XOSM-531 www.vishay.com Vishay Dale Surface Mount Oscillator FEATURES • Size: 5.0 x 3.2 x 1.3 (mm) • Miniature package • Tri-state enable/disable • HCMOS compatible • Tape and reel The XOSM-531 series is an ultra miniature package clock oscillator with dimensions 5.0 mm x 3.2 mm x 1.3 mm. It is mainly used in portable PC and telecommunication devices and equipment. • IR re-flow • 1.8 V input voltage • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS PARAMETER Frequency range SYMBOL CONDITION VALUE FO - 1.544 MHz to 100.000 MHz all conditions ± 25 ppm, ± 50 ppm, ± 100 ppm Frequency stability (1) 0 ºC to 70 ºC Operating temperature range TOPR - Storage temperature range TSTG - - 55 ºC to + 125 ºC Power supply voltage VDD - 1.8 V ± 10 % Aging (first year) Supply current IDD Output symmetry Rise time Fall time Output voltage - 40 ºC to + 85 ºC (option) 25 ºC ± 3 ºC ± 5 ppm 1.544 MHz to 9.999 MHz 6 mA max. 10.000 MHz to 34.999 MHz 7 mA max. 35.000 MHz to 49.999 MHz 15 mA max. 50.000 MHz to 100.000 MHz 25 mA max. Sym at 1/2 VDD 40 %/60 % (45 %/55 % option) tr 10 % VDD to 90 % VDD 5 ns max. tf 90 % VDD to 10 % VDD 5 ns max. VOH - 90 % VDD min. VOL - 10 % VDD max. Output load HCMOS load - 30 pF max. (15 pF typ.) Start-up time ts - Pin 1, tri-state function 10 ms max. pin 1 = H or open (output active at pin 3) - pin 1 = L (high impedance at pin 3) Note (1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration DIMENSIONS in inches [millimeters] 0.047 ± 0.003 [1.20 ± 0.1] 0.047 [1.2] #4 #1 0.1 ± 0.003 [2.54 ± 0.1] 0.197 ± 0.008 [5.0 ± 0.2] #3 0.130 ± 0.008 [3.3 ± 0.2] 0.051 [1.3] max. 0.047 [1.2] 0.1 [2.54] 0.055 [1.4] PIN #1 #2 #3 #4 CONNECTION TRI-STATE/NC GND OUTPUT VDD #2 0.087 [2.2] Note • A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise Revision: 26-Apr-13 Document Number: 35059 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XOSM-531 www.vishay.com Vishay Dale ORDERING INFORMATION XOSM-531 B R E 50M e4 MODEL FREQUENCY STABILITY OTR ENABLE/DISABLE FREQUENCY/MHz JEDEC LEAD (Pb)-FREE AA = 0.0025 % (25 ppm) A = 0.005 % (50 ppm) B = 0.01 % (100 ppm) blank = standard R = - 40 °C to + 85 °C E = disable to tri-state standard GLOBAL PART NUMBER X O 6 1 MODEL C T E A N FREQUENCY STABILITY OTR ENABLE/ DISABLE PACKAGE CODE A 5 OPTIONS 0 M FREQUENCY GLOBAL PART NUMBERING OPTIONS X O 5 7 MODEL NUMBER XO63 = XOSM-533 XO62 = XOSM-532 XO61 = XOSM-531 XO57 = XOSM-57 XO37 = XOSM-573 XO27 = XOSM-572 XO17 = XOSM-571 C T E C FREQUENCY STABILITY OPERATING TEMPERATURE (OTR) ENABLE/ DISABLE PACKAGE CODE E = Disable to tristate Tape and reel H = RF7 C = 0.01 % (100 ppm) D = 0.005 % (50 ppm) E = 0.0025 % (25 ppm) T = 0 °C to + 70 °C R = - 40 °C to + 85 °C Bulk A = B04 (XO63, XO62, XO61) C = D06 (XO57, XO37, XO27, XO17) N A 4 0 M OPTION FREQUENCY NA = No additional options 60 = 45/55 symmetry 4M = 4 MHz 40M = 40 MHz 100M = 100 MHz 12M288 = 12 288 MHz Contact factory for all other options M is used as decimal place holder in frequency Example: XO57CTECNA40M PART MARKING Line 1: M28__XXXXX (part number) Line 2: XX.XXXXM (frequency) Line 3: yywwvv (date/factory code) Revision: 26-Apr-13 Document Number: 35059 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000