DM1 www.vishay.com Vishay Semiconductors Cut Leads: H = 11.75 mm, W = 6 mm, X = 9.05 mm AVAILABLE FOR: • TSOP34... • TSOP4.... • TSOP32... • TSOP2.... 1 • TSSP4.... 2 16657 “H” “X” 3 “W” 20258 NAME LENS AXIS (X) VIEW TYPE HEIGHT (H) WIDTH (W) DEPTH (D) DM1 9.05 - Cut 11.75 6 - MECHANICAL DIMENSIONS in millimeters 6.95 5.3 3.9 0.85 max. (3.5) 1 1 (5.55) 8.25 11.75 ± 0.5 6 0.6 ± 0.1 0.7 max. 0.89 0.5 max. 2.54 nom. 1.3 2.54 nom. 4.1 5.6 Marking area Not indicated tolerances ± 0.2 Drawing-No.: 6.550-5169.06-4 Issue: 1; 24.02.16 Rev. 1.0, 26-Feb-16 R2.5 1 technical drawings according to DIN specifications Document Number: 82413 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DM1 www.vishay.com Vishay Semiconductors PACKAGING DIMENSIONS in millimeters Drawing-No.: 9.700-5185.0-4 Rev. 13; Date: 20.11.03 20273-1 ORDERING INFORMATION T S P O = optoelectronics for IR receiver applications or S = sensor applications or M = for repeater / learning applications d d d 2 or 3 digit product series d d D 2 digit frequency M 1 Holder type Note • d = “digit”, please consult the list of available series on the previous page to create a valid part number. Example: TSOP32336DM1 PACKAGING QUANTITIY • 90 pieces per bag • 24 tubes per carton Rev. 1.0, 26-Feb-16 2 Document Number: 82413 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000