Photoelectric sensors OZDK 10 (Laser line beam) Diffuse sensors with intensity difference sample drawing 12 16,3 Pot LED 15 * 11,4 6,7 2,9 M8 x 1 2,9 27 3 3,2 7 10,4 * emitter axis general data sample picture type intensity difference version line beam light source pulsed red laser diode sensing distance Tw 3 ... 150 mm optimum operating distance 35 ... 45 mm repeat accuracy < 0,2 mm at laser focus power on indication LED green light indicator LED yellow sensitivity adjustment potentiometer, 5 turn laser class 1 distance to focus 40 mm wave length 650 nm electrical data laser warning response time / release time < 0,05 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 50 mA current consumption typ. 40 mA voltage drop Vd < 1,8 VDC output function light / dark operate output current < 100 mA short circuit protection yes reverse polarity protection yes CLASS 1 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 mechanical data width / diameter 10,4 mm height / length 27 mm depth 16,3 mm type rectangular housing material plastic (ASA) front (optics) PMMA ambient conditions operating temperature 1 -10 ... +50 °C www.baumer.com 17/6/2015 Photoelectric sensors OZDK 10 (Laser line beam) Diffuse sensors with intensity difference order reference connection types output circuit protection class OZDK 10N5150 cable 4 pin, 2 m NPN IP 65 OZDK 10N5150/S35A connector M8 4 pin NPN IP 67 OZDK 10P5150 cable 4 pin, 2 m PNP IP 65 OZDK 10P5150/S35A connector M8 4 pin PNP IP 67 2 www.baumer.com 17/6/2015