1812DPS

Document 248-1
1812DPS Coupled Inductors
• Coupled inductor optimized for xDSL filtering applications
• Can be used as a common mode choke, 1:1 transformer or
in SEPIC applications
Core material Ferrite
Terminations RoHS compliant gold over nickel over moly-manganese.
Weight 0.30 – 0.36 g
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +125°C (ambient + temp rise)
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 600/7″reel; 2200/13″ reel Plastic tape: 12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 3.9 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part
L DCRSRF
max min Isat4 Irms5
(MHz) (mA) (mA)
±20%2Q
1812DPS-102ML_ 1.0
1812DPS-222ML_ 2.2
1812DPS-472ML_ 4.7
1812DPS-103ML_10
1812DPS-153ML_15
1812DPS-223ML_22
1812DPS-393ML_39
1812DPS-473ML_47
38
29
43
35
37
38
39
40
0.20
0.33
0.41
0.74
0.96
1.84
2.60
2.66
285 24002100
175 15001200
102 15001000
74
800 780
65
700 710
54
500 530
5.7 450 420
4.8 400 390
1. When ordering, please specify packaging code:
1812DPS-473MLC
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic
tape (600 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic
tape (2200 parts per full reel).
2. Per winding. Tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. Q measured at 1 MHz.
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Current that causes a 40°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maximum ratings.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
B
E
4
min3(Ohms)
number1(µH)
C
D
1
1
4
2
3
A F
H
G
0.015
0,38
1
0.020
0,51
2
0.048
1,22
4
0.057
1,45
0.115
2,92
Pad Detail
0.020
0,51
3
0.018
0,46
Recommended
Land Pattern
0.015 ref
0,38
0.040 min
1,02
0.030 ±0.002
0,76 ±0,05
A
B
C
D E
F
G
max max max
ref
ref
ref
min
H
0.231 0.196 0.150 0.107 0.100 0.178 0.04 0.03inches
5,87 4,98 3,81 2,72 2,54 4,52 1,02 0,76mm
Document 248-1 Revised 10/12/15
Document 248-2
1812DPS Coupled Inductors
Typical L vs Frequency
Typical Q vs Frequency
Document 248-2 Revised 10/12/15