Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74HCT3G06
CMOS IC
INVERTER WITH
OPEN-DRAIN OUTPUTS
„
DESCRIPTION
The U74HCT3G06 provides three inverters with open-drain
outputs, it is compatible with TTL.
„
TSSOP-8
FEATURES
* Low power dissipation
* High speed
* High noise immunity
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
U74HCT3G06L-P08-R
U74HCT3G06G-P08-R
U74HCT3G06L-P08-T
U74HCT3G06G-P08-T
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
Package
Packing
TSSOP-8
TSSOP-8
Tape Reel
Tube
1 of 4
QW-R502-230.B
U74HCT3G06
„
„
CMOS IC
PIN CONFIGURATION
1A
1
8
VCC
3Y
2
7
1Y
2A
3
6
3A
GND
4
5
2Y
FUNCTION TABLE (each gate)
INPUT(A)
L
H
„
OUTPUT(Y)
Z
L
LOGIC DIAGRAM (positive logic)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 4
QW-R502-230.B
U74HCT3G06
„
CMOS IC
ABSOLUTE MAXIMUM RATINGS (unless otherwise specified)
PARAMETER
Supply Voltage
RATINGS
UNIT
-0.5~7
V
-0.5~VCC+0.5(active mode)
V
Output Voltage
VOUT
-0.5~7.0(high-impedance mode)
VCC or GND Current
ICC
50
mA
Input Clamp Current
IIK
±20
mA
Output Clamp Current
IOK
-20
mA
Output Current
IOUT
25
mA
Power Dissipation
PD
300
mW
Storage Temperature
TSTG
-65 ~ +150
℃
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage
Input Voltage
Output Voltage
Input Rise and Fall Times
Operating Temperature
„
Low-Level Output Voltage
Input Leakage Current
Output Leakage Current
Quiescent Supply Current
Additional Quiescent Supply Current
Input Capacitance
CONDITIONS
VCC=4.5V
MIN TYP MAX
4.5 5.0
5.5
0
5.5
0
VCC
6.0 500
-40 +25 +125
UNIT
V
V
V
ns
℃
SYMBOL
TEST CONDITIONS
VIH
VCC= 4.5V~5.5V
VIL
VCC= 4.5V~5.5V
VCC= 4.5V, IOL=20μA
VOL
VCC= 4.5V, IOL =4.0mA
II(LEAK)
VCC= 5.5V, VIN=VCC or GND
VCC=5.5V,VIN=VIH,
Io(LEAK)
VOUT=VCC or GND
IQ
VCC= 5.5V,VIN=VCC or GND,IOUT=0
VCC=4.5V to 5.5V,VIN=VCC -2.1V,
Δ IQ
IOUT=0
CIN
MIN
2.0
UNIT
V
V
V
V
μA
TYP MAX
1.6
1.2
0.8
0
0.1
0.15 0.33
±1.0
±5.0
μA
10
μA
375
μA
1.5
pF
MIN TYP MAX
9
24
12
27
6
19
UNIT
MIN
UNIT
pF
DYNAMIC CHARACTERISTICS (TA=25℃, tR, tF≤6.0ns)
PARAMETER
Propagation Delay From nA to nY
Output Transition Time
„
SYMBOL
VCC
VIN
VOUT
tR, tF
TA
STATIC CHARACTERISTICS (TA=25℃)
PARAMETER
High-Level Input Voltage
Low-Level Input Voltage
„
SYMBOL
VCC
SYMBOL
TEST CONDITIONS
tPZL
VCC=4.5V, CL= 50 pF
tPLZ
VCC=4.5V, CL= 50 pF
tTHL
VCC=4.5V, CL= 50 pF
ns
ns
OPERATING CHARACTERISTICS
PARAMETER
Power Dissipation Capacitance
SYMBOL
CPD
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
TYP MAX
4
3 of 4
QW-R502-230.B
U74HCT3G06
„
CMOS IC
TEST CIRCUIT AND WAVEFORMS
Note : CL includes probe and jig capacitance.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R502-230.B