more than you expect Custom Capabilities Transformers Toroids Finished Magnetic Components Content New Packages........................................ 01 Smart Transformer Selector..................... 02 LTspice Transformer Library..................... 04 LTspice User Tips for the Transformer Library................................. 05 Altium Models......................................... 06 EAGLE Library......................................... 07 Switch Mode Power Supply Topologies Compared.............................. 08 Topology Selection.................................. 11 Safety.................................................... 12 Safety Standards..................................... 13 Wire for Transformers.............................. 14 Power Material Characteristics................. 16 Gap Calculator........................................ 17 WE Are the Solution................................ 18 Transformers Table of Contents........................................................................................................... 19 Transformers................................................................................................................. 20 Toroids Table of Contents........................................................................................................... 97 Toroids.......................................................................................................................... 98 Finished Magnetic Components Table of Contents......................................................................................................... 120 Finished Magnetic Components.................................................................................... 121 www.we-online.com/midcom Transformer Indexes Toroid Indexes Search by Power................................... 144 Search by Application............................ 145 Search by Topology............................... 146 Search by Safety................................... 147 Search by Height.................................. 148 Search by Length.................................. 149 Search by Width.................................... 150 Search by Length.................................. 151 Search by Width.................................... 151 Search by Height.................................. 152 Search by Safety................................... 152 05/16 New Packages Chapter 1: Transformers EP5 6-Terminal, SMD, Horizontal Bobbin: 070-6279 The EP5 package uses a standard EP5 core but can handle higher isolation requirements than the standard EP5 bobbin. This Surface mount package is a perfect solution for small isolated power supplies that require higher creepage and clearance distances with a small overall footprint. The EP5 can be used for diverse markets including telecom, industrial and White goods. Page 52 EPW15 9-Terminal EXT, SMD, Horizontal Bobbin: 070-6384 The EPW15 package is a low profile Surface mount version of the standard EPW15 package. This package is similar in size to EP13 but can provide higher power. The EPW15 is a great solution for compact offline transformers for industrial, lighting, metering and other markets. Page 74 ER9.5S 8-Terminal EXT, SMD, Vertical Bobbin: 070-6310 The ER9.5S package is a low profile, Extended rail version of the standard ER9.5 package. This Surface mount package can be used to design ultra-small isolated power supply transformers. The ER9.5S is well suited for applications requiring higher creepage and clearance and higher isolation. It was developed for the industrial market, but is well suited for a broad range of applications. Page 76 05/16 1 RA R SELEC R T Smart search for all flyback transformers on the website - Discontinuous Mode -NEW! Boundary Mode now with improved handling n Simple search needs only power supply parameters - Input voltage and switching frequency - Output voltages and current n Simplified Searches - NEW! Basic search for fastest results - Expert search for refined results n Finds all parts for your application that will: - Not saturate - Provide acceptable output voltages n Samples available n TO TS Benefits S M ART S Smart Transformer Selector - Release 2 NSFORM E Features n Analyzes transformer in defined application - Voltage levels - Current wave forms Losses & temperature rise n Compare multiple parts at once n Schematic showing how to connect n 3-D view of each part n NEW! Recommends best parts from search results n Samples Available 2 www.we-online.com/midcom 05/16 Enter power supply input and output criteria and click on “Search Now” STEP 3 STEP 2 STEP 1 Easy as 1 n 2 n 3! 05/16 Select transformer of choice from recommended list, or see full results list Review transformer performance in either summary tab or any of the other three, more detailed, tabs 3 LTspice Transformer Library trl) V(c ec) V(s 11V 10V 9V 8V 7V 6V 5V ,pri) V(IN 4V 3V 2V 1V ec) I(Ls 0V -1V 40V 32V 24V 16V 8V 0V -8V -16V ri) I(Lp s 90µ -24V -32V s 80µ -40V -48V s 70µ 9.9A 9.0A µs 8.1A 7.2A a or.r ulat w --- g sim estin er t 60 rm sfo tran DCM B il F s 50µ LTspice IV definition: 6.3A 5.4A s 40µ ic Tsp TC\L 86)\L eIV \lib\E m LTspice IV is a free, high-performance, SPICE simulator software by Linear (x iles mF gra in the industry. o Technology which is widely--- used r C:\P 4.5A 3.6A s 30µ 2.7A 1.8A 0.9A 0.0A “Usable transformer SPICE models for switching power supplies have always been an industry challenge. The Wurth Electronics Midcom LTspice Transformer Library provides transformer models that give realistic results while simulating very quickly.” s 20µ s 10µ A -0.9 0µs Expanse of Library: The library consists of three different LTspice models for over 500 of our power transformers, including designs for lighting and metering applications, PoE and PoE+, isolated DC/DC converters, flyback and offline transformers. All of these parts are currently featured on our website at www.we-online.com/midcom. – Dean Huumala, Product Marketing Manager at Wurth Electronics Midcom Model Options: The Basic Library n Basic model type n Symbols are named with “_B” at the end of the part number n The Basic library netlist is similar to other LTspice transformer models seen in the industry today n Ability to be imported and converted into other SPICE programs The Standard Library n Offers two model types: the Linear and Saturation models. Linear is labeled “_Linear” at the end of the part number and saturation is labeled “_Saturation” n n n 4 The models use the same symbol, but different netlists. The next page explains how to change from where a netlist a symbol reads. Both models simulate very quickly, are very accurate models, and include the same parasitics. The Saturation model includes saturation effects as well, making it more accurate, but runs slightly slower than the Linear model, which simulates about 25% faster than the Saturation model. www.we-online.com/midcom TO REQUEST A CUSTOM MODEL: If you would like to request a custom transformer model, contact your local Wurth Electronics Midcom representative or send a request to: [email protected] 05/16 LTspice User Tips for the Transformer Library Using the Library 1. Download the Library n Go to www.we-online.com/toolbox n Download the file titled Wurth Electronics Midcom LTspice Transformer Library from the Libraries section. n Our main library, the Standard Library, provides fast, usable models that run well in LTspice. n We also offer a Basic Library, which provides LTspice models with a netlist that can be imported and converted into other SPICE programs. To use our models in other SPICE programs, download this library as well. n The zip file can be downloaded and saved anywhere on the hard drive. 2. Install the Files n Open the zipped folder previously downloaded. n It contains folders named “ForTheSymFolder” and “ForTheSubFolder”. n Save the symbol files (.asy extensions in the “ForTheSymFolder”) into the “\sym” folder of the LTC folder structure. n Next save the netlist file (.lib extensions in the “ForTheSubFolder”) to the “\sub” folder in the LTC folder structure. n Once the files are saved in the correct folders, they can be easily accessed from any LTspice schematic. Note: If the LTspice program is open while moving files, close the program and reopen it to refresh. 