Data Sheet AH534C_W Part Number : SPHWH1A5NA30 SPHWH1A5NA30 Introduction Part number : SPHWH1A5NA30 Automotive head lamp lighting source Features Package : Silicone covered ceramic substrate Dimension : 5.3mm x 3.3mm Luminous flux : 1200lm @ 1000mA Color coordinates group : Appropriate to ECE Chip configuration : 4 chip array (1x4) Viewing angle : 120˚ ESD Voltage : up to 8kV acc. to ISO10605-contact Applications Automotive head lamp : Low/High beam Fog lamp DRL lamp Motorcycle head lamp Environmental compliance Samsung is compliant to the restrictions of hazardous substances in electronic equipment, namely, the RoHS, ELV, ISO14001 and REACH directives. Samsung will not intentionally supplement the restricted materials to the head lamp LED product : Cd, Pb, Hg, PBBs, PBDEs and Cr6+ 2016.03.14 / Rev.00 - 1 - SPHWH1A5NA30 Table of Contents Product overview ------------------------- 3 Part number description ------------------------- 3 Characteristics ------------------------- 4 Typical characteristics ------------------------- 4 Luminous flux bin ------------------------- 4 Forward voltage bin ------------------------- 4 Color coordinates bin ------------------------- 5 Absolute maximum ratings ------------------------- 6 Typical characteristic graphs ------------------------- 7 Mechanical dimension ------------------------- 11 Soldering information ------------------------- 12 Packing information ------------------------- 13 Product labeling information ------------------------- 15 Reliability test condition ------------------------- 16 Precaution ------------------------- 17 Revision history ------------------------- 18 Company information ------------------------- 18 2016.03.14 / Rev.00 - 2 - SPHWH1A5NA30 Product overview • Luminous flux Part number Color of emission Luminous flux Form factor SPHWH1A5NA30 White T y p . 1200 lm 1 x 4 • Optical source configuration and electric schematic diagram X : 4.67 mm Y : 1.09 mm Tolerance : ± 0.1mm Part number description The part number designation is explained as follows : SP H WH 1 A5 N A 3 0 XX XX XX AB C GH I J L MN QR DE F K OP Where: AB - designates company name and package (SP for Samsung LED Package) C - designates package details (H for high power package) DE - designates color (WH for white) F - designates version of product (1 for first version up) GH - designates type of package (A5 for Automotive 5.3x3.3 mm2) I - designates type of lens (N for no lens type) J - designates maximum power (A for 10.5~20.0W) K - designates special internal code (3 for 3 L - designates CRI (0 for default) MN - designates forward voltage (W2 for 1 2 ~ 1 5 V ) rd version) OP - designates CIE Coordination (R1 for R 1 ) QR - designates luminous flux (PB for 1 1 0 0 ~ 1 4 0 0 l m ) 2016.03.14 / Rev.00 - 3 - SPHWH1A5NA30 Characteristics • Typical characteristics [Tj =25 ℃][1] Parameter Symbol Value Unit lm Typ. 1200 lm VF(25℃) VF(85℃) 13.5 13.1 V Reverse voltage (IF = 10 mA) VR 0.9 V Viewing angle φ 120 Degree Reverse current IR Luminous flux (IF = 1000 mA) Forward voltage (IF = 1000 mA) Not designed for reverse operation mA Thermal resistance (Typ.) Rth_J-S 1.0 K/W (Junction to solder point) (Max.) Rth_J-S 1.2 K/W A 5.09 mm2 Radiant surface • Luminous flux bin[2] Symbol ΦV Condition IF = 1000 mA [Tj =25 ℃][1] Bin code Min. Typ. Max. NA 1100 1200 PA 1200 1300 QA 1300 1400 Forward voltage bin[2] Symbol VF Condition IF = 1000 mA Unit lm [Tj =25 ℃][1] Bin code Min. Typ. Max. WC 12 13 WD 13 14 WE 14 15 Unit V * Notes [1] Measurement condition : LED(Tj) = Ambient temperature(Ta), by applying pulse current for under 3 5 msec. [2] Luminous flux measuring equipment : CAS140CT ΦV and VF tolerances are ±10 % and ±5 %, respectively. 