FL

Document 293 -1
CCFL Transformers
The FL Series of transformers is designed for use in
cold cathode fluorescent lamp (CCFL) power supplies at
operating frequencies up to 100 kHz. With output power
from 3.5 to 6.0 Watts, these transformers are ideal for
LCD backlight applications. They are available in two
different gull wing, surface mount packages and one inboard configuration for height restricted designs.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
Turns ratioOutput
Vrms3 Vinst max4 DCR max (Ohms)
Part Inductance2 Imax
number1 Schematic Package pri : sec pri : fb (Watts) nom (µH) sec (mA) pri sec
pri sec
pri sec
fb
FL2015-1L_B 1 1 : 671 : 0.19
6.0
43
5.0 22 1600 25.0 20000.2202850.10
FL2015-2L_A 1 1 : 671 : 0.19
6.0
43
5.0 23 1600 29.0 20000.2202850.10
FL2015-3L_A 1 1 : 1001 : 0.25
6.0
19
5.0 16 1600 20.0 20000.1902850.10
FL2015-4L_A 1 1 : 501 : 0.14
6.0
44
7.0 32 1600 40.0 20000.2201650.10
FL2015-5L_A 1 1 : 1251 : 0.38
6.0
20
7.0 12 1600 16.0 20000.1603300.10
FL2015-6L_B 1 1 : 671 : 0.19
6.0
48
11.0 23 1600 29.0 20000.1601760.10
FL2015-7L_A 1 1 : 671 : 0.19
6.0
50
11.0 23 1600 29.0 20000.1601760.10
FL2015-8L_A 1 1 : 861 : 0.21
6.0
31
11.0 18 1600 23.0 20000.1321760.10
FL2015-9L_A 1 1 : 1001 : 0.25
6.0
22
11.0 16 1600 20.0 20000.1321760.10
FL2015-10L_A
1 1 : 931 : 0.25
4.5
40
11.0 17 1600 21.0 20000.1756750.05
FL3209-1L, FL3209-3L Not recommended for new designs. Order FL3209-5L, which is electrically equivalent.
FL3209-2L, FL3209-4L Not recommended for new designs. Order FL3209-6L, which is electrically equivalent.
FL3209-5L_C 5 1 : 100 —
3.5
48
5.0 16 1600 20.0 2000 0.350 362 —
FL3209-6L_D 5 1 : 931 : 0.17
3.5
40
5.0 17 1600 21.0 20000.4008000.08
FL2810-1L_C 4 1 : 100 —
4.5
35
7.0 15 1500 16.5 1650 0.220 500 —
1. When ordering, please specify a packaging code:
Isolation (tested for one minute)
FL2810-1LD
Packaging:D=13″ machine ready reel. EIA-481 embossed plastic
tape.
Package 1: 400 parts per full reel.
Package 4: 750 parts per full reel.
Package 5: 1000 parts per full reel.
B
=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance is measured across both halves of the primary.
3. Vrms = continuous voltage.
4. Vinst = instantaneous voltage at startup.
5. Ambient temperature range: −40°C to +85°C.
Storage temperature range: Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C
6. Electrical specifications at 25°C.
Part
Primary to
number
secondary
FL2015
1500 Vrms
FL3209 500 Vrms
FL2810
1500 Vrms
Primary to
feedback
500 Vrms
500 Vrms
—
All windings
to core
1500 Vrms
1500 Vrms
1500 Vrms
Note: For Schematic B, primary is connected to secondary at pin 3.
The primary is not isolated from the secondary.
Schematics
A
1
B
Primary 3
5
2
Feedback
4
1
8
9
5
2
Feedback
4
Secondary
Primary 3
6
Primary 3
Secondary
4
9
2
6
2
Primary 3
Secondary
D
C
3
7
Secondary
4
1
Feedback
5
7
For Royer
For Royer
For full-bridge
For Royer
topologytopology
topologytopology
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 293-1 Revised 09/13/11
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 293 -2
CCFL Transformers
Package 1
0.310
max
7,87
1
10
0.044
1,13
0.004/0,10
0.975
min
24,77
0.965 max
24,51
0.825
max
20,96
0.028 typ
0,70
1
10
0.610
max
15,49
0.075
min
1,91
7
Recommended
Land Pattern
0.098 cen
2,50
7
0.050
1,27
6
10
6
0.098 cen
2,50
1
Weight:
5.5 – 6.1 g
Terminations: Tin-silver over tin over nickel over phos-bronze
Tape and reel:400/13″ reel 44 mm tape width
For packaging data see Tape and Reel Specifications section.
Package 4
0.205 max
5,21
9
1
0.004/0,10
0.037
0,93
1.275
max
32,39
0.028
0,70
9
1.295
32,89
1.100
27,95
1
0.063
cen
1,60
1.163
29,54
0.120
3,05
0.066
min
1,68
6
7
0.402 max
10,21
CL
Recommended
Land Pattern
7
6
0.020
(7×)
0,50
0.120
3,05
9
0.057
1,45
1
0.030 (8×)
0,76
0.157
4,00
0.157
4,00
0.063 (3×)
1,60
Weight:
3.6 g
Terminations: Tin-silver over tin over nickel over phos-bronze
Tape and reel:750/13″ reel 44 mm tape width
For packaging data see Tape and Reel Specifications section.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 293-2 Revised 09/13/11
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 293 -3
CCFL Transformers
Package 5 – In-board mounting
Dot indicates pin 1
0.016
typ
0,40
8
1
8
Recommended
Land Pattern
0.020
0,51
1
Minimum PCB cutout
0.366 max
9,30
0.382 × 1.173
9,70 × 29,80
7
6
0.225 max
5,72 7
0.063 cen
1,60
7
0.137
min
3,48
6
1.440
min
36,58
0.150 max
3,81
6
1.165
29,60
0.063 cen
1,60
In-board Mounting
1.439 max
36,55
Weight:
3.8 – 4.0 g
Terminations: Tin-silver over tin over copper over copper-steel
Tape and reel:1000/13″ reel 56 mm tape width
For packaging data see Tape and Reel Specifications section.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 293-3 Revised 09/13/11
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.