0"
0" Long
093-9197
093-9199
093-9201
093-9203
093-9205
093-9198
093-9200
093-9202
093-9204
093-9206
093-9371
093-9372
093-9373
093-9374
093-9375
How to Order:
1. Order Handle Assembly Separately: SPKH-(*)S
2. Order Spline-Lok® Keys Separately
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hex Key Wrenches For
Eddie Bolt™ Applications
-10 & -12 Dia.
-5, -6 & -8 Diameters
Solid 1-piece Hex Keys
Ordered Separately
Hex Key
Holder
Hex Keys
Nut Dia.
-5
-6
-8
Nut Dia.
-10
-12
-14
Handle
SPKH-6
SPKH-6
SPKH-8
Set Screw
Hex Keys Choices
Hex Key
Size
.825 Long
2.5" Long
.078 (5/64")
.078 ((5/64"))
.093 (3/32")
093-9322
093-9322
093-9324
093-9323
093-9323
093-9325
Hex Key Holders
Hex Key
Size
.825 Long
2.5" Long
SPKH-10 .125 (1/8")
SPKH-12 .156 (5/32")
SPKH-14 .187
187 (3/16")
(3/16 )
016-9867
016-9869
016-9xxx
016-9868
016-9870
016-9xxx
Handle
Hex Key
(Replaceable)
Hex Key
Set
Screw
093-9008
093-9032
093-9096
065-9031
065-9031
065-9031
How to Order:
1. Order Handle Assembly Separately: SPKH-(*)
2. Order Hex Key Holder, Hex Keys & Set Screws Separately
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Spline-Lok® & Hex Key Wrenches
For Eddie Bolt™ Applications
SPK650-(*)-2
SPK650-(*)-1
“A”
Ref.
Spline-Lok® Keys
Hex Keys
Caution: Keys are to be used with hand installation tools only
Hex Keys
Spline-Lok® Keys
Part Number
Dia.
"A" Ref.
Description
SPK650-5-1
SPK650-5-2
SPK650-5-4
SPK650-6-1
SPK650-6-2
SPK650-6-4
SPK650-8-1
SPK650-8-2
SPK650-8-3
SPK650-8-4
SPK650-10-1
SPK650-10-2
SPK650-12-1
-5
-5
-5
-6
-6
-6
-8
-8
-8
-8
0.80
1.04
1.75
0.80
1.07
1.75
0.98
1.23
0.56
1.75
-10
-10
-12
1.25
1.00
1.25
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline Bit
Spline
p
Bit
Hex Key Part Screw
Number
Dia.
HK650-078-1
HK650-078-2
HK650-078-3
650 09
HK650-094-1
HK650-094-2
HK650-094-3
HK650-125-4
HK650-125-3
HK650-156-3
HK650-156-4
-5, -6
-5, -6
-5, -6
-8
8
-8
-8
-10
-10
-12
-12
Hex Size
5/64" (.078)
5/64" (.078)
5/64" (.078)
3/32" ((.094)
3/3
09 )
3/32" (.094)
3/32" (.094)
1/8" (.125)
1/8" (.125)
5/32" (.156)
5/32" (.156)
"A"
Ref.
(inches)
0.50
0.75
2.09
0.50
0
50
0.75
2.09
1.25
2.40
2.40
1.25
"B"
Ref.
(inches)
3.20
3.20
4.45
3.50
3
50
3.25
4.45
5.25
4.10
4.10
5.25
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Limited Access Spline-Lok® Keys
For Eddie Bolt™ Applications
(B)
(C)
(A)
(D)
(E)
(F)
SPLINE-LOK®
DASH
NUMBER
Example of Part Number: SPK651 – ( * )
Spline-Lok® Bit Size
Basic Part Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Eddie Bolt™ Applications
Removall
R
Tools
SECTION 4
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pneumatic Removal Tool For
Eddie Bolt™ Applications
H1
R
A
L
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETLR1149
4
1.96 [49.8mm]
.47 [11.9mm]
.61 [15.4mm]
2.81 [71.4mm]
.35 [8.8mm]
This removal socket runs in a counter-clockwise direction to remove Eddie Bolt fasteners. Tool is also
equipped with a Spline-Lok® key to keep the pin from turning during the nut removal process.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 2
Ext'd.Socket Length
Code Extension
D
1/2"
G
1.0"
J
2.0"
Table 3
Spline Keys
Table 4
Drive Shaft Extended Length
Code
Size
05SPK 5/32" Dia.
