PIC32 USB Starter Kit II
User’s Guide
© 2010-2014 Microchip Technology Inc.
DS60001158C
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,
PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash
and UNI/O are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MTP, SEEVAL and The Embedded Control Solutions
Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
Analog-for-the-Digital Age, Application Maestro, BodyCom,
chipKIT, chipKIT logo, CodeGuard, dsPICDEM,
dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB
Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O,
Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA
and Z-Scale are trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
GestIC and ULPP are registered trademarks of Microchip
Technology Germany II GmbH & Co. KG, a subsidiary of
Microchip Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2010-2014, Microchip Technology Incorporated, Printed in
the U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-62077-977-4
QUALITY MANAGEMENT SYSTEM
CERTIFIED BY DNV
== ISO/TS 16949 ==
DS60001158C-page 2
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
© 2010-2014 Microchip Technology Inc.
PIC32 USB STARTER KIT II
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 5
Chapter 1. Introduction
1.1 Kit Contents .................................................................................................. 11
1.2 PIC32 Functionality and Features ................................................................ 12
Chapter 2. Hardware
2.1 Hardware Features ....................................................................................... 15
Appendix A. Board Layout and Schematics
A.1 PIC32 USB Starter Kit II Development Board Block Diagram ..................... 17
A.2 PIC32 USB Starter Kit II Board Layout ........................................................ 18
A.3 PIC32 USB Starter Kit II Board Schematics ................................................ 20
Appendix B. Bill of Materials
Index ............................................................................................................................. 29
Worldwide Sales and Service .................................................................................... 30
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 3
PIC32 USB Starter Kit II User’s Guide
NOTES:
DS60001158C-page 4
© 2010-2014 Microchip Technology Inc.
PIC32 USB STARTER KIT II
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB® X IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
starter kit. Items discussed in this chapter include:
•
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
Recommended Reading
The Microchip Web Site
Development Systems Customer Change Notification Service
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes how to use the PIC32 (General Purpose) Starter Kit, PIC32
USB Starter Kit II, and the PIC32 Ethernet Starter Kit (all also referred to as “starter kit”)
as a development tool to emulate and debug firmware on a target board. This user’s
guide is composed of the following chapters:
• Chapter 1. “Introduction” provides a brief overview of the starter kit, highlighting
its features and uses.
• Chapter 2. “Hardware” provides the hardware descriptions of the starter kit.
• Appendix A. “Board Layout and Schematics” provides a block diagram, board
layouts, and detailed schematics of the starter kit.
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 5
PIC32 USB Starter Kit II User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description
Italic characters
Initial caps
Examples
Referenced books
MPLAB IDE User’s Guide
Emphasized text
...is the only compiler...
A window
the Output window
A dialog
the Settings dialog
A menu selection
select Enable Programmer
Quotes
A field name in a window or
dialog
“Save project before build”
Underlined, italic text with
right angle bracket
A menu path
File > Save
Bold characters
A dialog button
Click OK
A tab
Click the Power tab
Text in angle brackets < >
A key on the keyboard
Press <Enter>, <F1>
Plain Courier New
Sample source code
#define START
Filenames
autoexec.bat
File paths
c:\mcc18\h
Keywords
_asm, _endasm, static
Command-line options
-Opa+, -Opa-
Bit values
0, 1
Constants
0xFF, ‘A’
Italic Courier New
A variable argument
file.o, where file can be any
valid filename
Square brackets [ ]
Optional arguments
mcc18 [options] file
[options]
Curly brackets and pipe
character: { | }
Choice of mutually exclusive
arguments; an OR selection
errorlevel {0|1}
Ellipses...
Replaces repeated text
var_name [, var_name...]
Represents code supplied by
user
void main (void)
{ ...
}
Notes
DS60001158C-page 6
Represents
A Note presents information
that we want to re-emphasize,
either to help you avoid a
common pitfall or to make you
aware of operating differences
between some device family
members. A Note can be in a
box, or when used in a table
or figure, it is located at the
bottom of the table or figure.
Note:
This is a standard
note box.
CAUTION
This is a caution note.
Note 1: This is a note used in a
table.
© 2010-2014 Microchip Technology Inc.
