pdf

4ArXS HSD ® –The tool
for your creativity
Innovative metal halide lamps for creative
architectural and effect lighting
Technical data 4ArXS HSD®
d
1
l
a
2
• Event and nightclub lighting
• Trade fair and exhibition
lighting
• Projected advertising
Safety:
Because HSD® lamps emit
UV radiation and operate
under positive pressure the
lamps should only be used in
an appropriate and fully enclosed luminaire. Suitable filters
should be used to ensure that
UV radiation is reduced to an
acceptable level. Exception:
HSD® 150 W with UV-reducing
outer bulb.
l
Longli
Especially suitable for:
• Architectural and effect
lighting
d
d
Type
Rated wattage
Lamp voltage
Operating current
Luminous flux
Colour temperature
Colour rendering index
Average lamp life
Length l max.
LCL a
Diameter d max.
Base
Fig. no.
HSD 150 W/70
150 W
97 V
1.8 A
12000 lm
7000 K
Ra > 85
3000 h
105 mm
56 mm
20 mm
G12
1
a
3
l
fe
HSD 150 W/UL/75*
150 W
97 V
1.8 A
11000 lm
7000 K
Ra > 85
6000 h
105 mm
56 mm
20 mm
G12
1
Longli
HSD 200 W/60
200 W
70 V
3.3 A
13000 lm
6000 K
Ra > 80
2000 h
108 mm
55 mm
23 mm
GY 9.5
2
HSD 250 W/60
250 W
90 V
3.1 A
17000 lm
6000 K
Ra > 85
2000 h
108 mm
55 mm
23 mm
GY 9.5
2
Longli
Type
Rated wattage
Lamp voltage
Operating current
Luminous flux
Colour temperature
Colour rendering index
Average lamp life
Length l max.
LCL a
Diameter d max.
Base
Fig. no.
1)
HSD 250 W/80
250 W
95 V
3.2 A
17000 lm
8000 K
Ra > 85
3000 h
108 mm
55 mm
23 mm
GY 9.5
2
HSD 575 W/60
575 W
88 V
7.4 A
45000 lm
6000 K
Ra > 85
3000 h
135 mm
65 mm
30 mm
GX 9.5
2
a
HSD 575 W/72
575 W
86 V
7.6 A
45000 lm
7200 K
Ra > 85
3000 h
135 mm
65 mm
30 mm
GX 9.5
3
HSD 250 W/UL/75
250 W
90 V
3.1 A
15000 lm
7500 K
Ra > 85
6000 h
108 mm
55 mm
23 mm
GY 9.5
2
fe
HSD 575 W/UL/75
575 W
86 V
7.6 A
43000 lm
7500 K
Ra > 80
6000 h
135 mm
65 mm
30 mm
GX 9.5
3
HSD 1200 W/601)
1200 W
100 V
13.8 A
110000 lm
6000 K
Ra > 85
3000 h
175 mm
85 mm
40 mm
G 22
not given
In development
* Operation only with electric control gear.
Optional system operation with POWERTRONIC®
PTU electronic control gear from OSRAM
(HSD® 150 W)
Picture credits:
Arcos Vallarta, Mexiko, Studio Due (Italy); Sony Center, Berlin (Germany); Arag-Tower, A&O Lighting Technology GmbH (Germany);
Chicago Bridge, Martin Professional (Germany); Cathedral Chartres, Paris, Clay Paky (Italy)
OSRAM GmbH
Hellabrunner Straße 1
81543 Munich
Germany
Tel.: +49 (0)89 6213-0
Fax: +49 (0)89 6213-2020
www.osram.com
Display/Optic Division
Nonnendammallee 44 – 61
13625 Berlin
Germany
Tel.: +49 (0)30 3386 2174
Fax: +49 (0)30 3386 2359
[email protected]
fe
z Errors and omissions excepted. Printed on paper treated with chlorine-free bleach.
Single-ended metal halide
lamps with 2,000 to 6,000
hours life in daylight version
(6000 K) or bright light
version (7000 - 8000 K). With
outer bulb for easy handling.
None hot restrike.
123 W098 GB 04/05 CO OSRAM CS CC Subject to change without notice.
4ArXS HSD®
Sets new standards:
4ArXS (“For Architainment
eXtreme Seal”) HSD® are
new, powerful metal halide
lamps from OSRAM with innovative eXtreme Seal technology. Thanks to excellent
maintenance, robustness
and a long service life, the
4ArXS opens up new prospects for creative architectural and effect lighting.
Higher thermal resilience
and long service life
Versatile in use, wide
range, easy handling
Confidence inspiring:
the benefits of 4ArXS HSD®
at a glance
While conventional metal
halide lamps begin to sweat,
the new 4ArXS lamp keeps
its cool even during really hot
performances: thanks to
innovative XS technology
(eXtreme Seal), the maximum
pinch temperature is increased from 350ºC to 450ºC.
From architectural lighting,
projected advertising and
nightclub lighting, through TV
shows to concerts, musicals
and theatre: 4ArXS HSD® ensure the right special effects
wherever you want them.
The high luminous efficacy,
tremendous colour stability
throughout the life of the
lamp and different colour
temperatures – daylight and
bluish-white “bright light” –
offer the user outstanding
cost-effectiveness and new
and varied design opportunities.
• Average service life of
2,000 to 6,000 hours
• Outstanding luminous
intensity and colour consistency throughout the
life of the lamp
• Low devitrification of the
bulb wall, therefore lesser
decline in system luminous
flux over the life of the lamp
• Daylight type (6000 K) and
“bright light” type (7000–
8000 K)
• Can be used with ECGs
and chokes
• Simple and reliable cold
starting
• Wattages of 150 to 1200 W
4ArXS HSD® from OSRAM
puts its rivals in the shade
not only in respect of thermal
resilience: the new patented
filling system dramatically
reduces devitrification and
thus enables an extra long
service life of 3,000 hours to
6,000 hours (believe it or not!)
for the UL versions.
4ArXS HSD® are available in
wattages of 150 to 1200 W.
The rugged, compact lamp
design and the thermal and
mechanical stability of the
lamp ensure easy handling
and safe operation – even
under difficult conditions.
4ArXS HSD® from OSRAM
Very special highlight:
4ArXS HSD® 150 W with
UV filter
The 4ArXS HSD® 150 W is
the first lamp in the HSD®
family to come with its own
UV filter.
Outstanding maintenance:
4ArXS HSD®
Luminous flux [lm]
50000
48000
46000
44000
42000
40000
0
1000
2000
3000
4000
5000
6000
Nominal life [h]
Uniform luminous efficiency throughout the life of the lamp
(< 10% decline in luminous flux over its service life):
4ArXS HSD ® 575W/UL/75
Typical curve of luminous flux over the average life
(measured in Ulbricht globe at rated wattage)
Colour temperature [K]
9000
8000
7000
6200
5000
0
1000
2000
3000
4000
Stable colour temperature throughout the life of the lamp
4ArXS HSD ® 575W/UL/75
Typical curve of colour temperature over the average life
(measured in Ulbricht globe at rated wattage)
5000
6000
Nominal life [h]