UNISONIC TECHNOLOGIES CO., LTD TGBR5L45 Preliminary DIODE TRENCH MOS SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC TGBR5L45 is a trench mos schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high current capability, etc. The UTC TGBR5L45 suitable for free wheeling, high frequency inverters, polarity protection, and low voltage. FEATURES * Low forward voltage drop * High current capability * High surge capability * High efficiency SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free TGBR5L45L-TN3-R TGBR5L45G-TN3-R Note: Pin Assignment: A: Anode K: Common Cathode Package TO-252 Pin Assignment 1 2 3 A K A Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R232-017.a TGBR5L45 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage (Note 1) VRM 45 V Working Peak Reverse Voltage VRWM 45 V Peak Repetitive Reverse Voltage VRRM 45 V RMS Reverse Voltage VR(RMS) 32 V Average Rectified Output Current TC=125°C IO 5 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 90 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65 ~ +175 °C Storage Temperature TSTG -65 ~ +175 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (Note 3) PARAMETER SYMBOL θJA θJC Junction to Ambient Junction to Case RATINGS 110 6 UNIT °С/W °С/W ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR=0.50mA IF=5A, TC=25°C Forward Voltage Drop VFM IF=5A, TC=125°C Peak Reverse Current at Rated DC VR=45V, TC=25°C IRM Blocking Voltage (Note 1) VR=45V, TC=125°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. 3. Mounted on an FR4 PCB, single-sided copper, with 100cm2 copper pad area. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 45 TYP MAX UNIT V 0.58 V 0.53 V 300 μA 40 mA 2 of 3 QW-R232-017.a TGBR5L45 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R232-017.a