RECOMMENDED READING
This user’s guide describes how to use the starter kit. The following Microchip
documents are available and recommended as supplemental reference resources.
PIC32MX5XX/6XX/7XX Family Data Sheet (DS60001156)
Refer to this document for detailed information on PIC32 devices. Reference
information found in this data sheet includes:
•
•
•
•
Device memory maps
Device pinout and packaging details
Device electrical specifications
List of peripherals included on the devices
MPLAB® XC32 C/C++ Compiler User’s Guide (DS50001686)
This document details the use of Microchip’s MPLAB XC32 C/C++ Compiler to develop
an application.
MPLAB® X IDE User’s Guide (DS50002027)
Refer to this document for more information pertaining to the installation and
implementation of the MPLAB X IDE software, as well as the MPLAB SIM Simulator
software that is included with it.
Universal Serial Bus Specification and Associated Documents
The Universal Serial Bus is defined by the USB 2.0 specification and its associated
supplements and class-specific documents. These documents are available from the
USB Implementers Forum. See their web site at: http://www.usb.org.
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at: http://www.microchip.com. This
web site makes files and information easily available to customers. Accessible by most
Internet browsers, the web site contains the following information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listings
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listings of seminars and events; and listings of Microchip sales
offices, distributors and factory representatives
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 7
PIC32 USB Starter Kit II User’s Guide
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchip’s customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool of
interest.
To register, access the Microchip web site at www.microchip.com, click on Customer
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
• Compilers – The latest information on Microchip C compilers and other language
tools
• Emulators – The latest information on the Microchip in-circuit emulator, MPLAB
REAL ICE™
• In-Circuit Debuggers – The latest information on the Microchip in-circuit
debugger, MPLAB ICD 3
• MPLAB X IDE – The latest information on Microchip MPLAB X IDE, the
Windows® Integrated Development Environment for development systems tools
• Programmers – The latest information on Microchip programmers including the
PICkit™ 3 development programmer
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at: http://support.microchip.com.
DS60001158C-page 8
© 2010-2014 Microchip Technology Inc.
DOCUMENT REVISION HISTORY
Revision A (January 2010)
This is the initial release of the PIC32 USB Starter Kit II User’s Guide.
Revision B (December 2010)
This revision includes the following updates:
• All references to the PIC32 Starter Kit and PIC32 Ethernet Starter Kit have been
removed. User information on these two starter kits can be found in their
respective user’s guides, which are available from the Microchip web site.
• Formatting changes and minor text updates have been incorporated throughout
the document
Revision C (March 2014)
This revision includes the following updates:
• Updated the device name and removed the USBOEN pin from the PIC32MX CPU
schematic (see Figure A-4)
• Updated the device name in the Debug CPU schematic (see Figure A-5)
• Removed the USBOEN pin from the Application Board Connector schematic (see
Figure A-6)
• Updated the Bill of Materials to include ordering information for components Y3,
C15, and C16, which were originally labeled as “Do Not Populate” (DNP) (see
Appendix B. “Bill of Materials”)
• Additional formatting changes and minor text updates have been incorporated
throughout the document
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 9
PIC32 USB Starter Kit II User’s Guide
NOTES:
DS60001158C-page 10
© 2010-2014 Microchip Technology Inc.
PIC32 USB STARTER KIT II
USER’S GUIDE
Chapter 1. Introduction
Thank you for purchasing the Microchip Technology PIC32 USB Starter Kit II. This
board provides a low-cost, modular development system for Microchip’s line of 32-bit
microcontrollers (MCUs).
The starter kit is preloaded with demonstration software for the user to explore the new
features of the PIC32. It is also expandable through a modular expansion interface,
which allows the user to extend its functionality. The starter kit also supplies on-board
circuitry for full debug and programming capabilities.
This chapter covers the following topics:
• Kit Contents
• PIC32 Functionality and Features
The preprogrammed example code on the PIC32 MCU is available via download from
the Microchip web site at http://www.microchip.com. All project files have been included
so that the code may be used directly to restore the PIC32 MCU on the starter kit to its
original state (i.e., if the sample device has been reprogrammed with another program).
