B0233, B07x9

Document 394 -1
VDSL Transformers
For Ikanos
SmartLeap
This product is not RoHS-compliant. Contact Coilcraft
for current status or possible alternatives.
These surface mount transformers are designed specifically for use with the Ikanos SmartLeap chipset series for
high-speed telecom applications.
They are available in 6-pin and 8-pin versions for both ANSI
and ETSI standards. They all feature 60 dB minimum longitudinal balance, −75 dB maximum harmonic distortion
and 1500 V winding-to-winding isolation.
Coilcraft can also custom engineer transformers to meet
your specific requirements. For free evaluation samples,
contact Coilcraft or visit www.coilcraft.com.
Leakage
Turns Stray
Capacitance3 capacitance4
Part
Number Inductance1 DCR max (Ohms)inductance2ratio
number Standard of pins ±10% (µH)
pri sec
max (µH) line : chip max (pF)
max (pF)
B0233-A
C0971-A
B0709-B
B0749-B
ANSI
ANSI
ETSI
ETSI
6
8
6
8
200
200
200
200
1.00
0.913
0.913
0.913
0.184
0.154
0.113 0.113
1.00
0.70
0.70
0.70
1. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc.
2. Leakage inductance tested across the primary with the secondary shorted.
3. Capacitance tested between windings with 0.1 Vrms applied at 80 KHz.
4. Stray capacitance tested across the primary with 0.1 Vrms applied at 2.5 MHz.
5. Operating temperature range −40°C to +85°C.
6. Electrical specifications at 25°C
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
3 : 1
3 : 1
7 : 2
7 : 2
10.0
25.0
25.0
25.0
25.0
25.0
15.0
15.0
Schematics
B0233-A, B0709-B
6
1
Line
side
4
Chip
side
3
C0971-A, B0749-B
2
Line
side
3
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
7
Chip
side
6
Document 394-1 Revised 04/25/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 394-2
VDSL Transformers for Ikanos SmartLeap
B0749-B, C0971-A
0.360
max
9,14
0.400
max
10,16
0.098
2,49
0.118
3,0
0.350
max
8,89
0.415
max
10,54
0.291
7,4
0.063
1,60
0.031
0,80
B0223-A
5
8
1
0.550
max
13,97
0.028
0,71
XXXXY
XXXXY
0.394
max
10,00
B0749-A
4
B0233-A, B0709-B
0.244
6,2
0.004 / 0.10
0.067
1,70
0.071
1,80
0.283
7,20
0.11
2,80
0.236
6,00
Pinouts
0.004 / 0.10
B0233-A
1
6
3
4
B0709-B
Recommended
Land Pattern
Recommended
Land Pattern
Packaging 300 per 13″ reel Plastic tape: 32 mm wide,
0.42 mm thick, 32 mm pocket spacing, 10.7 mm pocket depth
4
1
6
0.071
1,80
0.118
3,0
0.098
2,49
3
Dimensions are in
inches
mm
Packaging 450 per 13″ reel Plastic tape: 24 mm wide,
0.45 mm thick, 16 mm pocket spacing, 9.0 mm pocket depth
Core material Ferrite
Terminations Non-RoHS tin-lead over nickel over phos bronze.
Weight 1.8 – 2.0 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 394-2 Revised 04/25/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.