IDTQS3390 HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER INDUSTRIAL TEMPERATURE RANGE QUICKSWITCH® PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER FEATURES: • • • • • • • • IDTQS3390 DESCRIPTION: Enhanced N channel FET with no inherent diode to Vcc 16:8 multiplexer function with zero delay Ω bidirectional switches connect inputs to outputs 5Ω Zero propagation delay, zero ground bounce Low power CMOS proprietary technology Undershoot clamp diodes on all switch and control inputs Direct bidirectional connection for mux, demux Available in SOIC and QSOP packages The QS3390 provides a 16:8 multiplexer logic switch. The low ON resistance (5Ω) of the QS3390 allows inputs to be connected to the outputs without adding propagation delay and without generating additional ground bounce noise. Mux/Demux devices provide an order of magnitude faster speed than equivalent logic devices. The QS3390 is characterized for operation at -40°C to +85°C. APPLICATIONS: • Video, audio, graphics switching, muxing • Hot-swapping, hot-docking • Voltage translation (5V to 3.3V) FUNCTIONAL BLOCK DIAGRAM A0 AB 0 A7 AB 7 AE N B0 B7 BE N The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE MARCH 2000 1 c 2000 Integrated Device Technology, Inc. DSC-5759/2 IDTQS3390 HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER INDUSTRIAL TEMPERATURE RANGE ABSOLUTE MAXIMUM RATINGS(1) PIN CONFIGURATION Symbol Description VTERM(2) Max Unit A0 Supply Voltage to Ground –0.5 to +7 V 1 28 VCC VTERM(3) DC Switch Voltage VS –0.5 to +7 V B0 2 27 A7 VTERM(3) DC Input Voltage VIN –0.5 to +7 V AB0 3 26 VAC AC Input Voltage (pulse width ≤20ns) –3 V A1 4 25 B7 AB7 IOUT DC Output Current 120 mA B1 5 24 A6 PMAX Maximum Power Dissipation (TA = 85°C) 0.5 W TSTG Storage Temperature –65 to +150 °C AB1 6 23 B6 A2 7 22 AB6 B2 8 21 A5 9 20 B5 A3 10 19 AB5 B3 11 18 A4 AB3 AEN 12 13 17 B4 16 AB4 14 15 BEN AB2 GND NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC . CAPACITANCE (TA = +25°C, f = 1MHz, VIN = 0V, VOUT = 0V) Pins Typ. Max. (1) Unit Control Inputs SOIC/ QSOP/ TSSOP TOP VIEW 4 5 pF Quickswitch Channels Demux 5 7 pF (Switch OFF) Mux 9 10 NOTE: 1. This parameter is guaranteed but not production tested. PIN DESCRIPTION Pin Names I/O A0 - A 9 I/O Bus A Description B0 - B 9 I/O Bus B AEN, BEN I Bus Switch Enable FUNCTION TABLE(1) AEN BEN A0 - A9 B0 - B9 Function H H Off Off Disconnect L H On Off A to AB H L Off On B to AB L L On On A, B to AB NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level 2 IDTQS3390 HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Industrial: TA = –40°C to +85°C, VCC = 5V ± 5% Symbol Parameter VIH Input HIGH Voltage VIL IIN Test Conditions Min. Typ.(1) Max. Unit Guaranteed Logic HIGH for Control Pins 2 — — V Input LOW Voltage Guaranteed Logic LOW for Control Pins — — 0.8 V Input Leakage Current (Control Inputs) 0V ≤ VIN ≤ VCC — — ±1 µA IOZ Off-State Current (Hi-Z) 0V ≤ VOUT ≤ VCC — — ±1 µA RON Switch ON Resistance VCC = Min., VIN = 0V, ION = 30mA — 5 7 Ω VCC = Min., VIN = 2.4V, ION = 15mA — 10 15 VP Pass Voltage(2) VIN = VCC = 5V, IOUT = -5µA 3.7 4 4.2 NOTES: 1. Typical values are at VCC = 5V and TA = 25°C. 2. Pass voltage is guaranteed but not production tested. TYPICAL ON RESISTANCE vs VIN AT VCC = 5V 16 14 R ON (ohms) 12 10 8 6 4 2 0 0.0 0.5 1.0 1.5 2.0 VIN (Volts) 3 2.5 3.0 3.5 V IDTQS3390 HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER INDUSTRIAL TEMPERATURE RANGE POWER SUPPLY CHARACTERISTICS Symbol Parameter Test Conditions(1) Max. Unit ICCQ Quiescent Power Supply Current VCC = Max., VIN = GND or VCC, f = 0 3 µA ∆ICC Power Supply Current per Input HIGH(2) VCC = Max., VIN = 3.4V, f = 0 1.5 mA ICCD Dynamic Power Supply Current per MHz(3) VCC = Max., A, B, and AB Pins Open, Control Inputs Toggling 0.25 mA/MHz @ 50% Duty Cycle NOTES: 1. For conditions shown as Min. or Max., use the appropriate values specified under DC Electrical Characteristics. 2. Per TTL-driven input (VIN = 3.4V, control inputs only). A, B, and AB pins do not contribute to ∆Icc. 3. This current applies to the control inputs only and represents the current required to switch internal capacitance at the specified frequency. The A, B, and AB inputs generate no significant AC or DC currents as they transition. This parameter is guaranteed but not production tested. SWITCHING CHARACTERISTICS OVER OPERATING RANGE TA = -40°C to +85°C, VCC = 5V ± 5% CLOAD = 50pF, RLOAD = 500Ω unless otherwise noted. Symbol Min. (1) Parameter Typ. Max. Unit 0.25(3) ns tPLH tPHL Data Propagation Delay(2) tPZL tPZH Switch Turn-On Delay AEN, BEN to A, B, AB 1.5 6.5 ns tPLZ tPHZ Switch Turn-Off Delay(2) AEN, BEN to A, B, AB 1.5 5.5 ns A, B, to/from AB NOTES: 1. Minimums are guaranteed but not production tested. 2. This parameter is guaranteed but not production tested. 3. The bus switch contributes no propagation delay other than the RC delay of the ON resistance of the switch and the load capacitance. The time constant for the switch alone is of the order of 0.25ns at CL = 50pF. Since this time constant is much smaller than the rise and fall times of typical driving signals, it adds very little propagation delay to the system. Propagation delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side. 4 IDTQS3390 HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION IDTQS XXXXX Device Type XX Package X Process CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 Blank Industrial (-40°C to +85°C) SO Q QG Small Outline IC Quarter Size Outline Package QSOP - Green 3390 High Speed CMOS QuickSwitch 16:8 Multiplexer for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com 5 for Tech Support: [email protected] (408) 654-6459