1.1
KIT CONTENTS
The PIC32 USB Starter Kit II contains the following items:
• PIC32 USB Starter Kit II Development Board
• USB mini-B to full-sized A cable – USB debug cable to debug and power the
board
• USB micro-B to full-sized A cable – PIC32 USB cable to communicate with the
PIC32 USB port
Note:
If you are missing any part of a kit, contact a Microchip sales office for assistance. A list of Microchip offices for sales and service is provided on the
back page of this document.
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 11
PIC32 USB Starter Kit II User’s Guide
1.2
PIC32 FUNCTIONALITY AND FEATURES
Representations of the layout of the PIC32 USB Starter Kit II are shown in Figure 1-1
and Figure 1-2.
The top assembly of the board includes these key features, as indicated in Figure 1-1:
1.
2.
3.
4.
5.
6.
7.
8.
9.
PIC32MX795F512L 32-bit microcontroller.
Green power indicator LED.
On-board crystal for precision microcontroller clocking (8 MHz).
USB connectivity for on-board debugger communications.
Orange debug indicator LED.
Three push button switches for user-defined inputs.
Three user-defined indicator LEDs.
USB Type A receptacle connectivity for PIC32 host-based applications.
HOST mode power jumper.
Note:
When running USB device applications, open the jumper JP2 to prevent
possibly back-feeding voltage onto the VBUS from one port on the host to
another (or from one host to another).
FIGURE 1-1:
PIC32 USB STARTER KIT II LAYOUT (TOP VIEW)
4
5
7
6
2
7
1
9
6
7
6
8
3
DS60001158C-page 12
© 2010-2014 Microchip Technology Inc.
Introduction
The bottom assembly of the board includes these key features, as indicated in
Figure 1-2:
1. PIC32MX440F512H USB microcontroller for on-board debugging.
2. Regulated +3.3V power supply for powering the starter kit via USB or expansion
board.
3. Connector for various expansion boards.
4. USB Host and OTG power supply for powering PIC32 USB applications.
5. USB Type Micro-AB receptacle for OTG and USB device connectivity for PIC32
OTG/device-based applications.
FIGURE 1-2:
PIC32 USB STARTER KIT II LAYOUT (BOTTOM VIEW)
1
2
3
5
4
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 13
PIC32 USB Starter Kit II User’s Guide
NOTES:
DS60001158C-page 14
© 2010-2014 Microchip Technology Inc.
PIC32 USB STARTER KIT II
USER’S GUIDE
Chapter 2. Hardware
This chapter describes the hardware features of the PIC32 USB Starter Kit II.
2.1
HARDWARE FEATURES
The key features of the PIC32 USB Starter Kit II are listed below. They are presented
in the order given in Section 1.2 “PIC32 Functionality and Features”. You can refer
to Figure 1-1 for their locations on the board.
2.1.1
Processor Support
The PIC32 USB Starter Kit II is designed with a permanently mounted (i.e., soldered)
PIC32MX795F512L processor.
2.1.2
Power Supply
There are two ways to supply power to the PIC32 USB Starter Kit II:
• USB bus power connected to USB debug connector J1.
• An external application board with a regulated DC power supply that provides +5V
can be connected to the J2 application board connector that is provided on the
bottom side of the board.
One green LED (D3) is provided to show that the PIC32 microcontroller is powered up.
2.1.3
Debug USB Connectivity
The PIC32 USB Starter Kit II includes a PIC32MX440F512H USB microcontroller that
provides debugger connectivity over USB. The PIC32MX440F512H is hard wired to the
PIC32 device to provide two types of protocol translation:
• I/O pins of PIC32MX440F512H to the ICSP™ pins of the PIC32
• I/O pins of PIC32MX440F512H to the JTAG pins of the PIC32
The PIC32 USB Starter Kit II currently uses the JTAG pins of the PIC32 device for
programming and debugging.
2.1.4
PIC32 USB Connectivity
There are three possible ways to connect to the PIC32 USB microcontroller:
• HOST Mode – Connect the device to the Type A connector J4, located on the top
of the starter kit. If using the Debug USB port to power the Host port, install jumper
JP2 to short the back-power prevention diode. Note that a maximum of ~400 mA
can be supplied from the Debug USB port to the Host port using this method.
