MSS1246

Document 471-1
Shielded Power Inductors – MSS1246
• 12 × 12 mm footprint; 4.6 mm high shielded inductors
• Very low DCR and excellent current handling
Designer’s Kit C410 contains 3 each of all values.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight: 2.3 g – 2.5 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 4.7 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
3
5
6
DCR SRF Isat (A) Irms (A)
typ4 10% 20% 30% 20°C40°C
(µH)
typ max (MHz) dropdrop drop rise rise
Inductance2 (mOhms)
MSS1246-102ML_ 1.0 ±20% 5.84 6.60 100 18.4 19.4 19.9
MSS1246-332ML_ 3.3 ±20% 12.1 13.60 51 10.1611.2411.76
MSS1246-472ML_ 4.7 ±20% 19.1 21.3 42
8.52 9.42 9.86
MSS1246-562ML_ 5.6 ±20% 22.1 24.6 37
7.64 8.66 9.28
MSS1246-682ML_ 6.8 ±20% 24.9 27.7 33
6.52 7.34 7.82
MSS1246-822ML_ 8.2 ±20% 27.4 30.5 31
5.98 6.80 7.34
MSS1246-103ML_ 10 ±20%
36.8 40.9 27
5.72 6.44 6.84
MSS1246-123ML_ 12 ±20%
38.9 43.3 24
5.02 5.76 6.22
MSS1246-153ML_ 15 ±20%
48.6 54.1 22
4.58 5.24 5.54
MSS1246-183ML_ 18 ±20%
51.0 56.7 19.0 4.28 4.78 5.14
MSS1246-223ML_ 22 ±20%
60.3 67.0 18.0 3.76 4.24 4.50
MSS1246-273ML_ 27 ±20%
67.5 75.0 16.0 3.46 3.92 4.18
MSS1246-333ML_ 33 ±20%
81.7 90.8 15.0 3.14 3.54 3.78
MSS1246-393ML_ 39 ±20%
95.2 105.8 13.3 2.72 3.14 3.38
MSS1246-473ML_ 47 ±20% 120.6 134.0 12.0 2.66 3.06 3.24
MSS1246-563ML_ 56 ±20% 133.8 148.7 10.6 2.34 2.64 2.80
MSS1246-683ML_ 68 ±20% 167.3 185.9
9.7 2.10 2.40 2.56
MSS1246-823ML_ 82 ±20% 188.5 209.5
8.8 1.80 2.06 2.24
MSS1246-104ML_ 100 ±20% 216.8 240.9
8.0 1.64 1.86 2.04
MSS1246-124KL_ 120 ±10% 287.2 319.2
7.2 1.62 1.82 1.92
MSS1246-154KL_ 150 ±10% 326.7 363.0
6.6 1.36 1.58 1.70
MSS1246-184KL_ 180 ±10% 379.5 421.7
5.9 1.34 1.48 1.60
MSS1246-224KL_ 220 ±10% 488.2 542.5
5.3 1.18 1.30 1.40
MSS1246-274KL_ 270 ±10% 560.1 622.4
4.7 1.04 1.18 1.24
MSS1246-334KL_ 330 ±10% 731.4 812.7
4.1 1.00 1.10 1.20
MSS1246-394KL_ 390 ±10% 813.7 904.2
3.8 0.91 1.00 1.08
MSS1246-474KL_ 470 ±10% 935.1 1039
3.5 0.81 0.92 0.98
MSS1246-564KL_ 560 ±10% 1193 1326
3.0 0.76 0.85 0.90
MSS1246-684KL_ 680 ±10% 1370 1523
2.8 0.68 0.77 0.82
MSS1246-824KL_ 820 ±10% 1590 1767
2.6 0.61 0.70 0.75
MSS1246-105KL_ 1000 ±10% 2090 2323
2.4 0.56 0.63 0.68
6.00
4.80
4.50
4.19
3.80
3.55
3.30
3.00
2.85
2.71
2.50
2.16
1.90
1.73
1.50
1.44
1.30
1.24
1.20
1.03
0.95
0.89
0.76
0.72
0.65
0.59
0.56
0.50
0.46
0.43
0.36
8.00
6.30
6.00
5.75
5.20
4.87
4.20
3.95
3.80
3.52
3.40
2.96
2.60
2.39
2.10
2.01
1.80
1.72
1.60
1.42
1.30
1.21
1.00
0.95
0.87
0.79
0.76
0.67
0.62
0.58
0.50
1. Please specify termination and packaging codes:
MSS1246-105KLC
Termination:L=RoHS compliant matte tin over
nickel over phos bronze.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS
tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (200 parts
per full reel).
B=Less than full reel. In tape, but
not machine ready. To have a
leader and trailer added ($25
charge), use code letter C
instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order only, not stocked
(800 parts per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms,
0 Adc using a Coilcraft SMD­‑A fixture in an
Agilent/HP 4263B LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 8753D
network analyzer and a Coilcraft SMD­‑D test
fixture.
5. DC current at 25°C that causes the specified
inductance drop from its value without current.
Click for temperature derating information..
6. Current that causes the specified temperature rise
from 25°C ambient. This information is for reference
only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Document 471-1 Revised 09/02/15
Document 471-2
Shielded Power Inductors – MSS1246
Typical L vs Current
Typical L vs Frequency
10000
10000
470 µH
180 µH
100
1000 µH
1000
1000 µH
Inductance (µH)
Inductance (µH)
1000
68 µH
27 µH
10
10 µH
470 µH
180 µH
100
68 µH
27 µH
10 µH
4.7 µH
10
4.7 µH
1
0.1
1
Current (A)
10
100
1
0.01
0.1
1
10
Frequency (MHz)
0.472 ±0.012
12,0 ±0,30
0.472 ±0.012
12,0 ±0,30
123
Dash
number
X
Internal
code
0.181 ±0.008*
4,6 ±0,20
Parts manufactured prior
to August 2011 may have
a different part marking.
Recommended
Land Pattern
0.217
5,5
0.197 ±0.008
5,0 ±0,20
0.157
4,0
0.138 ±0.016
3,5 ±0,40
0.197 ±0.016
5,0 ±0,40
0.335
8,5
* For optional tin-lead and tin-silver-copper terminations,
dimensions are for the mounted part. Dimensions before
mounting can be an additional 0.012 inch (0,3 mm).
Dimensions are in
inches
mm
Document 471-2 Revised 09/02/15