3. Use the Models n The transformers can be added to a schematic by clicking the Component button on the toolbar after being saved in the proper folders n Edit the component attributes and select which model type to use n Default setting for basic model is the Basic subcircuit n Default setting for our standard models is the Linear subcircuit n To change to the Saturation subcircuit, right click the symbol. There is an attribute called SpiceModel, and its value will be the part number and “_Linear”. – Double-click on that value to display the list of subcircuits for the model. – Select the model’s saturation subcircuit. V(ctrl) 11V 10V 9V 8V 7V V(sec) 6V 5V 4V 3V 2V ri) V(IN,p 1V 0V -1V 40V 32V 24V 16V ) I(Lsec 8V 0V -8V -16V -24V I(Lpri) -32V -40V -48V 9.9A 9.0A 8.1A 7.2A 6.3A 5.4A 4.5A 3.6A 2.7A 1.8A 0.9A 0.0A -0.9A s 0µ 05/16 10µs 20µs 30µs rogr --- C:\P (x am Files 40µs ce \LTspi 86)\LTC 50µs mil IV\lib\E M FB DC 70µs simul sting rmer te transfo 60µs 80µs w ator.ra 5 90µs --- Altium Models available for all Custom Capabilities Catalog Packages All packages in Custom Capabilities Catalog available. Downloadable library includes: Integrated schematic symbols ■ PCB footprints ■ 3D models ■ Embedded web link to package information ■ Over 20 libraries and 90 different packages are available. Use with Altium Designer for Board Designs Schematic capture ■ 3D PCB layout ■Analysis ■ Programmable Design ■ Find the Altium Libraries: “Downloads” tab of the product pages of our website ■ 6 www.we-online.com/midcom 05/16 EAGLE Library Wurth Electronics Midcom's Eagle Library allows Eagle users to concentrate on easier and earlier board design by using our component library, which offers pre-drawn pad layouts and pinouts for preferred, standard, and non-standard package styles. Library includes: n Preferred, standard, and non-standard package styles n Links to datasheets in the device descriptions n SMD and THT packages n Bobbin and Toroid packages Component schematics show windings with specific and recommended pinouts available. Accurate pad layouts with redundant pin labeling for easier placement. The EAGLE library is available through the CadSoft EAGLE site or www.we-online.com/toolbox 05/16 7 Switch Mode Power Supply Topologies Compared The ubiquitous linear power supply of old has been on a steady decline for years, ever since the advent of Switch Mode Power Supplies (SMPS). The clear advantage to SMPS over linear supplies has been size and efficiency, and as the world-wide energy crises looms on the international, commercial and political scene, we have seen the trend to SMPS only accelerate. As a new technology, the high component count of SMPS made the technology more expensive than linear. But with the birth of the electronic age, component costs have dropped so low that the high raw material content of copper and iron in the linear transformer has made the SMPS technology more cost effective. Even with the disadvantages of being more complex and requiring more care to control EMI, the advantages of switch mode power supplies far outweigh linear power supplies in all but a few niche applications. Power Supply Linear SMPS Size Large and Heavy Small and Light Efficiency 30-40% 70-95% Complexity Simple Complex EMI Low Noise Filtering Required Cost High (Due to Material) Low Switching power supplies are made up of a number of different stages. If the input is an AC input, then the input stage needs to include both the input filter and a rectifier to convert to a DC input. DC to DC converters do not need the rectifier. The inverter stage turns around and immediately converts the now DC input back into an AC input by switching the DC input voltage on and off at a much higher frequency than the original AC input. The frequency of operation is often chosen to be in the 20kHz to 150kHz range, which is high enough to be outside the audible range and low enough to keep it outside of the FCC requirements for conducted EMI. After the inverter stage, the output stage rectifies and filters the output. If an isolated design is required, a transformer is placed between the rectifier and output stage. This transformer can be much smaller, lighter and cheaper than the linear power supply transformer, due to the higher switching frequency. When designing a power supply, typically the design criteria favors a switchmode power supply over a linear power supply. When it comes to deciding which SMPS topology to use, the decision can often be much more difficult. Selecting the wrong topology can result in a design project that does not meet your cost targets, efficiency goals or a host of other requirements that you might have. Below we discuss some of the more common topologies and their features. Buck Buck converters are one of the simplest, cheapest and most common topologies. While this topology is not suited for applications where isolation is required, it is ideal as a DC to DC converter used to step-down voltages. Not only can you achieve high efficiency levels, but also high power levels using a buck converter, especially with poly-phase topologies. The down side to buck converters is that the input current is always discontinuous, resulting in higher EMI. However, EMI issues can be addressed with filter components such as chip beads, common mode chokes and filter chokes. The buck topology only requires a single inductor for single-phase applications, and catalog inductors for a wide range of applications are available. In addition, custom inductors can be developed for those special inductance versus current values that are required, as well as for applications requiring extra windings for sensing or supplying power to the controller. Boost The boost topology, like the buck topology, is non-isolating. Unlike the buck topology, the boost steps up the voltage rather than stepping it down. Because the boost topology draws current in a continuous, even manner when operating in continuous conduction mode, it is an ideal choice for Power Factor Correction circuits. Like the buck topology, there are many catalog choices for the inductor used in boost circuits, and where there is a special need, custom inductors are available as well. Between the output stage and the inverter stage is a controller which monitors the output and adjusts the switching action to keep the output at the desired level. Mains Input Rectifier and Input Filter Inverter Switch Output Transformer Output Rectifier and Filter DC Output Controller 8 www.we-online.com/midcom 05/16 Buck-Boost Push-Pull The buck-boost topology can either step the voltage up or down. This topology is particularly useful in battery powered applications, where the input voltage varies over time but has the disadvantage of inverting the output voltage. Another disadvantage to the buckboost topology is that the switch does not have a ground, which complicates the drive circuit. Using only a single inductor like the buck and the boost topologies, the buck-boost inductor and EMI components are readily available. The push-pull topology is essentially a forward converter with two primary windings used to create a dual drive winding. This utilizes the core of the transformer much more efficiently than the flyback or the forward converters. On the other hand, only half the copper is being used at a time, thereby increasing the copper losses significantly in a similar sized transformer. For similar power levels, the push-pull converter will have smaller filters compared to the forward converter. However the advantage that push-pull converters have over flyback and forward converters is that they can be scaled up to higher powers. Switching control can be difficult with push-pull converters, because care has to be taken not to turn on both switches at the same time. Doing so will cause the equal and