Di Spline
S li Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Code
A
C
Length Index Unit
With
2.0"
With
Example of Complete Tool Model Number:
ETLR1149 C 06 G 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Alcoa Fastening
Systems®
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pneumatic Removal Tool For
Eddie Bolt™ Applications
H1
R
L
A
H2
Model
Number
No. of
Gears
A
H1
H2
L
R
ETLR1129
5
2.68 [68.1mm]
.47 [11.9mm]
.61 [15.4mm]
3.53 [89.7mm]
.35 [8.8mm]
This removal socket runs in a counter-clockwise direction to remove Eddie Bolt fasteners. Tool is also
equipped with a Spline-Lok® key to keep the pin from turning during the nut removal process.
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 2
Ext'd.Socket Length
Code Extension
D
1/2"
G
1.0"
J
2.0"
Table 3
Spline Keys
Table 4
Drive Shaft Extended Length
Code
Size
05SPK 5/32" Dia.
Di Spline
S li Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Code
A
C
Length Index Unit
With
2.0"
With
Example of Complete Tool Model Number:
ETLR1129 C 06 G 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Alcoa Fastening
Systems®
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Power Removal Tool
Eddie Bolt™ Applications
Basic Tool Model Number: ETR1000B
Available for: -5, -6, -8 diameter fasteners
Not intended for new procurement
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 2
g
Ext'd.Socket Length
Table 3
p
Keys
y
Spline
(Table 1, Accessories)
(See Table 5, Accessories)
Code
Size
05SPK 5/32" Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Code
G
J
L
Extension
1.0"
2.0"
3.0"
E ample of Complete Tool Model Number:
Example
N mber
ETR1000B 08 G 08SPK
Spline-Lok® Key Dia.
1” Socket Length
Fastener Diameter Size
Tool Model Number
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Offset Pneumatic Removal Tool for
Eddie Bolt™ Applications
H1
R
L
A
Not intended for new procurement
H2
Model
Number
ETR1111
No. of
Gears
A
H1
H2
L
R
5
2.75 [69.9mm]
.67 [17.02mm]
.75 [18.92mm]
3.68 [93.3mm]
.43 [10.8mm]
Table 1
Eddie Bolt
Fastener Diameter
Dash
Diameter
05
5/32"
06
3/16"
08
1/4"
Table 2
Ext'd.Socket Length
Code
G
Extension
1.86"
Table 3
Spline Keys
Table 4
Drive Shaft Extended Length
Code
Size
05SPK 5/32" Dia. Spline Bit
06SPK 3/16" Dia. Spline Bit
08SPK 1/4" Dia. Spline Bit
Code
A
B
C
D
G
H
Length
2.0"
2.0"
6.0"
6.0"
Index Unit
With
Without
With
Without
With
Without
Example of Complete Tool Model Number:
ETR1111 C 06 G 06SPK
Spline-Lok® Bit Size (Table 3)
Extended Socket Length (Table 2)
Fastener Diameter (Table 1)
Ext’d. Drive Shaft (Table 4)
Tool Model Number
Alcoa Fastening
Systems®
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Removal Tool For
Eddie Bolt™ Applications
7.0” [177mm]
0.86”
[21.8mm]
EBRTS9000-(*)
Removal Socket
Handle for Spline-Lok® Key
Spline-Lok® Key
Roller Wrench Removal Tools for Eddie Bolt™ Fasteners
Fastener
F
t
Roller Wrench
Dia.
-5
-6
EBRT9001
EBRT9001
Removal Socket
Spline-Lok®
S
li L k®
Key
Handle for
Spline-Lok® Key
EBRTS9000-5
EBRTS9000-6
093-9198
093-9200
SPKH-5S
SPKH-6S
Note: EBRT9001 reverse roller wrench has a 3/8” square drive
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Removal Tool For
Eddie Bolt™ Applications
7.75” [197mm]
Alcoa Fastening Systems
1.25”
[[31.7mm]]
EBRTS9000-(*)
Removal Socket
Handle for Spline-Lok® Key
Spline-Lok® Key
Roller Wrench Removal Tools for Eddie Bolt™ Fasteners
Fastener
Roller Wrench
Dia.