If the full 500 mA supply is needed, an external supply must be connected to the
application board and jumper JP2 must be removed to prevent back-powering the
Debug USB port.
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 15
PIC32 USB Starter Kit II User’s Guide
• DEVICE Mode – Connect the debug Mini-B USB cable to port J1 and then connect the starter kit to the host using a cable with a Type-B Micro plug to the starter
kit’s Micro A/B port J5, located on the bottom of the starter kit. The other end of
the cable must have a Type-A plug. Connect it to a USB host. Jumper JP2 should
be removed.
• OTG Mode – Connect the starter kit to the OTG device using an OTG Micro A/B
cable to the Micro A/B port J5, located on the bottom side of the starter kit. The
starter kit provides an on-board power supply capable of providing 120 mA Max.
This supply is controlled by the PIC32MX795F512L microcontroller. Jumper JP2
should be removed.
2.1.5
Switches
Push button switches provide the following functionality:
• SW1: Active-low switch connected to RD6
• SW2: Active-low switch connected to RD7
• SW3: Active-low switch connected to RD13
The switches do not have any debounce circuitry and require the use of internal pull-up
resistors; this allows you to investigate software debounce techniques. When Idle, the
switches are pulled high (+3.3V). When pressed, they are grounded.
2.1.6
LEDs
The RD0 through RD2 LEDs are connected to PORTD of the processor. The PORTD
pins are set high to light the LEDs.
2.1.7
Oscillator Options
The installed microcontroller has an oscillator circuit connected to it. The main oscillator
uses an 8 MHz crystal (Y2) and functions as the controller’s primary oscillator. Use of
an external crystal is required to develop USB applications. The USB specification
dictates a frequency tolerance of ±0.25% for full speed. Non-USB applications can use
the internal oscillators. The starter kit also has provisions for an external secondary
oscillator (Y3); however, this is not populated.
The PIC32MX440F512H is independently clocked and has its own 8 MHz crystal (Y1).
2.1.8
120-Pin Modular Expansion Connector
The PIC32 USB Starter Kit II has been designed with a 120-pin modular expansion
interface, which allows the board to provide basic generic functionality now, and easy
extendability to new technologies as they become available.
TABLE 2-1:
STARTER KIT CONNECTOR PART NUMBERS
Connector
DS60001158C-page 16
HIROSE Electric PN
Starter Kit Connector
FX10A-120P/12-SV1(71)
Application Board Connector
FX10A-120S/12-SV(71)
© 2010-2014 Microchip Technology Inc.
PIC32 USB STARTER KIT II
USER’S GUIDE
Appendix A. Board Layout and Schematics
A.1
PIC32 USB STARTER KIT II DEVELOPMENT BOARD BLOCK DIAGRAM
FIGURE A-1:
HIGH-LEVEL BLOCK DIAGRAM OF THE PIC32 USB STARTER KIT II BOARD
Power Circuit
+3.3V
+3.3V
Power
Supply
(1)
VUSB or
+5V_EXT
USB OTG
Device/OTG
(Type micro-A/B)
USB Host
Host
(Type A)
Debug USB
Debugger Circuit
ICSP™
JTAG
+5V EXT
(PIC32MX440F512H)
PIC32MX795F512L
Application Board Connector
VUSB or
+5V_EXT
Switches
LEDs
Note 1:
From Debugger USB Port.
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 17
PIC32 USB Starter Kit II User’s Guide
A.2
PIC32 USB STARTER KIT II BOARD LAYOUT
FIGURE A-2:
DS60001158C-page 18
PIC32 USB STARTER KIT II LAYOUT (TOP ASSEMBLY)
© 2010-2014 Microchip Technology Inc.
FIGURE A-3:
PIC32 USB STARTER KIT II LAYOUT (BOTTOM ASSEMBLY)
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 19
PIC32 USB Starter Kit II User’s Guide
A.3
PIC32 USB STARTER KIT II BOARD SCHEMATICS
PIC32 USB STARTER KIT II SCHEMATICS (PIC32MX CPU)
U2
PIC32MX795F512L
FIGURE A-4:
DS60001158C-page 20
© 2010-2014 Microchip Technology Inc.