opposite flux in the transformer, resulting in a low impedance and a very large shoot-through current through the switch, potentially destroying it. The other disadvantage to the push-pull topology is that the switch stresses are very high (2∙VIN), which makes the topology undesirable for 250VAC and PFC applications. SEPIC/Ćuk The SEPIC and Ćuk topologies both use capacitors for energy storage in addition to two inductors. The two inductors can be either separate inductors or a single component in the form of a coupled inductor. Both topologies are similar to the buck-boost topology in that they can step-up or step-down the input voltage, making them ideal for battery applications. The SEPIC has the additional advantage over both the Ćuk and the buck-boost in that its output is non-inverting. An advantage to the SEPIC/Ćuk topologies is that the capacitor can offer some limited isolation. Catalog coupled inductors are available for the SEPIC and Ćuk topologies, and custom inductors are readily available for special needs. Flyback The flyback topology is essentially the buck-boost topology that is isolated by using a transformer as the storage inductor. The transformer not only provides isolation, but by varying the turns ratio, the output voltage can be adjusted. Since a transformer is used, multiple outputs are possible. The flyback is the simplest and most common of the isolated topologies for low-power applications. While they are well suited for high-output voltages, the peak currents are very high, and the topology does not lend itself well to output current above 10A. One advantage of the flyback topology over the other isolated topologies is that many of them require a separate storage inductor. Since the flyback transformer is in reality the storage inductor, no separate inductor is needed. This, coupled with the fact that the rest of the circuitry is simple, makes the flyback topology a cost effective and popular topology. Forward The forward converter is really just a transformer isolated buck converter. Like the flyback topology, the forward converter is best suited for lower power applications. While efficiency is comparable to the flyback, it does have the disadvantage of having an extra inductor on the output and is not well suited for high voltage outputs. The forward converter does have the advantage over the flyback converter when high output currents are required. Since the output current is non-pulsating, it is well suited for applications where the current is in excess of 15A. 05/16 Half-Bridge The half-bridge topology, like push-pull topologies, can be scaled up well to higher power levels and is based on the forward converter topology. This topology also has the same issue of the shootthrough current, if both switches are on at the same time. In order to control this, there needs to be a dead-time between the on-time of each switch. This limits the duty-cycle to about 45%. Beneficially, the half-bridge topology switching stresses are equal to the input voltage and make it much more suited to 250VAC and PFC applications. On the flip side, the output currents are much higher than the push-pull topology, thereby making it less suited for high current outputs. Resonant LLC The resonant LLC topology is a half-bridge topology that uses a resonant technique to reduce the switching losses due to zero voltage switching, even in no-load conditions. This topology scales up well to high power levels and has very low losses in devices that are on at all times. This topology is not as well suited for standby mode power supplies, as the resonant tank circuit needs to be energized continuously. The resonant LLC also has the advantage over both push-pull and half-bridge topologies of being suitable for a wide range of input voltages. The down side to the resonant LLC topology is its complexity and cost. 9 Switch Mode Power Supply Topologies Compared (continued) Non-Isolated Topologies Power Topology Supply Schematic Power Typical Relative Magnetics (Watts) Efficiency Cost Required DC Transfer Function (VOUT/VIN) Maximum Universal Multiple VOUT<VIN VOUT>VIN Practical Input Outputs Range Range Duty Cycle (90-264) VAC Buck 500 85 1 Single Inductor D 0.9 No No Yes No Boost 150 70 1 Single Inductor 1 _____ 1–D 0.9 No No No Yes BuckBoost 150 70 1 Single Inductor –D _____ 1–D 0.9 No No Yes Yes SEPIC 150 75 1.2 Coupled or Two Inductors D _____ 1–D 0.9 No No Yes Yes Ćuk 150 75 1.2 Coupled or Two Inductors –D _____ 1–D 0.9 No No Yes Yes 0.9 Yes Yes Yes Yes Isolated Topologies _______ 150 75 1.5 Transformer Dx ______ TxVout Forward 150 75 1.8 Transformer and Inductor 2Ns ___ xD Np 0.45 Yes Yes Yes Yes PushPull 500 80 1.8 Transformer and Inductor Ns ___ xD Np 0.45 No Yes Yes Yes HalfBridge 500 85 2 Transformer and Inductor Ns ___ xD Np 0.45 Yes Yes Yes Yes 2 Frequency Dependent Transformer Based on Resonant Tank Transfer Function 0.45 Yes Yes Yes Yes Resonant LLC 10 √ DCM Flyback www.we-online.com/midcom 500 90 2xIout xLP 05/16 Topology Selection Topology Selection Isolation Required? YES NO NO Power < 70W? YES Complexity & Cost a Concern? IOUT > 10A? VOUT < VIN Range? YES YES NO NO Buck VIN > 200VDC? IOUT < 5A? VOUT > VIN Range or PFC? YES NO YES NO YES NO NO VOUT > 30VDC? Non-Inverting Output Desired? Boost YES IOUT > 10A? NO YES NO NO YES Half-Bridge 05/16 Push-Pull YES Resonant LLC Flyback Forward Buck-Boost or Ćuk Flyback or SEPIC 11 Safety Functional, Basic, and Reinforced insulation The affect of insulation requirements is significant enough to change the form factor, performance, cost, and of course, reliability of the transformer. In general terms, Functional insulation is the easiest insulation to achieve. It allows for magnet wire to be in contact with other magnet wire and has no creepage or clearance requirements. The insulation strength is tested by a simple dielectric (hipot) test. Both Basic and Reinforced insulation are common to parts subject to offline voltages (85-265VAC). The primary difference between these two types of insulation and Functional insulation is that basic and reinforced require physical separation between windings, solder joints, and cores. These distances are known as creepage and clearance. There are a several methods to achieve distance requirements; multi-section bobbins, encapsulation, margin tape, and extruded insulated wire are the most common. You can imagine certain drawbacks to the special insulation: increased size, reduced coupling, lower efficiency, decreased manufacturing capacity, and limited pin configuration options. The distance requirements and lead isolation are set by specific standards. Reinforced insulation is typically twice that of basic insulation. In some cases, special materials can be used to reduce the distance requirements. In other cases, lead-in routing rules can cause significant manual production processes, especially when pin configuration is fixed. Size Pinout flexibility Efficiency Coupling Manufacturing capacity/ leadtime Cost Safety Dielectric withstand 12 www.we-online.com/midcom Functional Basic/ Reinforced + + + + - + - + - + + Definitions Functional Insulation Insulation that is necessary only for the functioning of the equipment Basic Insulation Insulation applies to hazardous live parts to provide basic protection against electric shock. Supplementary Insulation Insulation used with basic insulation to provide a second level of protection. Double Insulation Insulation comprising both basic insulation and supplementary insulation. Reinforced insulation Single insulation system that provides a degree of protection against electric shock equivalent to double insulation Creepage Distance Shortest distance through air along the surface of an insulation material between two conductive parts Clearance Distance Shortest distance through air between two conductive parts Working Voltage Highest voltage to which the insulation or the component under consideration is, or can be, subjected when the equipment is operating under conditions of normal use 05/16 Safety Standards Standards Applicable to LED Lighting ■ ■ UL1310 • Class 2 Power Units - Specifies the safety requirements for Class 2 power supplies UL8750 • LED Components - Specifies the safety requirements for LED light sources and the components i. ii. Dielectric requirements i. 1. 