High-reliability discrete products and engineering services since 1977 MBR20200CT 20 A SCHOTTKY RECTIFIER FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Symbol MBR20200CT Unit Peak repetitive reverse voltage Working peak reverse voltage DC blocking voltage Rating VRRM VRWM VR 200 V Average rectified forward current (Rated VR) IF(AV) 20 @ TC = 125°C A Peak repetitive forward current (Rated VR) square wave, 20 kHz) IFRM 20 @ TC = 90°C A Non-repetitive peak surge current (surge applied at rated load conditions, halfwave, single phase, 60Hz) IFSM Peak repetitive reverse surge current (2.0µs, 1.0kHz) IRRM 1.0 A Operating junction temperature range TJ -65 to +150 °C Storage temperature range Tstg -65 to +175 °C dv/dt 10000 V/µs RӨJC 2.0 Symbol MBR20200CT Voltage rate of change (Rated VR) Maximum thermal resistance Junction to case A 150 °C/W ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Maximum instantaneous forward voltage (IF = 10A, TC = 25°C) (IF = 10A, TC = 125°C) (IF = 20A, TC = 25°C) (IF = 20A, TC = 125°C Unit (1) VF 0.9 0.8 1.0 0.9 V Maximum instantaneous reverse current (1) (Rated dc voltage, TC = 25°C) (Rated dc voltage, TC = 125°C) IR 1.0 50 mA Capacitance (VR = -5.0v, TC = 25°C, f = 1.0MHz) Ct 500 pF Rev. 20121130 High-reliability discrete products and engineering services since 1977 MBR20200CT 20 A SCHOTTKY RECTIFIER MECHANICAL CHARACTERISTICS Case TO-220AB Marking Alpha-numeric Pin out See below Rev. 20121130 High-reliability discrete products and engineering services since 1977 MBR20200CT 20 A SCHOTTKY RECTIFIER Rev. 20121130 High-reliability discrete products and engineering services since 1977 MBR20200CT 20 A SCHOTTKY RECTIFIER Rev. 20121130