-8
-10
-12
EBRT9000
EBRT9000
EBRT9000
Removal Socket
Spline-Lok®
Handle for
Spline-Lok® Key
EBRTS9000-8
EBRTS9000-10
EBRTS9000-12
093-9202
093-9204
093-9206
SPKH-8S
SPKH-10S
SPKH-12S
Note: EBRT9000 reverse roller wrench has a 3/8” square drive
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Spline-Lok® Wrenches For
Eddie Bolt™ Applications
Spline-Lok® Key
Ordered Separately
Fastener
Di
Diameter
t
-5
-6
-8
-10
-12
Handle
Assembly
y
20° Offset
SPKH-5
SPKH-6
SPKH-8
SPKH-10
SPKH-12
Handle
Assembly
y
Straight
SPKH-5S
SPKH-6S
SPKH-8S
SPKH-10S
SPKH-12S
Spline-Lok® Keys
.825
825 L
Long
2 5" L
2.5"
Long
093-9197
093-9199
093-9201
093-9203
093-9205
093-9198
093-9200
093-9202
093-9204
093-9206
How to Order:
1. Order Handle Assembly Separately: SPKH-(*)
2. Order Spline-Lok® Keys Separately
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Removal Tool
Eddie Bolt™ Applications
USE AN OPEN END WRENCH HOLDING THE
TOOL BODY, A COUNTER-CLOCKWISE
ROTATION TIGHTENS THE GRIP OF THE
COLLET ON THE NUT. CONTINUED
ROTATION WILL UNTHREAD THE NUT.
STANDARD OPEN END WRENCH
NOTES:
• THE COLLET GRIPS THE LOBED ENDS OF THE EDDIE-BOLT® NUTS TO REMOVE THEM FROM THE EDDIE-BOLT® PINS.
Removal Tool
Part Number
Tool Body
"H"
"L"
"D"
"K"
Hex
Dia. Hex Lengt
(A/F)
h
(A/F)
Handle /
Ejector
Assembly
Handle
Only
Spline
Bit Only
Collet
(Order
Number)
EB2T8300-05SPK
.56
7/16
1.17
7/16 RWB203-05SPK 098-9121 093-9207 100714-007
EB2T8300-06SPK
.56
7/16
1.17
7/16 RWB203-06SPK 098-9122 093-9208 100714-008
EB2T8300-08SPK
.75
9/16
1.58
1/2
EB2T8300-10SPK
.95
11/16
2.00
9/16 RWB203-10SPK 098-9124 093-9210 100714-005E
EB2T8300-12SPK
1.17
13/16
2.47
3/4
RWB203-08SPK 098-9123 093-9209 100714-009
RWB203-12SPK 098-9125 093-9211 100714-006E
Note: -12 Diameter is currentlyy only
y available in a hex key
y configuration,
g
, see EB2T8300-12N
Rev: 11/30/2011
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Removal Tool
Eddie Bolt™ Applications
Hex Bit
STANDARD OPEN END WRENCH
USE AN OPEN END WRENCH TO HOLD THE TOOL BODY, A COUNTER-CLOCKWISE
ROTATION TIGHTENS THE GRIP OF THE COLLET ON THE NUT. CONTINUED
ROTATION WILL UNTHREAD THE NUT.
NOTES:
• THE COLLET GRIPS THE LOBED ENDS OF THE EDDIE-BOLT® NUTS TO REMOVE THEM FROM
THE EDDIE-BOLT® PINS.
Will not work with Spline-Lok® keys, hex keys only
Tool Body
Nut
Remov al Tool
Di
Dia.
P t Number
Part
N b
"H"
"D"
"K"
"L"
Hex
Dia.