1000VAC plus twice the maximum rated voltage between: ii. Dielectric requirements Spacing requirement of 0.8mm 1. 1000VAC plus twice the AC (RMS) voltage between: a. The primary circuit and accessible dead parts; and b. The primary and secondary circuit or circuits 2. 500V between a secondary circuit operating at 70V peak or less and accessible dead metal parts a. The primary circuit and accessible dead metal parts; and b. The primary and secondary circuit or circuits 2. 1000VAC plus two times the sum of secondary voltages between secondary windings for units described in 28.3 or 30.2.3 3. 500VAC between a secondary circuit and dead metal parts ■ ■ IEC60950-1 • Information Technology Equipment – Specifies the safety requirements for electronic hardware i. Spacing requirements of 8mm for reinforced 400V ii. Dielectric requirement: 1500- 4500VAC Spacing requirement same as UL8750 EN61347-2-13 • Lamp Control Gear – Specifies safety requirement for DC or AC supplied electronic control gear for LED modules i. Spacing requirements of 3-6mm ii. Dielectric requirement 1. Basic insulation: 2U+1000V 2. Supplementary insulation: 2U+1750V 3. Reinforced insulation: 4U+2750V 05/16 13 Wire for Transformers 9208-00xx: 22AWG through 29AWG 9285-00xx Wire: 30AWG through 40AWG Description PN155 is a single insulated 155°C magnet wire which does not serve as insulation barrier per most standards. When Used Standard single insulated magnet wire is used for all windings which do not require barrier class insulation. This type of wire is typically used on all Functional insulation designs as well as on primary and aux windings where the build or layering is very full as it uses the least amount of winding volume. 9208-0022 Description P180 is a heavy insulated 180°C magnet wire which does not serve as insulation barrier per most standards. When Used Standard heavy insulated magnet wire is used for all windings which do not require barrier class insulation, but do need to meet a higher temperature rating than 155°C. Like the PN155 type wire, this type of wire is typically used on all Functional insulation designs as well as on primary and aux windings. It is often used in place of the single 9283-00xx equivalent as it offers a bit more dielectric strength. Scaled to 2x 9285-0030 9208-0029 Scaled to 2x Scaled to 2x 9285-0040 Scaled to 2x 9209-00xx: 22AWG through 29AWG Description PN155 is a heavy insulated 155°C magnet wire which does not serve as insulation barrier per most standards. 9263-00xx Wire: 22AWG through 34AWG Description Our 9263 wire is a TIW (Triple Insulated Wire) known as TCA3 When Used Standard heavy insulated magnet wire is used for all windings which do not require barrier class insulation. This type of wire is typically used on all Functional insulation designs as well as on primary and aux windings. It is often used in place of the single 9208-00xx equivalent as it offers a bit more dielectric strength. When Used This wire is used on windings which provide Reinforced insulation to other windings. This is the typical wire used for all Reinforced insulation type of designs and also sometimes used to meet very high dielectric isolation requirements and surge requirements. This wire goes down to smaller wire gauges than TEX-E wire and is used sometimes when bobbin winding area does not allow the larger TEX-E wire gauges. 9209-0022 Scaled to 2x 9209-0029 Scaled to 2x Description Our 9239 wire is a TIW (Triple Insulated Wire) known as TEX-E When Used This wire is used on windings which provide Reinforced insulation to other windings. This is the typical wire used for all Reinforced insulation designs and also sometimes used to meet very high dielectric isolation requirements and surge requirements. Scaled to 2x 9239-0832 Scaled to 2x 9262-00xx Wire: 22AWG through 34AWG Description Our 9262 wire is a DIW (Double Insulated Wire) known as TCA2 When Used This wire is used on windings which provide basic insulation to other windings. This is the typical wire used for all basic isolation type designs and also sometimes used to meet very high dielectric isolation requirements and surge requirements. This wire has less insulation and better utilizes the bobbin winding area when compared to TIW wires. Scaled to 2x 9262-0034 9283-00xx Wire: 30AWG through 40AWG 9262-0040 Description P180 is a single insulated 180°C magnet wire which does not serve as an insulation barrier per most standards. When Used Standard single insulated magnet wire is used for all windings which do not require barrier class insulation, but do need to meet a higher temperature rating than 155°C. Like the PN155 type wire, this type of wire is typically used on all Functional insulation designs as well as on primary and aux windings where the build or layering is very full as it uses the least amount of winding volume. 9283-0030 9283-0040 14 Scaled to 2x 9263-0034 9239-08xx: 18AWG through 32AWG 9239-0818 9263-0022 www.we-online.com/midcom Scaled to 2x Scaled to 2x Scaled to 2x Scaled to 2x 05/16 Wire Hints and Tips 9220-0xxx: Litz Wire 1. Instead of using litz wire, consider winding 2, 3 or 4 strands of a small gauge wire at the same time. Description Our 9220 wire is a litz wire. When Used This wire is used when high frequency and high currents lead to high AC copper losses. The many strands of wire used result in much less loss due to the skin and proximity effects of these type of applications. Circular Area (mm2) Mils Part Number Description OD (in.) OD (mm) 9220-0141 Litz 26 x 42 AWG 163 9220-0142 Litz 40 x 42 AWG 250 0.082 0.020 0.51 0.127 0.024 9220-0143 Litz 66 x 42 AWG 0.61 413 0.209 0.031 0.79 9220-0144 9220-0138 Litz 105 x 42 AWG 656 0.333 0.040 1.02 Litz 27 x 40 AWG 259 0.131 0.024 0.61 9220-0113 Litz 40 x 40 AWG 384 0.195 0.030 0.76 9220-0139 Litz 66 x 40 AWG 634 0.321 0.040 1.02 9220-0140 Litz 108 x 40 AWG 1038 0.526 0.050 1.27 9220-0058 Litz 25 x 38 AWG 400 0.203 0.030 0.76 9220-0137 Litz 40 x 38 AWG 640 0.324 0.036 0.91 9220-0070 Litz 66 x 38 AWG 1056 0.535 0.050 1.27 9220-0134 Litz 100 x 38 AWG 1600 0.811 0.061 1.55 9220-0141 9220-0134 2. Use heavy insulation instead of single to fill a partially full bobbin. 3. Use multiple strands of wire instead of a single strand in order to completely fill the winding width. 4. TIW and DIW is typically used on the low turn side of the barrier to minimize build. 5. Take care to route wire over corners with radii rather than sharp bobbin edges to avoid cut through. 6. Take care to avoid perpendicular cross over of individual wires to avoid cut through. 7. Be sure to provide strain relief in termination of wires to avoid wire breakage with bobbin flex. Scaled to 2x Scaled to 2x Wire Type Comparison with Equivalent Copper Cross Sectional Area 9208-0026 Scaled to 20x 9209-0026 Scaled to 20x 9263-0026 Scaled to 20x 9262-0026 Scaled to 20x 9239-0826 Scaled to 20x 9220-0142 Scaled to 20x 05/16 15 Power Material Characteristics Pcv-Bm 80˚C 4791.6648 Characteristics 203.34047 1002.1976 Pcv-Bm 64kHz 80˚C 50.352892 3.476965 253.39411 319.22904 32kHz 1.529639 122.921981E+3 25kHz 49.880293 1.133622 252.75507 91.101196 Core loss Pcv (kW/m3) 100kHz 1E+4 6.123271 600.87782 Initial permeability μi 25˚C 2400 ± 25% Saturation magnetic flux density Bs(mT) 1194A/m 25˚C 100˚C 510 390 Remanence Br(mT) 25˚C 100˚C 110 60 Coercivity Hc(A/m) 25˚C 100˚C 13 6.5 Core loss Pcv(kW/m3) 100kHz 200mT 25˚C 100˚C 120˚C 600 300 400 500kHz 200kHz 1E+2 1E+1 100kHz Curie temperature Tc(˚C) 64kHz Electrical resistivity p(Ω∙m) 6.5 32kHz Density d(kg/m3) 4.8x103 ≥215 25kHz Pcv-Temperature 1E+0 1E+1 1E+2 Pcv - Temperature 1E+3 700 Flux Density (mT) Core loss Pcv (kW/m3) 600 Pcv-Bm 100˚C 300 200 0 0 20 40 60 80 100 120 140 Temperature (°C) 100˚C 100kHz 4.677008 1E+3 1056.6629 Core loss Pcv (kW/m3) μa-Bm 64kHz 2.306808 594.96247 500kHz μa - Bm 200kHz 32kHz 1E+2 1.053128 222.66027 100kHz 25kHz 1.030651 154.6565 1E+1 25kHz 7000 64kHz 6000 32kHz 1E+0 1E+1 1E+2 Flux Density (mT) 1E+3 Amplitude Permeability 1E+4 200kHz 14.465505 1035.2894 400 100 Pcv - Bm 5588.4492 100 kHz 200 mT 500 5000 25kHz 25˚C 4000 3000 2000 1000 0 0 100 200 300 400 500 Flux Density (mT) 16 www.we-online.com/midcom 05/16 Gap Calculator About This tool is an easy way to quickly calculate the gap length once the desired AL value and the package are known. Along with the information on the gap length, this tool also provides a quick access to other useful information, like the minimum and maximum gap length, core and bobbin data and the page reference in our Custom Capabilities Catalog. INDUCTOR DIAGRAM Current Source Using the Gap Calculator Physical Gap TURNS Fringing Flux Effective Path Length 1. Choose the desired package from the Package drop-list. 2. Insert the AL value in the “AL of Core (nH/n2)” field. 