TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 433.92MHz SMD5X5 TST Parts No.: TA0220A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Jacky Huang Approval by: Vincent Lee Date: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 1 FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 433.92 MHz MODEL NO.: TA0220A REV. NO.:1 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 12 V 3.Operating Temperature: -40°C to +85°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Center frequency FC (MHz) Minimum I.L. (433.8~434.12 MHz) Pass band (relative to ILmin) 433.76~434.08 MHz 433.74~434.10 MHz 433.68~434.16 MHz Pass bandwidth (relative to ILmin) Attenuation:( relative to ILmin) 10~414 MHz (dB) (dB) (dB) BW3 (KHz) (dB ) (dB ) 414~428 MHz 428~432.84 MHz 434.92~442 MHz 442~550 MHz 550~1000 MHz (dB ) (dB ) (dB ) (dB ) (dB ) (dB) ILmin Min. Typ. Max. Note - 433.92 2.0 3.5 1 670 1.0 1.0 1.5 - 2.0 3.0 6.0 - 45 30 15 10 30 45 50 35 25 15 35 55 - 1 1 173Ω // 4.6 pF 187Ω // 4.8 pF Impedance at FC ; Input ZIN =RIN//CIN Output ZOUT =ROUT//COUT Note1. The standard definitions is in JIS C 6703 Note2. Source im pedance 2 Load im pedance 50Ω 50Ω Z IN =173Ω // 4.6pF Z O UT =187Ω // 4.8pF TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.FREQUENCY CHARACTERISTICS: TA0220A 0 -5 dB -10 -15 -20 -25 432.9 433.4 433.9 434.4 434.9 Frequency TA0220A 0 -10 -20 dB -30 -40 -50 -60 -70 -80 409 414 419 424 429 434 439 444 449 454 459 Frequency TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω 2 SAW Filter 50Ω 5 33nH 33nH 6PF 7PF 1,3,4,6,7,8 E.OUTLINE DRAWING: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PACKING: 1.REEL DIMENSION 2.TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5