UNISONIC TECHNOLOGIES CO., LTD TGBR10U100 Preliminary DIODE TRENCH MOS SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC TGBR10U100 is a trench mos schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high current capability, etc. The UTC TGBR10U100 suitable for free wheeling, high frequency inverters, polarity protection, and low voltage. FEATURES * Ultra low forward voltage drop * High current capability * High surge capability * High efficiency SYMBOL ORDERING INFORMATION Ordering Number Pin Assignment Package Lead Free Halogen Free 1 2 3 4 5 6 TGBR10U100L-TA3-R TGBR10U100G-TA3-R TO-220 A K A TGBR10U100L-TF3-T TGBR10U100G-TF3-T TO-220F A K A TGBR10U100G-K08-5060-R DFN-8(5×6) A A A NC K K Note: Pin Assignment: A: Anode K: Common Cathode NC: No Comment 7 K Packing 8 - Tape Reel - Tape Reel K Tape Reel MARKING TO-220 / TO-220F www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd DFN-8(5×6) 1 of 3 QW-R232-038 .a TGBR10U100 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 100 V Working Peak Reverse Voltage VRWM 100 V Peak Repetitive Reverse Voltage VRRM 100 V Average Rectified Output Current IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 200 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (PER LEG) PARAMETER SYMBOL TO-220 θJC Typical Thermal Resistance TO-220F DFN-8(5×6) θJA Note: FR-4 PCB, 2 oz Copper. Minimum recommended pad layout. RATINGS 2 4 72 (Note) UNIT °C/W °C/W °C/W ELECTRICAL CHARACTERISTICS (PER LEG) (TA =25°C unless otherwise specified.) PARAMETER Reverse Breakdown Voltage SYMBOL V(BR)R TEST CONDITIONS IR=0.50mA IF=10A, TC=25°C Forward Voltage Drop VFM IF=10A, TC=125°C VR=100V, TC=25°C Leakage Current IRM VR=100V, TC=125°C Note: Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 100 TYP MAX UNIT V 0.62 V 0.57 V 200 μA 100 mA 2 of 3 QW-R232-038.a TGBR10U100 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R232-038.a