3. The calculated gap can be extracted from the “Actual” field. For a feasible gap the resulted value is green marked and if is not feasible it will be red marked. 4. If gap spacers are used on the outer legs, we need to divide the calculated gap by two for the thickness of the gap spacer. more than you expect Custom Capabilities Transformers Toroids Going even further, users can manually modify the core area and the magnetic path length for experimental purposes. Just by choosing another package, the program will reset to default values. Finished Magnetic Compoonents BONUS There is an extra tool,“AWG to mm Converter”, that converts the wire diameter from AWG to millimeter and reverse. Go to www.we-online.com/midcom and click on the Toolbox to download the software. To view a PDF version of our Capabilities Catalog go to www.we-online.com/ midcom and click on the Toolbox. For questions please contact our support at [email protected]. 05/16 17 Are the Solution We partner with the leading IC Manufacturers to provide a total solution for our customers. ct Contra urers act Manuf Our ers m o t s Cu IC rers u t c a f Manu Over 2600 reference design wins in 2015 18 www.we-online.com/midcom 05/16 Transformers 1 Contents Package Size EE13/6/6 EE13/6/6 EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/6 EE16/7/5 EE16/7/5 EE16/8/5 (EF16) EE16/8/5 (EF16) EE16/8/5 (EF16) EE20/10/6 (EF20) EE20/10/6 (EF20) EE20/10/6 (EF20) EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/11 EFD15 EFD15 EFD15 EFD20 EFD20 EFD20 EFD20 EFD20 EFD25 EFD25 EFD25 EFD30 EP5 NEW EP5 EP7 EP7 EP7 EP10 EP10 EP10 EP13 EP13 EP13 EP13 EP13 EP13 EPX7 EPX9 EPC13 EPC13 EPC17 EPC17 EPT18 EPT20 EPW15 NEW EPW15 ER9.5 NEW ER9.5S ER11.5 ER14.5 ER28/14 ER28/14 ER28/17 ER28/17 ERL35 ETD34 ETD39 PQ2016 PQ2620 PQ2625 PQ3220 PQ3230 RM4 RM5 RM6 RM6 RM8 RM10 = Reinforced insulation 05/16 DC-DC Flyback Power Offline Power Level (W) at 100kHz Level (W) at 100kHz Mount 070-6506 16 7 TH-H 070-2860 17 TH-V 070-4849 10 TH-H 070-5662 10 5 TH-H 070-6258 10 5 SMD-H 070-4820 10 SMD-H 070-5449 14 6 TH-H 070-5472 19 10 TH-H 070-5278 23 12 TH-V 070-5420 24 TH-H 070-5280 22 13 TH-H 070-5642 25 15 SMD-H 070-4989 50 TH-H 070-5248 47 TH-V 070-5643 43 27 TH-H 070-2607 97 47 TH-H 070-4846 101 51 TH-V 070-5644 98 73 TH-H 070-5080 127 TH-V 070-2745 14 TH-H 070-5939 14 SMD-H 070-4265 12 SMD-H 070-2609 35 TH-H 070-5981 37 26 TH-H 070-4290 35 SMD-H 070-5899 36 SMD-H 070-5900 38 26 SMD-H 070-2710 70 TH-H 070-6008 68 52 TH-H 070-4476 73 SMD-H 070-5491 102 TH-H 070-4426 1 SMD-H 070-6279 1 SMD-H 070-5801 3 SMD-H 070-2150 3 TH-H 070-4436 3 SMD-H 070-6052 8 SMD-H 070-4410 8 SMD-H 070-2365 8 TH-H 070-5465 14 SMD-H 070-4375 14 SMD-H 070-4300 14 TH-H 070-4370 14 TH-H 070-4482 14 SMD-H 070-4483 14 SMD-H 070-4434 4 SMD-H 070-5103 6 SMD-H 070-5483 8 TH-H 070-4887 8 SMD-H 070-5620 22 TH-H 070-4890 22 SMD-H 070-5743 38 30 SMD-H 070-5669 60 51 TH-H 070-5996 25 12 TH-H 070-6384 25 12 SMD-H 070-6051 2 SMD-V 070-6310 2 SMD-V 070-6058 2 SMD-V 070-4477 5 SMD-V 070-5576 141 73 TH-V 070-4869 136 69 TH-H 070-5565 187 122 TH-V 070-5652 184 116 TH-H 070-5783 343 244 TH-H 070-5455 261 164 TH-H 070-5724 437 304 TH-H 070-5674 42 TH-V 070-6362 81 TH-V 070-5649 120 TH-V 070-5050 151 TH-V 070-4796 311 TH-V 070-5754 6 TH-V 070-2250 10 TH-V 070-5757 19 TH-V 070-5657 19 SMD-V 070-2255 49 TH-V 070-5680 91 TH-V = Basic/supplementary insulation No Bolts = Functional insulation Bobbin Pins Safety Length (mm) Width (mm) Height (mm) 9 10 8 9 9 10 8 10 10 8 9 12 10 10 14 10 10 14 8 8 10 12 8 10 10 12 12 10 12 12 12 6 6 6 6 8 8 8 8 10 10 10 10 12 12 8 8 10 10 10 9 9 10 15 9 8 8 12 12 10 12 10 12 14 14 16 14 12 12 12 12 6 6 6 8 12 12 13.50 14.73 14.70 13.72 13.80 13.72 15.00 17.50 18.50 17.96 20.32 17.78 23.00 22.25 22.20 27.94 27.95 27.05 26.00 16.76 15.75 17.78 21.08 21.50 23.11 23.11 21.50 26.04 26.30 27.03 33.00 6.60 7.00 10.16 10.16 9.78 13.34 13.34 13.34 13.46 13.46 13.97 13.97 13.97 13.97 10.16 10.16 14.60 14.60 19.00 19.20 19.00 22.50 15.70 15.80 10.00 10.00 12.95 16.00 29.84 31.00 29.84 32.00 36.50 39.60 49.00 24.00 29.20 29.20 35.56 35.56 11.44 13.97 17.65 20.07 21.59 26.16 20.00 14.73 16.76 20.45 23.90 20.20 15.75 18.80 16.50 20.30 24.38 26.90 22.00 14.40 25.00 29.21 20.32 32.25 23.50 16.76 22.35 22.35 21.08 29.00 26.10 29.65 33.80 26.67 33.00 32.45 35.56 8.26 9.10 13.36 8.26 9.50 15.24 15.24 11.68 17.75 17.75 13.97 13.97 17.17 17.17 9.14 10.16 14.73 20.92 18.50 23.75 41.70 47.00 22.10 26.50 12.07 14.00 12.85 16.80 24.00 31.00 24.00 39.00 44.00 43.18 41.90 24.00 30.35 30.35 37.34 37.34 11.44 13.97 16.64 21.84 21.59 26.16 14.60 15.24 12.70 10.16 11.00 10.50 18.50 13.31 18.80 14.30 16.00 13.80 17.53 23.24 16.00 21.59 28.58 22.86 29.50 8.89 8.89 8.89 10.80 12.00 10.92 11.43 12.00 13.59 14.75 13.97 14.48 5.59 7.80 8.64 9.78 10.54 11.43 11.56 12.57 12.70 12.70 12.70 12.70 12.70 12.70 12.32 12.70 8.50 8.25 12.50 10.16 12.10 12.00 23.30 13.00 5.97 5.00 6.35 7.62 33.00 25.00 36.00 26.00 28.50 30.48 31.75 18.67 25.90 29.30 24.13 34.29 11.18 11.18 13.21 13.46 17.27 19.05 Page Number 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 19 EE13/6/6 9-Pin EXT, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rails Offline Lighting ■Metering Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1994 17.00 30.30 517.00 070-6506 7.29 2.31 24.03 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 20 www.we-online.com/midcom 05/16 EE13/6/6 10-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional insulation Lighting Metering ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1994 17.00 30.30 517.00 070-2860 7.44 2.49 22.66 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 21 EE13/7/4 (EF12.6) 8-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2300 12.40 29.60 367.04 070-4849 7.49 1.78 20.40 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 22 www.we-online.com/midcom 05/16 EE13/7/4 (EF12.6) 9-Pin EXT, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2300 12.40 29.60 367.04 070-5662 7.49 1.80 20.40 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 23 EE13/7/4 (EF12.6) 9-Terminal EXT, SMD, Horizontal Characteristics ■ ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Reinforced insulation Extended rails Offline Lighting ■Metering Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2300 12.40 29.60 367.04 070-6258 7.49 1.80 20.40 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 24 www.we-online.com/midcom 05/16 EE13/7/4 (EF12.6) 10-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2300 12.40 29.60 367.04 070-4820 7.49 1.80 20.40 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 25 EE13/7/6 8-Pin EXT, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-3045 21.45 30.62 656.70 070-5449 7.49 1.85 24.61 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 26 www.we-online.com/midcom 05/16 EE16/7/5 10-Pin EXT, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2115 18.40 35.50 653.20 070-5472 8.00 2.54 24.00 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 27 EE16/7/5 10-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Reinforced insulation Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2115 