Microstick II Information Sheet

Microstick II Information Sheet
The Microstick II is designed to provide an easy to use, economical development
environment for 16-bit and 32-bit microcontrollers. The board includes an integrated
debugger/programmer, a socket for the device under test and pins that facilitate
insertion into a prototyping board for extremely flexible development. Microstick II is
designed to support any 16- or 32-bit Microchip 28-pin SPDIP packaged MCU that
matches the power and debugger/programmer interface pins shown on the enclosed
schematic.
Installing MPLAB® IDE and C Compilers
Americas
Asia/Pacific (Continued)
Atlanta - 678-957-9614
Boston - 774-760-0087
Chicago - 630-285-0071
Cleveland - 216-447-0464
Dallas - 972-818-7423
Detroit - 248-538-2250
Indianapolis - 317-773-8323
Los Angeles - 949-462-9523
Phoenix - 480-792-7200
Santa Clara - 408-961-6444
Toronto - 905-673-0699
China - Chongqing - 86-23-8980-9588
China - Hangzhou - 86-571-2819-3187
China - Hong Kong SAR - 852-2401-1200
China - Nanjing- 86-25-8473-2460
China - Qingdao - 86-532-8502-7355
China - Shanghai - 86-21-5407-5533
China - Shenyang - 86-24-2334-2829
China - Shenzhen - 86-755-8203-2660
China - Wuhan - 86-27-5980-5300
China - Xiamen - 86-592-2388138
China - Xian - 86-29-8833-7252
China - Zhuhai - 86-756-3210040
India - Bangalore - 91-80-3090-4444
India - New Delhi - 91-11-4160-8631
India - Pune - 91-20-2566-1512
Japan - Yokohama - 81-45-471-6166
Korea - Daegu - 82-53-744-4301
Korea - Seoul - 82-2-554-7200
Malaysia - Kuala Lumpur - 60-3-6201-9857
Malaysia - Penang - 60-4-227-8870
Philippines - Manila - 63-2-634-9065
Singapore - 65-6334-8870
Taiwan - Hsin Chu - 886-3-6578-300
Taiwan - Kaohsiung - 886-7-213-7830
Taiwan - Taipei - 886-2-2500-6610
Thailand - Bangkok - 66-2-694-1351
Europe
Austria - Wels - 43-7242-2244-39
Denmark - Copenhagen - 45-4450-2828
France - Paris - 33-1-69-53-63-20
Germany - Munich - 49-89-627-144-0
Italy - Milan - 39-0331-742611
Netherlands - Drunen - 31-416-690399
Spain - Madrid - 34-91-708-08-90
UK - Wokingham - 44-118-921-5869
Asia/Pacific
Australia - Sydney - 61-2-9868-6733
China - Beijing - 86-10-8569-2100
China - Chengdu - 86-28-8665-5511
08/02/11
Microchip Technology Inc. • 2355 West Chandler Blvd. • Chandler, AZ 85224-6199
www.microchip.com
The Microchip name and logo, the Microchip logo, and MPLAB are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective
companies. © 2010-2011, Microchip Technology Incorporated, Printed in the U.S.A. All Rights Reserved. 08/11
DS51951B
*DS51951B*
MPLAB® Integrated Development Environment (IDE) should be installed prior to
using the Microstick. This board is designed to run MPLAB IDE version 8.76 or
later. While MPLAB IDE provides assembler tools for development, most of the
code examples provided for Microchip devices are written in the C language and
require a C compiler to be installed. Microchip’s MPLAB C compiler seamlessly integrates into MPLAB IDE. Both the MPLAB IDE and C compiler are free (see the note
below) and are available for download at http://www.microchip.com/MPLAB and
http://www.microchip.com/compilers, respectively.
Note:
Standard Evaluation (Free) – All optimization levels are enabled for 60
days, but then revert to optimization level 1 only.
Code Examples and More Information
For code examples and more information, please visit the Microstick II product page at:
http://www.microchip.com/microstick.
Running and Debugging Applications
After downloading the code examples and installing the development tools, please use
the following procedure to build, run and debug your software:
1. If using MPLAB 8.xx IDE, do the following; otherwise, skip to step 2:
a) Select Programmer > Select Tool, and then choose Starter Kit on Board.
b) Build the project by selecting Project > Build All.
c) Download your code to the DSC or MCU by selecting Programmer > Program.
2. If using MPLAB X IDE, do the following:
a) Select Run > Set Project Configuration > Customize.
b) Under Hardware Tools, select Starter Kits (PKOB), and then click Apply
followed by OK.
c) Select Run > Run Project to download the code to the target device, and then
click the Reset Release icon.
For more information on building, running and debugging your application, refer to the
MPLAB help.
Microstick II Information Sheet
Schematics
VDD
VDD
MCLR
VDD
S2
2
1
R39
10k
TP1
J6
C20
C18
0.1uF
0.1uF
GND
PIN21_RXD
P1
1
2
PIN2
LED Jumper
RED
D6
PIN3
PGEDA
PGECA
R41
PIN6
470R
PIN7
26
25
5
24
6
23
9
10
PIN11
PIN12
PGEDB
PIN22_TXD
27
4
8
PIN10
U5
3
7
PIN9
28
Device Socket
J3
PIN26
PIN25
PIN24
PIN23
22
PIN22_TXD
21
PIN21_RXD
20
VCAP
19
11
18
12
17
13
16
14
15
C19
10uF
PIN18
PIN17
PIN16
VDD
PGECB
Breadboard Headers
PGED_MASTER
VDD
C17
USB_DPGEC_MASTER
0.1uF
USB_D+
MCLR
S1
1
PGEC_MASTER
3
PGECA
PGECB
2
PGED_MASTER
4
PGEDA
PGEDB
DS51951B