UNISONIC TECHNOLOGIES CO., LTD MGBR15U50 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION 1 The UTC MGBR15U50 is a surface mount mos gated barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high switching speed etc. The UTC MGBR15U50 suitable for supply applications. DFN-8(5x6) FEATURES * Ultra low forward voltage drop * High switching speed SYMBOL ORDERING INFORMATION Ordering Number Package MGBR15U50G-K08-5060-R DFN-8(5×6) Note: Pin Assignment: A: Anode K: Common Cathode Pin Assignment 1 2 3 4 5 6 A A A NC K K NC: No Comment 7 K 8 K Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R204-078.a MGBR15U50 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 50 V Working Peak Reverse Voltage VRWM 50 V Peak Repetitive Reverse Voltage VRRM 50 V Average Rectified Output Current IO 15 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 200 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (PER LEG) PARAMETER SYMBOL Typical Thermal Resistance θJA Note: FR-4 PCB, 2 oz Copper. Minimum recommended pad layout. RATINGS 72 UNIT °C/W ELECTRICAL CHARACTERISTICS (PER LEG) (TA =25°C, unless otherwise specified.) PARAMETER Reverse Breakdown Voltage SYMBOL V(BR)R TEST CONDITIONS IR=0.5mA IF=15A, TJ=25°C Forward Voltage Drop VFM IF=15A, TJ=125°C VR=50V, TJ=25°C Leakage Current IRM VR=50V, TJ=125°C Note: Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 50 TYP MAX UNIT V 0.45 V 0.41 V 500 μA 25 mA 2 of 3 QW-R204-078.a MGBR15U50 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R204-078.a