18.40 35.50 653.20 070-5278 8.20 2.92 25.25 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 28 www.we-online.com/midcom 05/16 EE16/8/5 (EF16) 8-Pin, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2182 20.10 37.60 755.76 070-5420 10.11 2.39 24.41 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 29 EE16/8/5 (EF16) 9-Pin EXT, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2182 20.10 37.60 755.76 070-5280 9.50 2.34 25.40 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 30 www.we-online.com/midcom 05/16 EE16/8/5 (EF16) 12-Terminal EXT, SMD, Horizontal Characteristics ■ ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: horizontal Reinforced insulation Extended rail Offline Lighting ■Metering ■ Industrial controls Core Data White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2182 20.10 37.60 755.76 070-5642 10.01 2.51 24.38 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 31 EE20/10/6 (EF20) 10-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1945 32.00 46.00 1472.00 070-4989 12.50 3.15 30.40 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 32 www.we-online.com/midcom 05/16 EE20/10/6 (EF20) 10-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional insulation Lighting Metering ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1945 32.00 46.00 1472.00 070-5248 12.50 3.00 30.23 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 33 EE20/10/6 (EF20) 14-Pin EXT, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1945 32.00 46.00 1472.00 070-5643 11.00 3.10 31.39 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 34 www.we-online.com/midcom 05/16 EE25/13/7 (EF25) 10-Pin, THT, Horizontal Characteristics 1 Applications Through-hole ■ Core direction: horizontal ■ Functional & reinforced insulation ■ Core Data Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2039 51.40 57.80 2970.92 070-2607 15.60 3.99 36.27 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 35 EE25/13/7 (EF25) 10-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Functional & reinforced insulation Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2039 51.40 57.80 2970.92 070-4846 16.10 4.01 36.80 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 36 www.we-online.com/midcom 05/16 EE25/13/7 (EF25) 14-Pin EXT, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Lighting ■Metering ■ Industrial controls White goods Telecom ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2039 51.40 57.80 2970.92 070-5644 15.60 4.01 37.21 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 37 EE25/13/11 8-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Functional insulation Lighting Metering ■ DC/DC converter ■ Industrial controls White goods Telecom ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1680 78.40 57.80 4531.52 070-5080 15.88 4.22 43.18 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 38 www.we-online.com/midcom 05/16 EFD15 8-Pin, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■PoE ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2129 15.00 34.00 510.00 070-2745 9.20 1.80 21.01 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 39 EFD15 10-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2129 15.00 34.00 510.00 070-5939 8.97 1.83 19.89 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 40 www.we-online.com/midcom 05/16 EFD15 12-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2129 15.00 34.00 510.00 070-4265 8.89 1.65 20.65 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 41 EFD20 8-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■PoE ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2124 31.00 47.00 1457.00 070-2609 13.40 2.08 28.85 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 42 www.we-online.com/midcom 05/16 EFD20 10-Pin EXT, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Lighting ■Metering ■PoE Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2124 31.00 47.00 1457.00 070-5981 13.40 2.25 31.01 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 43 EFD20 10-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2124 31.00 47.00 1457.00 070-4290 13.61 2.06 27.94 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 44 www.we-online.com/midcom 05/16 EFD20 12-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2124 31.00 47.00 1457.00 070-5899 13.64 2.11 31.20 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 45 EFD20 12-Terminal EXT, SMD, Horizontal Characteristics ■ ■ ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Reinforced insulation Extended rail 12mm max height without cap Offline Lighting ■Metering ■PoE Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2124 31.00 47.00 1457.00 070-5900 13.40 2.25 30.64 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 46 www.we-online.com/midcom 05/16 EFD25 10-Pin, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■PoE ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2305 58.00 57.00 3306.00 070-2710 16.71 2.54 37.26 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 47 EFD25 12-Pin EXT, THT, Horizontal Characteristics ■ ■ ■ ■ Applications Through hole Core direction: horizontal Reinforced insulation Extended rail Offline Lighting ■Metering ■PoE Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2305 58.00 57.00 3306.00 070-6008 16.61 2.50 39.62 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 48 www.we-online.com/midcom 05/16 EFD25 12-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2305 58.00 57.00 3306.00 070-4476 16.70 2.64 39.62 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 49 EFD30 12-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■PoE ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2308 69.00 68.00 4692.00 070-5491 20.50 2.79 45.62 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 50 www.we-online.com/midcom 05/16 EP5 6-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Surface mount Pick & placeable Core direction: horizontal Functional insulation DC/DC converter Industrial controls ■ White goods Core Data DSL Telecom ■CMC ■ ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-1219 1 Applications Digital: 150-1306 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 3.09 9.73 30.07 070-4426 2.90 0.76 7.85 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 51 EP5 6-Terminal, SMD, Horizontal Characteristics NEW ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Basic/supplementary insulation DC/DC converter Industrial controls ■ White goods Core Data ■ ■ ■ DSL Telecom Bobbin Winding Area Core Part Number Power: 150-1219 ■ Digital: 150-1306 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 3.09 9.73 30.07 070-6279 2.90 0.81 7.85 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level kHz 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 52 n/a n/a 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 www.we-online.com/midcom n/a 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 05/16 EP7 6-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Surface mount Pick & placeable Core direction: horizontal Functional insulation DC/DC converter Industrial controls ■ White goods Core Data DSL Telecom ■CMC ■ ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-2365 1 Applications Digital: 150-0341 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 10.30 15.70 161.71 070-5801 3.61 1.24 14.15 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 53 EP7 6-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional insulation DC/DC converter Industrial controls ■ White goods ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Power: 150-2365 DSL Telecom ■CMC ■ Digital: 150-0341 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 10.30 15.70 161.71 070-2150 3.68 1.14 14.20 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 54 www.we-online.com/midcom 05/16 EP7 8-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Surface mount Pick & placeable Core direction: horizontal Basic/supplementary insulation DC/DC converter Industrial controls ■ White goods Core Data DSL Telecom ■CMC ■ ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-2365 1 