Hex (A /F)
Length
(A/F)
-12 EB2T8300-12N
1.17
13/16
2.47
3/4
-14 EB2T8300-14N
TBD
TBD
-16 EB2T8300-16N
TBD
TBD
Handle / Ejector
Handle
Hex Bit
A
Assembly
bl
O l
Only
O l
Only
RWB203-15E
098-9132 093-9345
TBD
TBD RWB203-18E
098-9133 093-9346
TBD
TBD RWB203-21E
098-9134 093-9347
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Removal Tool
Eddie Bolt™ Applications
Pivot Pin
B
A
S
R
Tool Head
Grip Jaws
Extender
T
Structure
Eddie Nut
Pin
View Shows Tool Gripping
Nut at Lobed End
NOTES:
• THIS CROW FOOT TYPE RATCHET REMOVAL TOOL IS USED WITH AN EXTENDER OF
VARYING LENGTH (PROVIDED BY USER) ALLOWS REMOVAL OF EDDIE-BOLT
EDDIE BOLT® NUT LOCATED
IN DEEP CHANNELS OR IN VERY RESTRICTED AREAS.
• THE TOOL GRIPS THE LOBED ENDS OF THE EDDIE-BOLT® NUTS TO REMOVE THEM FROM
THE EDDIE-BOLT® PINS.
Fastener
Diameter
Removal Tool
Part Number
T
R
A
B
S
-5
-6
-8
-10
-12
EBRT100-5CF
EBRT100-6CF
EBRT100-8CF
EBRT100-10CF
EBRT100-12CF
.28
.28
.28
.37
.47
.28
.28
.28
.35
.43
.36
.36
.51
.56
.81
.66
.66
.76
1.01
1.16
.25
.25
.25
.37
.37
.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Removal Tool
Eddie Bolt™ Applications
L
PIVOT PIN
Alcoa Fastening
Systems - ATS
EBRT100-(*)
Lot No:
W
THROUGH
HOLE
R
RAD
13°
T
TOOL HANDLE
EDDIE NUT
VIEW SHOWS TOOL GRIPPING
NUT AT LOBED END
Note:
• Ratchet type removal tool securely grips Eddie-Bolt® Nuts at the
lobed ends for their easy removal.
• EBRT100-(*)S indicates a straight handle
Fastener
Diameter
-5
-6
-8
-10
-12
Tool Model
Number
EBRT100-5
EBRT100-6
EBRT100-8
EBRT100-10
EBRT100-12
T
R
L
W
.28
.28
.28
.38
.47
.28
.28
.28
.35
.43
5.60
5.60
5.60
5.80
6.90
.42
.42
.55
.55
.67
Dwg Rev: (-8 dia) “W” dimension changed from .42 to .55 on 4-22-10
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Hand Removal Tool
Eddie Bolt™ Applications
L
Pivot Pin
Alcoa Fastening
Systems
EBRTO100- (*)
Lot No:
W
Through Hole
Grip Jaws
R
RAD
13°
T
Tool Handle
Eddie Nut
Note:
Eddie-Bolt
Bolt® Nuts at the
• Ratchet Type Removal Tool Securely Grips Eddie
lobed ends for their easy removal.
Fastener
Diameter
-5
5
-6
-8
-10
-12
Tool Model
Number
EBRTO100-5
EBRTO100
5
EBRTO100-6
EBRTO100-8
EBRTO100-10
EBRTO100-12
T
R
L
W
.28
28
.28
.28
.38
.47
.28
28
.28
.28
.35
.43
5.60
5
60
5.60
5.60
5.80
6.90
.42
42
.42
.42
.55
.67
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Eddie Bolt™ Applications
Inspection
Gauges
SECTION 5
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Paddle Gauges for Inspection of
Nut Swage
F
RAD
REF.
30 O
TYP.
IDENTIFICATION
C
REF.
4.0 REF.
A
DIA
THRU
.125
REF.
R .250
Offset Handle Gauge
EB2G1200 - (*)
1.000
STRAIGHT
HANDLE
GAUGE
OFFSET
HANDLE
GAUGE
EB2G1100-5
EB2G1200-5
EB2G1100-6
EB2G1200-6
EB2G1100-8
EB2G1200-8
EB2G1100-10 EB2G1200-10
EB2G1100-12 EB2G1200-12
A
DIA.
.2295
.2280
.2535
.2520
.3400
3400
.3385
.4115
.4100
.5075
.5060
H
C
REF
F
RADIUS
H
REF
.250
.250
.125
.250
.250
.125
.375
.312
.125
.375
.375
.125
.500
.375
.125
Note: This gauge is used to inspect an installed Eddie Nut™ to make
certain it is fully swaged. It is to be used as a “Go / No Go” gauge.
