TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW IF Filter 90MHz TST Parts No.: TB 0283A ( package 9.1 mm x 4.8 mm ) Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 2005/09/14 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 1 FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL : 886-3-4690038 FAX : 886-3-4697532 E-mail : [email protected] Web: www.taisaw.com IF SAW Filter 90 MHz ( package 9.1 mm x 4.8 mm ) MODEL NO.: TB0283A REV. NO.:2 A. MAXIMUM RATING: 1.Storage Temperature: -40°C to +85 °C. ELECTRICAL CHARACTERISTICS: Characteristic Units RoHS Compliant Lead free Lead-free soldering MHz Minimum - Insertion Loss, IL dB - Pass band Ripple at Fo±300kHz dB - 0.5 1.0 Phase Linearity at Fo±630kHz dB - 2.5 4.0 - 50/1000 - Center frequency, Fo Source Impendence ( single ended/Balanced)(1) Load Impendence ( single ended/Balanced) (1) Ω Typical 90.00 9.5 Maximum 11.0 50/1000 Ω Relative attenuation: Fo+630kHz dB - 3.5 5.0 Fo-630kHz dB - 3.5 5.0 Fo+900kHz dB 33 37 - Fo-900kHz dB 33 37 - Fo+1.7MHz dB 35 40 - Fo-1.7MHz Substrate Material Package type & size Height dB 35 40 - Quartz 9.1 x 4.8 1.5 Note: (1) With matching Network (Ref. Testing Environment Circuit as shown below) mm² mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS: Figure-1 S21 Response(Wide Band/Span=5MHz) Figure-2 S21 Response(Pass Band/Span=5MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. OUTLINE DRAWING: PIN Descriptions: 85.38 1 : Input 2 : Input or Ground 6 : Output 7 : Output or Ground 3,4,5,8,9,10 : Ground □ : Date code Unit : mm F.TEST CIRCUIT L2 out bottom view C2 L1 in C1 Test Fixture & Values Input Output L1 : 330nH Q>40, C1 : 51pF L2 : 242nH Q>40, C2 : 82pF TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4