MBR40L60CT/MBR40L60FCT SPECIFICATION Rev. A 40A LOW VF TRENCH MOS SCHOTTKY RECTIFIERS PRODUCT FEATURES 1. 2. 3. 4. 5. 6. Fig 1. TO-220AB FOR MBR40L60CT FLAMMABILITY CLASSIFICATION 94V-0 EXTREMELY LOW VF TRENCH MOS SCHOTTKY TECHNOLOGY LOW POWER LOSS / HIGH EFFICIENCY HIGH FREQUENCY OPERATION CASE: TRANSFER MOLDED TO-220AB FOR MBR40L60CT ITO-220AB FOR MBR40L60FCT DIMENSIONS IN INCHES AND (MILLIMETERS) LEADS: SOLDERABILITY PER MIL-STD-202 METHOD 208 WEIGHT: 2.15 GRAMS (TO-220AB) 1.55 GRAMS (ITO-220AB) RoHS/HALOGEN FREE 7. 8. 9. 10. Fig 2. ITO-220AB FOR MBR40L60FCT ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS (TA =25°C UNLESS OTHERWISE NOTED ) AND ELECTRICAL CHARACTERISTICS RATING SYMBOL V VRRM MAXIMUM RECURRENT PEAK REVERSE VOLTAGE 60 A VRMS 42 MAXIMUM RMS VOLTAGE L VDC 60 MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT 40 (PER U DEVICE) IO SEE FIG.1 20 (PERELEG) PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD PER LEG STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE MAXIMUM FORWARD VOLTAGE AT UNITS VDC VAC VDC A IFSM 280 A TSTG TJ - 55 TO +175 - 55 TO +150 0.65 0.60 0.78 0.75 °C °C IF= 20A TJ = 25°C TJ =125°C IF= 40A TJ = 25°C TJ =125°C MAXIMUM REVERSE CURRENT AT 25°C, PER LEG (NOTE 1) MAXIMUM REVERSE CURRENT AT 125°C, PER LEG (NOTE 1) TYPICAL THERMAL RESISTANCE JUNCTION TO CASE PER LEG ISOLATION VOLTAGE FROM TERMINAL TO HEATSINK T=1MIN VF IR IR Rθjc 0.25 50 MBR40L60CT: 2.2 MBR40L60FCT: 4.0 1500 (FOR MBR40L60FCT) V mA mA °C/W VAC NOTE︰ 1. PULSE TEST: 300µS PULSE WIDTH, 1% DUTY CYCLE. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 MBR40L60CT/MBR40L60FCT SPECIFICATION Rev. A RATINGS AND CHARACTERISTIC CURVES Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989