Applications Digital: 150-0341 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 10.30 15.70 161.71 070-4436 3.86 1.24 14.20 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 55 EP10 8-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation PoE DC/DC converter ■ Industrial controls Core Data ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-2361 DSL Telecom ■CMC ■ Digital: 150-0339 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 11.30 19.20 180.29 070-6052 5.74 2.08 15.06 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 56 www.we-online.com/midcom 05/16 EP10 8-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ ■ Surface mount Pick & placeable Core direction: horizontal Basic/supplementary insulation Built-in shelves ■ ■ ■ ■ Core Data PoE DC/DC converter Industrial controls White goods DSL Telecom ■CMC ■ ■ Bobbin Winding Area Core Part Number Power: 150-2361 1 Applications Digital: 150-0339 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 11.30 19.20 180.29 070-4410 6.05/2.74 2.13 16.23 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 57 EP10 8-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional insulation ■ ■ ■ ■ ■ ■ Core Data DSL Telecom ■CMC ■ ■ Bobbin Winding Area Core Part Number Power: 150-2361 PoE DC/DC converter Industrial controls White goods Digital: 150-0339 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 11.30 19.20 180.29 070-2365 5.84 1.96 15.32 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 58 www.we-online.com/midcom 05/16 EP13 10-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter ■ Industrial controls Core Data White goods DSL ■Telecom ■CMC ■ ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-2363 1 Applications Digital: 150-0899 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 19.50 24.20 471.90 070-5465 7.57 1.85 18.21 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 59 EP13 10-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Basic/supplementary insulation Built-in shelves Lighting Metering ■PoE ■ DC/DC converter ■ Industrial controls Core Data ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-2363 White goods DSL ■Telecom ■CMC ■ Digital: 150-0899 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 19.50 24.20 471.90 070-4375 7.77/4.47 1.91 18.03 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 60 www.we-online.com/midcom 05/16 EP13 10-Pin, THT, Horizontal Characteristics Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■PoE ■ DC/DC converter ■ Industrial controls White goods DSL ■Telecom ■CMC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Power: 150-2363 1 Applications Digital: 150-0899 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 19.50 24.20 471.90 070-4300 7.77 1.91 18.54 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 61 EP13 10-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Basic/supplementary insulation ■ Built-in shelves Lighting Metering ■PoE ■ DC/DC converter ■ Industrial controls ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Power: 150-2363 White goods DSL ■Telecom ■CMC ■ Digital: 150-0899 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 19.50 24.20 471.90 070-4370 7.77/4.47 1.91 18.54 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 62 www.we-online.com/midcom 05/16 EP13 12-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter ■ Industrial controls Core Data White goods DSL ■Telecom ■CMC ■ ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-2363 1 Applications Digital: 150-0899 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 19.50 24.20 471.90 070-4482 7.77 1.91 18.03 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 63 EP13 12-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Basic/supplementary insulation Built-in shelves Lighting Metering ■PoE ■ DC/DC converter ■ Industrial controls Core Data ■ ■ ■ Bobbin Winding Area Core Part Number Power: 150-2363 White goods DSL ■Telecom ■CMC ■ Digital: 150-0899 Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 19.50 24.20 471.90 070-4483 7.77/4.47 1.91 18.03 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 64 www.we-online.com/midcom 05/16 EPX7 8-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: horizontal Basic/supplementary insulation ■ ■ ■ ■ Core Data PoE DC/DC converter Industrial controls White goods DSL Telecom ■CMC ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1152 16.50 15.40 254.10 070-4434 3.23 1.24 19.18 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 65 EPX9 8-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter ■ Industrial controls Core Data White goods DSL ■Telecom ■CMC ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1293 14.50 18.70 271.15 070-5103 5.26 1.30 19.13 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 66 www.we-online.com/midcom 05/16 EPC13 10-Pin, THT, Horizontal Characteristics 1 Applications Through hole Core direction: horizontal ■ Functional insulation Lighting Metering ■PoE ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2883 12.79 28.76 367.80 070-5483 6.81 1.55 21.00 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 67 EPC13 10-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2883 12.79 28.76 367.80 070-4887 6.81 1.57 21.00 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 68 www.we-online.com/midcom 05/16 EPC17 10-Pin, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Functional insulation Lighting Metering ■PoE ■ DC/DC converter Industrial controls White goods ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2884 21.88 38.32 838.30 070-5620 9.60 2.16 29.60 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 69 EPC17 9-Terminal, SMD, Horizontal Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Functional insulation Lighting Metering ■PoE ■ DC/DC converter Core Data Industrial controls White goods ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2884 21.88 38.32 838.30 070-4890 9.60 2.05 25.70 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 70 www.we-online.com/midcom 05/16 EPT18 9-Terminal EXT, SMD, Horizontal Characteristics ■ ■ ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: horizontal Reinforced insulation Extended rail Mounts through PCB for reduced height Core Data ■ ■ Offline Lighting Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2625 41.50 55.50 2303.25 070-5743 18.01 1.50 33.73 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 71 EPT20 10-Pin EXT, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail ■ ■ ■ ■ Core Data Offline Lighting Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2558 42.20 73.70 3110.14 070-5669 26.19 1.60 41.22 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 72 www.we-online.com/midcom 05/16 EPW15 15-Pin EXT, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Reinforced insulation ■ Extended rail Offline Metering ■POE ■ Industrial controls White goods DSL ■Telecom ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2874 26.95 30.61 825.14 070-5996 7.76 2.74 25.10 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 73 EPW15 9-Terminal EXT, SMD, Horizontal Characteristics NEW ■ ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: horizontal Reinforced insulation Extended rail Offline Lighting ■Metering ■PoE Core Data Industrial controls White goods ■DSL ■Telecom ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2874 26.95 30.61 825.14 070-6384 7.76 2.74 20.15 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level kHz 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 74 n/a n/a 22 28 32 37 40 44 47 50 67 77 82 86 89 91 93 94 95 www.we-online.com/midcom 11 14 16 18 20 22 23 25 34 38 41 43 44 45 46 47 47 5 7 8 9 10 11 11 12 16 19 20 21 22 22 22 23 23 05/16 ER9.5 8-Terminal, SMD, Vertical Characteristics ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: vertical Functional insulation ■ ■ Core Data DC/DC converter Industrial controls ■ ■ White goods Telecom Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-1188 8.00 14.20 113.60 070-6051 2.16 1.42 13.97 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 75 ER9.5S 8-Terminal EXT, SMD, Vertical