TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 1086 MHz SMD3.0X3.0 mm TST Parts No.:TA0227A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Jacky Huang Approval by: Francis Chen Date: 2003/1/13 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1086 MHz MODEL NO.: TA0227A REV. NO.:1 A. MAXIMUM RATING: 1.Operating Temperature: -40°C ~ +85°C 2.Storage Temperature: -40°C ~ +85°C B. Characteristics : 1.Balance to Balanced operation 2.Terminating source impedance : 3.Terminating load impedance : Zs = 200 Ω ZL = 200 Ω Characteristics Center frequency FC MHz Insertion loss( 1081~1091 MHz) I.L.min dB Ripple ( 1081~1091MHz)(over 6MHz) dB Attenuation:( Reference level from I.L.min ) 500~988 MHz dB 988~1002 MHz dB 1038~1046 MHz dB 1156~1600 MHz dB 2040~2148 MHz dB Phase Balance (1081~1091 MHz) deg. Group delay ripple(p-p) ( 1081~1091MHz) nS Min. Value Typ. Max. - 1086 - - 3.2 1.0 5.0 1.5 50 40 40 40 35 - 55 45 45 50 45 10 10 - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document Note - - 2 - C. Frequency Characteristics : 1. Sdd21 Response TA0227A 0 -2 -4 -6 dB -8 -10 -12 -14 -16 -18 -20 1061 1066 1071 1076 1081 1086 1091 1096 1101 1106 1111 Frequency(MHz) 2. Sdd21 Response (wide band) TA0227A 0 -10 -20 -30 dB -40 -50 -60 -70 -80 -90 936 986 1036 1086 1136 1186 1236 Frequency(MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. Measurement Circuit: E. Outline Drawing: F Δ V Date Code Pin configuration 1,3 Balanced input 5,7 Balanced output 2,4,6,8 Case grounded Δ: Half year code □: Date code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - F. PACKING: 1. REEL DIMENSION F V Δ 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 -