If the gauge fits over the installed fastener it is a “Go” and if the
gauge does not fit over the fastener it is considered a “No Go”.
Revised: 08/15/2011
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Nut
Gauge
Dash
Number
Nut Gauge Part
Number
"A"
DIA
REF
-5
EB2G1000-5
.375
-6
EB2G1000-6
.375
-8
EB2G1000-8
.500
-10
EB2G1000-10
.625
-12
12
EB2G1000 12
EB2G1000-12
.750
750
"B"
DIA.
.2295
.2280
2280
.2535
.2520
.3400
.3385
.4115
.4100
.5075
.5060
C
DIM
MIN
REV.
Cylindrical Type, Nut Inspection Gauge
Eddie Bolt™ Applications
.150
M
.150
M
.250
M
.250
M
.275
275
M
Material:
Stainless Steel, Heat Treated
Finish:
None
Example of
Part Number: EB2G1000 - 5
Designates Gauge Dia. Size
Basic Part Number
Revised: 01/15/2012
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Master Pin Gauge
Eddie Bolt™ Applications
Note:
Part Number: EB2G2010
The Master Pin Gauge is for checking wear on the Paddle and
Cylindrical Nut Inspection Gauges
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Driver / Socket Inspection Gauge
Eddie Bolt™ Applications
Driver
Driver Inspection
Inspection
Part Number
Diameter
-5
-6
-8
8
-10
-12
Material:
Finish:
EB2G2000-5
EB2G2000-6
EB2G2000 8
EB2G2000-8
EB2G2000-10
EB2G2000-12
"A" DIA
Gauge
+.0002
-.0002
"B"
DIA
REF
"L"
REF
.2235
.2475
.3330
3330
.4035
.4985
.375
.375
.500
500
.625
.750
1.250
1.250
1 375
1.375
1.562
1.625
Stainless Steel,, Heat Treated
None
Example of
Part Number: EB2G2000
-5
Designates Gauge Dia. Size
Basic Part Number
Refer to next page for Inspection Procedure
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Driver / Socket Inspection Gauge
Eddie Bolt™ Applications
Part Number: EB2G2000- ( * )
INSPECTION PROCEDURE:
1. INSERT GAUGE FULLY INTO DRIVER BETWEEN THE DRIVING RADII PER FIGURE 1,
THEN ROTATE THE GAUGE.
2. WHILE CONTINUING TO ATTEMPT TO RATATE, MOVE THE GAUGE OUT TOWARD
THE DRIVER COUNTERBORE PER FIGURE 2.
ACCEPT: GAUGE DOES NOT ROTATE OVER THE DRIVING RADII MORE THAN 90° IN
ANY AREA OF INPECTION ZONE.
REJECT: GAUGE DOES ROTATE OVER THE DRIVING RADII MORE THAN 90° IN ANY
AREA OF INSPECTION ZONE.
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Grip Gauge for Selection of Proper
Pin Grip Length - “EB2G1400”
Alcoa Fastening
g
Systems-ATS
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Pin Protrusion Gauge
Eddie Bolt™ Applications
Alcoa Fastening
Systems - ATS
EB2G1309
EB2G1309
GAUGE SET
PART NUMBER
GAUGE SIZE
DASH NUMBER
EB2G1309
-5
-6
-8
-10
-12
PIN
NOMINAL
DIA.
5/32
3/16
1/4
5/16
3/8
MAX
MIN
PROTRUSION PROTRUSION
.358
.378
.423
.518
.558
.275
.295
.340
.435
.475
This item is sold as a gauge set only. EB2G1309
EXAMPLE OF
PART NUMBER:
EB2G1309 - (*)
5/32" THRU 3/8" DIA. PINS
PROTRUSION GAUGE SET
1.
INDIVIDUAL GAUGES ARE ASSEMBLED ON A CHAIN AS SHOWN
2.
This gage is for standard and 1/64” oversize pin diameters
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Pin Protrusion Gauge
Eddie Bolt™ Applications
Alcoa Fastening
Systems - ATS
EB2G1309Y
1/32 OVERSIZE
EB2G1309Y
OVERSIZE PROTRUSION GAUGE SET
GAUGE SET
PART
NUMBER
GAUGE
SIZE DASH
NUMBER
PIN
NOMINAL
DIA
DIA.
