1N4933G THRU 1N4937G SPECIFICATIONS Rev. A 1A FAST RECOVERY GLASS PASSIVATED RECTIFIER PRODUCT FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. FLAMMABILITY CLASSIFICATION: 94V-0 GLASS PASSIVATED CHIP JUNCTION 1A OPERATION @ 55°C WITH NO THERMAL RUNAWAY FAST SWITCHING FOR HIGH EFFICIENCY EXCEED MIL-STD-19500 CASE: JEDEC DO-41, MOLDED CASE DIMENSIONS IN INCHES AND (MILLIMETERS) POLARITY: INDICATED BY CATHODE BAND WEIGHT : 0.34 GRAMS TERMINALS SOLDERABILITY: PER MIL-STD-202, METHOD 208 PULLING TEST: 2.3 KG RoHS MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED. STORAGE AND OPERATING TEMPERATURE RANGE -55°C TO +150°C. SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT, 0.375”(9.5mm) LEAD LENGTH @ 55°C PEAK FWD SURGE CURRENT, 8.3ms HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE(NOTE1) TYPICAL THERMAL RESISTANCE (NOTE 2) MAXIMUM FORWARD VOLTAGE MAXIMUM REVERSE CURRENT @ 25°C MAXIMUM REVERSE CURRENT @ 100°C MAXIMUM REVERSE RECOVERY TIME SYMBOL VALUE UNITS IO 1 30 15 50 1.2 5 50 120 A A pF °C/W V uA uA nS IFSM CJ Rθja VF IR IR TRR 1. MEASURED @ 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1 (mm) COPPER PLATE @ LEAD LENGTH 5mm 3. MAXIMUM FORWARD VOLTAGE AT Io DC 4. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A PART NUMBER MAX RECURRENT PK REV VOLTAGE VRRM (V) MAX RMS VOLTAGE VRMS (V) MAX DC BLOCKING VOLTAGE VDC (V) 1N4933G 1N4934G 1N4935G 1N4936G 1N4937G 50 100 200 400 600 35 70 140 280 420 50 100 200 400 600 Frontier Electronics Corp.® http://frontierusa.com/ 1 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 1N4933G THRU 1N4937G SPECIFICATIONS Rev. A RATING AND CHARACTERISTIC CURVES Frontier Electronics Corp.® http://frontierusa.com/ 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989