TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 130.34MHz 27MHz BW (SMD 13.3×6.5 mm) MODEL NO.: TB1015A REV. NO.1 A. MAXIMUM RATING: 1. Operating temperature range: -30°C to65°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm 4. Maximum DC Voltage : 10V RoHS Compliant Lead free Lead-free soldering B. Characteristics : Item Unit MHz Min. - Type. 130.34 Max. - Insertion Loss, IL dB - 11.1 16.0 1dB Band Width MHz 27.0 30.4 dB - 0.6 Center frequency, Fc Amplitude Ripple Fc+/-12.5MHz 1.0 Attenuation (Reference level from typical Insertion loss ) DC ~104 MHz dB 40 50 153 MHz ~ 800 MHz dB 40 42 ppm/°C - -94 - Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Temperature Coefficient TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : (1) Narrow band Response:(span 200MHz) Fig1. Horizontal: 20MHz/Div Vertical: 10dB/Div (2) Pass band Response and Group Time Delay response: Fig2. Horizontal: 5MHz/Div TAI-SAW TECHNOLOGY CO., LTD. Vertical: 1dB/Div Vertical: 100ns/Div TST DCC Release document 3 (3) Wide band Response:(span 800MHz) Fig3. Horizontal: 80MHz/Div Vertical: 10dB/Div (4) Smith Chart TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. Matching Circuit: L1=39nH C1=150pF L2=47nH C2=68pF E. Outline Drawing: 1015 #K : Input #L : Input Ground #E : Output #F : Output Ground #A,B,C,D,G,H,I,J : Ground □: Week Code (Follow the table from planner each year) Unit: mm △ : Product / Year Code Year 2009 2013 2010 2014 2011 2015 2012 2016 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PCB Footprint: G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7