© 2010-2014 Microchip Technology Inc.
FIGURE A-5:
PIC32 USB STARTER KIT II SCHEMATICS (DEBUG CPU)
U1
PIC32MX440F512H
DS60001158C-page 21
PIC32 USB Starter Kit II User’s Guide
FIGURE A-6:
DS60001158C-page 22
PIC32 USB STARTER KIT II SCHEMATICS
(APPLICATION BOARD CONNECTOR)
© 2010-2014 Microchip Technology Inc.
FIGURE A-7:
PIC32 USB STARTER KIT II SCHEMATICS (POWER SUPPLY)
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 23
PIC32 USB Starter Kit II User’s Guide
PIC32 USB STARTER KIT II SCHEMATICS (USB OTG/DEVICE POWER SUPPLY)
DS60001158C-page 24
FIGURE A-8:
© 2010-2014 Microchip Technology Inc.
© 2010-2014 Microchip Technology Inc.
FIGURE A-9:
PIC32 USB STARTER KIT II SCHEMATICS (USB HOST POWER SUPPLY)
DS60001158C-page 25
PIC32 USB Starter Kit II User’s Guide
FIGURE A-10:
DS60001158C-page 26
PIC32 USB STARTER KIT II SCHEMATICS (SWITCHES AND LEDS)
© 2010-2014 Microchip Technology Inc.
PIC32 USB STARTER KIT II
USER’S GUIDE
Appendix B. Bill of Materials
TABLE B-1:
Reference
PIC32 USB STARTER KIT II BILL OF MATERIALS
Description
Manufacturer
Part No.
U4
IC SMT, MCP1253,DC/DC Converter 3.3V 8L
MSOP
Microchip
MCP1253-33X50I/MS
U1
IC SMT, PIC32MX440F512H-80I/MR 64P QFN
Microchip
PIC32MX440F512H-80I/MR
U2
IC SMT, PIC32MX795F512L 100L TQFP
Microchip
PIC32MX795F512L-80I/PT
U5
IC SMT, TC1262-3.3VDB, SOT-223
Microchip
TC1262-3.3VDBTR
C1, C9, C10, CAP SMT, 0.1 µF 0603 CER 16V 10% X7R
C11, C13,
C30,
C19-C24
Panasonic
ECJ-1VB1C104K
C17
CAP SMT, 1.0 µF 0805 CER 16V 10% X7R
Kemet
C0805C105K4RACTU
C2, C29
CAP SMT, 10 µF 0805 CER 6.3V 20% , X5R
Murata
GRM21BF50J106ZE01L
C7, C8
CAP SMT, 4.7 µF 0805 CER 16V +80-20% Y5V
Panasonic
ECJ-2FB0J475K
C3-C6
CAP SMT, 20 pF 0603 CER 50V, 5% C0G
Rohm
MCH185A200JK
C25
CAP SMT, 6.8uF 0805 CER 6.3V 10% X5R
Kemet
C0805C685K9PACTU
C26
CAP SMT, 100 µF 1812 CER 6.3V -20%,+80%
Y5V
Panasonic
ECJ-5YF0J107Z
JP2
CONN, HDR, 1x2 Breakaway, 0.100" Pitch, 0.025
SQ Post (0.100"/0.230")
Molex
90120-0762
CONN, Shunt, 2-Pin Shorting Shunt (.100" Spacing)
Sullins
SSC02SYAN
J1
CONN SMT, RECPT, USB Mini-B 5POS RA
Delphi
15430262-110
J2
CONN, SMT, HDR, 120P, W/Post
Hirose Electronics FX10A-120P/12-SV1(71)
J4
CONN, RECPT, USB TYPE-A w/Board Lock
FCI
J5
CONN, RECPT, USB Micro-B R/A
Hirose Electronics ZX62-AB-5PA
D2, D7
DIODE SMT, Schottky 30V 0.5A SOD-123
Diodes Inc.