MAX.
PROTRUSION
MIN.
PROTRUSION
EB2G1309Y
-6Y
-8Y
-10Y
-12Y
3/16
1/4
5/16
3/8
.397
.457
.562
.602
.315
.375
.480
.520
This item is sold as a gauge set only. EB2G1309Y
EXAMPLE OF
PART NUMBER:
EB2G1309Y - (*)
3/16" THRU 3/8" DIA. PINS
OVERSIZE PROTRUSION GAUGE SET
1.
INDIVIDUAL GAUGES ARE ASSEMBLED ON A CHAIN AS SHOWN
2.
This gage is for 1/32” (double oversize) pin diameters
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Pin Protrusion Gauge
Eddie Bolt™ Applications
Alcoa Fastening
Systems - ATS
EB2G1315-6
EB2G1315
7
1 2
14
16
Use with Standard and 1/64” Oversize
BACB31H & BACB31K Eddie Bolts
GAUGE SET
PART NUMBER
GAUGE SIZE
DASH NUMBER
EB2G1315
-6
-8
-10
-12
-14
-16
PIN
NOMINAL
DIA.
3/16
1/4
5/16
3/8
7/16
1/2
MAX
MIN
PROTRUSION PROTRUSION
.398
.468
.573
.618
.708
.783
.315
.385
.490
.535
.625
.700
EXAMPLE OF
PART NUMBER:
EB2G1315
3/16" THRU 1/2" DIA. PINS
PROTRUSION GAUGE SET
1.
2.
INDIVIDUAL GAUGES ARE ASSEMBLED ON A CHAIN AS SHOWN
THIS GAUGE IS FOR STANDARD AND 1/64” OVERSIZE PIN DIAMETERS
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Pin Protrusion Gauge
Eddie Bolt™ Applications
Alcoa Fastening
Systems - ATS
EB2G1315Y
1/32” OVERSIZE
EB2G1315Y
7
1 2
14
16
Use with BACB31H & BACB31K 1/32” Oversize Pin Diameter Bolts
GAUGE SET
PART NUMBER
GAUGE SIZE
DASH NUMBER
EB2G1315Y
-6Y
-8Y
-10Y
-12Y
-14Y
-16Y
PIN
NOMINAL
DIA.
3/16
1/4
5/16
3/8
7/16
1/2
MAX
MIN
PROTRUSION PROTRUSION
.418
.503
.618
.663
.734
.833
.335
.420
.535
.580
.651
.750
EXAMPLE OF
PART NUMBER:
EB2G1315Y
3/16" THRU 1/2" DIA. PINS
PROTRUSION GAUGE SET
1.
2.
INDIVIDUAL GAUGES ARE ASSEMBLED ON A CHAIN AS SHOWN
THIS GAUGE IS FOR 1/32” (DOUBLE OVERSIZE) PIN DIAMETERS
Assembly Tool Systems Division
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
Assembly Tool Systems
Alcoa Fastening Systems
801 S. Placentia Avenue
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX
New Tool Application Form
H
R
B
R
A
1. “R” Dimension Minimum __________ inches.
2. “B” Minimum Clearance over Pin __________ inches.
3. Diameter of the EN nut ( -5, -6, -8, -10, -12, -14 ) (circle one)
5. “A” Maximum and Minimum Offset Dimensions. Max __________ Min __________
6. “H” Maximum Height Dimension, Including Socket Max __________ inches.
7. Is an extended socket required? Yes _____, No _____, Length of socket _______
Type 1, Pistol Grip
(-5, -6, -8) Diameter Nuts
Type 3, 17° Offset
(All Diameters)
Type 2, 90° Rt Angle Offset
(All Diameters)
Type 4,
Hand Tools
8. Determine type of tool: Type 1 ____, Type 2 ____, Type 3 ____, Type 4 _____
9. Tool model number preferred: ____________________________ (See Eddie Bolt Tool Catalog)
Company Name: ________________________________________________
Contact: _______________________________________________________
Assembly Tool Systems Division
Phone: _________________________ FAX: 801
_________________________
S. Placentia Avenue
Return by FAX: (714) 871-4821
Fullerton, CA USA 92831
714-278-8908 Telephone
714-871-4821 FAX