2016.03.14 / Rev.00 - 4 - SPHWH1A5NA30 • Color coordinates bin[3] Symbol Condition Bin code = Cx, Cy IF1000 mA R1 Cx 0.3186 0.3203 0.3349 0.3355 0.3484 0.3274 0.3404 0.3633 • Color bin definition * Notes [3] Luminous flux measuring equipment : CAS140CT Color coordinates : Cx, Cy according to CIE 1931. Color bin : R1 according to IEC/PAS 62707-1 Cx and Cy tolerances are ±0.005, respectively. 2016.03.14 / Rev.00 Cy - 5 - SPHWH1A5NA30 Absolute maximum ratings Parameter Symbol Value Unit Operating temperature range TOp. -40 ~ +125 ℃ Storage temperature range TStg. -40 ~ +125 ℃ +150 ℃ Tj ST +175 ℃ IF 1,500 mA IF 50 mA VR 0.9 V - -8.0 ~ +8.0 for HBM kV Junction temperature Tj Max. Junction temperature for short time applications[4] Maximum forward current[5] (Ta : 25 ℃)[6] Minimum forward current[5] (Ta : 25 ℃)[6] Reverse voltage (Ta : 25 ℃[6]) ESD sensitivity[8] * Notes [4] The median lifetime (L70/B50) for Tj = 175°C is 100h. [5] Unpredictable performance may be resulted by driving the product at below Min. IF or above Max. IF. [6] The measurement condition means that temperature dependence is excluded by applying pulse current for under 35 msec. [7] Duty 1/10 pulse with 10 msec. [8] The ESD test has to apply with ESD protection diode having protection voltage of minimum 36V on a metal PCB. It is strongly recommended that the LED product should be used with Zener diode mentioned for the ESD qualification.. 2016.03.14 / Rev.00 - 6 - SPHWH1A5NA30 Typical characteristic graphs Typical spectrum IF = 1000 mA, Ta = 25 °C[9] Typical color vs. radiation angle IF = 1000 mA, Ta = 25 °C[9] * Notes [9] The measurement condition means that temperature dependence is excluded by applying pulse current for under 35 msec. 2016.03.14 / Rev.00 - 7 - SPHWH1A5NA30 Relative luminous flux & forward voltage vs. forward current[10] Ta = 25 °C Color coordinates shift vs. forward current[10] Ta = 25 °C * Notes [10] The measurement condition means that temperature dependence is excluded by applying pulse current for under 35 msec. 2016.03.14 / Rev.00 - 8 - SPHWH1A5NA30 • Luminous flux & forward voltage vs. temperature[11] IF = 1000 mA Tb(℃) Tb(℃) Color coordinates shift vs. temperature[11] IF = 1000 mA Tb(℃) * Notes [11] The measurement condition means that temperature dependence is excluded by applying pulse current for under 35 msec. 2016.03.14 / Rev.00 - 9 - SPHWH1A5NA30 • Typical radiant pattern Chip array : 1 X 4 • Permissible forward current[12] IF = f(Tc), Rth Max. Tb(℃) * Notes [12] The measurement condition means that temperature dependence is excluded by applying pulse current for under 35 msec. 2016.03.14 / Rev.00 - 10 - SPHWH1A5NA30 Mechanical dimension[13] (Unit : mm) [Top view] [Side view] [Front view] • Electric schematic diagram * Notes [13] Tolerance unless otherwise specified is ± 0.1 mm. 2016.03.14 / Rev.00 - 11 - SPHWH1A5NA30 Soldering conditions • Pad configuration & solder pad layout[14] [Pad configuration] (Unit : mm) [Recommended solder pad & stencil] * Notes [14] Tolerance unless otherwise specified is ± 0.1 mm. Reflow soldering condition (Pb free) Reflow frequency : 2 times max. Manual soldering condition Not more than 5 seconds @Max. 300 ℃, under soldering iron(one time only) 2016.03.14 / Rev.00 - 12 - SPHWH1A5NA30 Packing information Tape and reel ※ PKG taping direction PKG Taping hole START END LED Mounting Part No LED (Min.100ea) No LED (Min.100ea) [Unit: mm] Symbol Spec. A B C D E