U6
IC SMT, TPS20X1 0.75A Power Dist Switch
5-SOT23
Texas Instruments TPS2051BDBVR
U7
IC SMT, TPS2041 1A PWR Dist Switch SNGL
SOT23-5
Texas Instruments TPS2041BDBVR
87520-0010BLF
B0530W-7-F
D4
LED SMT, 0805 Red DIFF 2x1.25 mm Thin
Lumex
SML-LXT0805IW-TR
D1, D5
LED SMT, 0805 Yellow DIFF 2x1.25 mm Thin
Lumex
SML-LXT0805YW-TR
D3, D6
LED SMT, 0805 Green DIFF 2x1.25 mm
Lumex
SML-LXT0805GW-TR
Y1, Y2
OSC SMT, 8.0 MHz Crystal 20PF
Fox Electronics
FQ7050B-8
R9, R11,
R12, R15
RES SMT, 1.0 KΩ 1/10W 5% 0603
Panasonic
ERJ-3GEYJ102V
R10, R13,
R14, R16,
R18
RES SMT, 4.7 KΩ 1/10W 5% 0603
Panasonic
ERJ-3GEYJ472V
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 27
PIC32 USB Starter Kit II User’s Guide
TABLE B-1:
PIC32 USB STARTER KIT II BILL OF MATERIALS (CONTINUED)
Reference
Description
Manufacturer
Part No.
R5, R19,
R20, R22,
R23
RES SMT, 330Ω 1/10W 5% 0603
Panasonic
ERJ-3GEYJ331V
R17
RES SMT, 100 KΩ 1/10W 1% 0603
Panasonic
ERJ-3EKF1003V
S1-S3
Switch, Light Touch 160 gF
Panasonic
EVQ-PPBA25
Y3
CRYSTAL 32 kHz 11 pF THRU
Epson
C-2 32.0000K-P:PBFREE
C15, C16
CAP CER 11 pF 50V 5% NP0 0603
TDK
C18, GND1,
J3, R24,
R27, TP9,
TP10
Spare Location, Do Not Populate
DS60001158C-page 28
C1608C0G1H110J
—
—
© 2010-2014 Microchip Technology Inc.
PIC32 USB STARTER KIT II
USER’S GUIDE
Index
C
S
Customer Change Notification Service ...................... 8
Customer Support ...................................................... 8
Starter Kit Board
Block Diagram................................................... 17
Starter Kit Layout
Bottom Assembly ........................................ 13, 19
Top Assembly ............................................. 12, 18
Starter Kit Schematics
Sheet 1 of 3................................................. 20, 22
Sheet 2 of 3................................................. 21, 23
Sheet 3 of 3............................................24, 25, 26
D
Documentation
Conventions ........................................................ 6
H
Hardware Features
LEDs ............................................................15, 16
Oscillator Options ............................................. 16
PICtail Plus Card Edge Connectors.................. 16
Power Supply.................................................... 15
Processor Support ............................................ 15
Switches ........................................................... 16
USB Connectivity .............................................. 15
U
USB
Connectivity ...................................................... 15
W
WWW Address........................................................... 7
I
Internet Address......................................................... 7
M
Microchip Internet Web Site ....................................... 7
MPLAB IDE Simulator, Editor User’s Guide............... 7
P
PIC32
Layout
32-bit microcontroller ................................. 12
Connector for expansion boards ............... 12
Debug indicator LED ................................. 12
Expansion board connector ....................... 13
HOST mode power jumper ........................ 12
On-board crystal ........................................ 12
Power supply ............................................. 13
Power-indicator LED.................................. 12
Switches .................................................... 12
USB connectivity ....................................... 12
USB Host and OTG power supply ............. 13
USB microcontroller................................... 13
USB Type A receptacle ............................. 12
USB Type Micro-AB receptacle ................. 13
User-defined LEDs .................................... 12
© 2010-2014 Microchip Technology Inc.
DS60001158C-page 29
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
Austin, TX
Tel: 512-257-3370
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-673-0699
Fax: 905-673-6509
DS60001158C-page 30
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
China - Hangzhou
Tel: 86-571-2819-3187
Fax: 86-571-2819-3189
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Germany - Pforzheim
Tel: 49-7231-424750
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Italy - Venice
Tel: 39-049-7625286
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Poland - Warsaw
Tel: 48-22-3325737
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
10/28/13
© 2010-2014 Microchip Technology Inc.