F G H I J K L 0.3 5.6 1.2 2 8 40 4 1.7 5.5 12 ±0.05 ±0.1 ±0.1 Φ1.5 +0.1 ±0.05 ±0.1 ±0.2 ±0.1 ±0.1 ±0.05 ±0.3 Φ15 +0.1 [Unit: mm] Symbol A B C D E Spec. 17.5 ±1 13 ±0.3 80 ±1 Φ330 ±0.1 13 ±0.5 2016.03.14 / Rev.00 - 13 - SPHWH1A5NA30 Packing process (Unit : mm) Width Length Height Remark 225 250 190 7 inch type 2016.03.14 / Rev.00 - 14 - SPHWH1A5NA30 Product labeling information Label information ABCDEF Bin code Part number SPHWHTA5NA00 W2RSDD XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 PCS Lot number IIIIIIIIIIIIIIIIIIIIIIIII 1. Bin code AB : Forward voltage(VF) bin CD : Color coordinates(Cx, Cy) bin EF : Luminous flux(ΦV) bin 2. Lot number ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 pcs ① : Production site (S : Samsung Korea, G : Tianjin China) ② ④ : L (LED) : Product state (A : Normality, B : Bulk, C : First production, R : Reproduction, S : Sample) : Year (X : 2013, Y : 2014, Z : 2015...) ⑤ : Month (1 ~ 9, A, B, C) ⑥ : Day (1 ~ 9, A, B ~ V) ⑦⑧⑨ : Samsung LED product number (1 ~ 999) ⓐⓑⓒ : Reel number (1 ~ 999) ③ 2016.03.14 / Rev.00 - 15 - SPHWH1A5NA30 Reliability test conditions For detailed Information please contact your Samsung sales partner 2016.03.14 / Rev.00 - 16 - SPHWH1A5NA30 Precaution 1) Absolute maximum ratings are set to prevent LED products from breaking due to extreme stress (temperature, current, voltage, etc.). Usage conditions must never go above the ratings, nor any of two of the factors reach the rating level simultaneously. 2) Please avoid touch or pressure on resin molded part in the products. To handle the products directly, it is strongly recommended to use non metallic tweezers and grip the ceramic part. 3) Device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung, they should be packed by a sealed container with nitrogen gas injected. 5) After bag is opened, device subjected to soldering, solder reflow, or other high temperature processes must be : a. Mounted within 672 hours at an assembly line with a condition of no more than 30 ℃ / 60 % RH, b. Stored at < 10 % RH. 6) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 8) Prepare a ESD protective area by placing conductive mattress (106Ω) and ionizer to remove any static electricity. 9) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organic additives which is used in luminaires (fixture) and LED silicone bags are permeable to it. It may lead a discoloration when LED expose to heat or light. This phenomenon can give a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend you to know the physical properties for the materials used in luminaires, It requires to select carefully 2016.03.14 / Rev.00 - 17 - SPHWH1A5NA30 Revision history Date Revision history 2015.03.14 Rev.01: Initial version Author Drawn Approved S.Y. Go S.B. Kwak Company Information US Samsung Semiconductor Inc., 3655 N. First Street, San Jose CA 95134, USA TEL. +1-408-544-4000 Europe Samsung Electronics Germany GmbH, Samsung House, Am Kronberger Hang 6, Schwalbach/Ts,Germany TEL. +49-6196-66-0 Japan Copyright @1995-2012 All rights reserved Samsung Electronics San #24, Nongseo-Dong, Giheung-Gu, Yongin-City, Gyeongii-Do 446-711 Korea http://www.samsung.com/sec/business/# Sales Contact : [email protected] 2016.03.14 / Rev.00 Samsung Japan Corporation SLED Team 10F, Shinagawa Grand Central Tower 2-16-4, Kounan, Minato-ku, Tokyo 108-8240, Japan TEL. +81-3-6369-6327 China (Tianjin Office in China) Tianjin Samsung LED Co., LTD. Weisi (6th) Rd., Micro-Electronics Industrial Park, Xiqing District, Tianjin 300385, China TEL. +86-755-8608-5550 - 18 -