Characteristics NEW ■ ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: vertical Basic/supplementary insulation Extended rail DC/DC converter Industrial controls ■ White goods ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-3018 8.46 13.30 112.30 070-6310 1.90 1.42 13.95 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level kHz 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 76 n/a n/a 1 2 2 2 3 3 3 3 4 5 5 5 6 6 6 6 6 www.we-online.com/midcom 1 1 1 1 1 1 1 2 2 2 3 3 3 3 3 3 3 05/16 ER11.5 12-Terminal, SMD, Vertical Characteristics ■ ■ ■ ■ 1 Applications Surface mount Pick & placeable Core direction: vertical Functional insulation PoE DC/DC converter ■ Industrial controls Core Data ■ ■ ■ ■ White goods Telecom Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2140 11.00 14.70 161.70 070-6058 2.01 1.60 16.33 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 77 ER14.5 12-Terminal, SMD, Vertical Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: vertical Functional insulation PoE DC/DC converter ■ Industrial controls Core Data ■ ■ ■ ■ White goods Telecom Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2340 17.30 19.00 328.70 070-4477 2.01 2.74 18.54 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 78 www.we-online.com/midcom 05/16 ER28/14 10-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional & reinforced insulation Offline Lighting ■ Industrial controls ■ White goods Telecom PFC ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2670 82.10 64.00 5254.40 070-5576 16.61 4.39 38.33 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 79 ER28/14 12-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional & reinforced insulation Offline Lighting ■ DC/DC converter ■ Industrial controls ■ White goods Telecom PFC ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2670 82.10 64.00 5254.40 070-4869 16.21 4.34 38.33 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 80 www.we-online.com/midcom 05/16 ER28/17 10-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional & reinforced insulation Offline Lighting ■ DC/DC converter ■ Industrial controls ■ White goods Telecom PFC ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2504 81.40 75.50 6145.70 070-5565 22.91 4.24 38.63 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 81 ER28/17 12-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional & reinforced insulation Offline Lighting ■ DC/DC converter ■ Industrial controls ■ White goods Telecom PFC ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2504 81.40 75.50 6145.70 070-5652 21.69 4.39 37.64 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 82 www.we-online.com/midcom 05/16 ERL35 14-Pin, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Functional & reinforced insulation Offline Lighting ■ DC/DC converter ■ Industrial controls ■ White goods Telecom PFC ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2171 103.00 92.70 9548.10 070-5783 27.61 5.69 47.78 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 83 ETD34 14-Pin, THT, Horizontal Characteristics Applications Through-hole Core direction: horizontal ■ Functional & reinforced insulation Offline Lighting ■ DC/DC converter ■ Industrial controls ■ White goods Telecom PFC ■Charging ■ Stand-by power ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-0897 97.10 78.60 7632.06 070-5455 21.49 5.74 41.48 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 84 www.we-online.com/midcom 05/16 ETD39 16-Pin, THT, Horizontal Characteristics 1 Applications Through-hole Core direction: horizontal ■ Functional and reinforced insulation Offline Lighting ■Metering ■PoE ■ DC/DC converter Industrial controls White goods ■Telecom ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2669 123.00 92.20 10770.00 070-5724 26.30 6.80 47.75 Perimeter Dimensions & Footprint Build Width Recommended Pinout Power Level 05/16 85 PQ2016 14-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Functional insulation Lighting DC/DC converter ■ Industrial controls White goods Telecom ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-0240 62.00 37.40 2318.80 070-5674 7.90 3.12 34.54 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 86 www.we-online.com/midcom 05/16 PQ2620 12-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional insulation Lighting DC/DC converter ■ Industrial controls White goods Telecom ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-0693 119.00 46.30 5509.70 070-6362 8.99 3.76 44.58 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 87 PQ2625 12-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Functional insulation Lighting DC/DC converter ■ Industrial controls White goods Telecom ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2239 118.00 55.50 6549.00 070-5649 13.59 3.71 44.58 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 88 www.we-online.com/midcom 05/16 PQ3220 12-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional insulation Lighting DC/DC converter ■ Industrial controls White goods Telecom ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2449 169.00 55.90 9447.10 070-5050 9.09 5.18 50.27 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 89 PQ3230 12-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Functional insulation Lighting DC/DC converter ■ Industrial controls White goods Telecom ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2411 167.00 74.70 12474.90 070-4796 18.69 5.26 50.27 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 90 www.we-online.com/midcom 05/16 RM4 6-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional insulation Lighting Metering ■ DC/DC converter ■ Industrial controls White goods Telecom ■CMC ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2620 10.80 20.60 222.48 070-5754 5.74 1.50 15.06 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 91 RM5 6-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Functional insulation Lighting Metering ■ DC/DC converter ■ Industrial controls White goods Telecom ■CMC ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2378 21.00 21.40 449.40 070-2250 4.85 1.98 18.62 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 92 www.we-online.com/midcom 05/16 RM6 6-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional insulation Lighting Metering ■ DC/DC converter ■ Industrial controls White goods Telecom ■CMC ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2622 31.00 27.00 837.00 070-5757 6.40 2.36 23.24 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 93 RM6 8-Terminal, SMD, Vertical Characteristics ■ ■ ■ ■ Applications Surface mount Pick & placeable Core direction: vertical Functional insulation Lighting Metering ■ DC/DC converter ■ Industrial controls Core Data White goods Telecom ■CMC ■PFC ■ ■ ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2622 31.00 27.00 837.00 070-5657 6.40 2.41 23.39 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 94 www.we-online.com/midcom 05/16 RM8 12-Pin, THT, Vertical Characteristics 1 Applications Through-hole Core direction: vertical ■ Functional insulation Lighting Metering ■ DC/DC converter ■ Industrial controls White goods Telecom ■CMC ■PFC ■ ■ ■ ■ ■ ■ Core Data Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2623 52.00 35.10 1825.20 070-2255 9.19 3.43 30.89 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 05/16 95 RM10 12-Pin, THT, Vertical Characteristics Applications Through-hole Core direction: vertical ■ Functional insulation ■ ■ ■ ■ ■ ■ Core Data Lighting DC/DC converter Industrial controls White goods Telecom CMC ■PFC ■ ■ Bobbin Winding Area Core Part Number Area (Ae) (mm2) Length (mm) Volume (mm3) Bobbin Part Number Width (mm) Build (mm) Perimeter (mm) 150-2624 90.00 44.00 3960.00 070-5680 10.49 4.29 38.63 Dimensions & Footprint Perimeter Width Build Recommended Pinout Power Level 96 www.we-online.com/midcom 05/16 Toroids Contents Package Size TOR-4P-HT2-SFTY TOR-4P-HT2.2-SFTY TOR-4P-HT2.5-SFTY TOR-4P-HT3.4-SFTY TOR-4P-HT2 TOR-4P-HT2.2 TOR-4P-HT2.5 TOR-4P-HT3 TOR-4P-HT3.3 TOR-4P-HT4.1 TOR-4P-HT4.7 TOR-4P-HT6.4 TOR-6P-HT2.5 TOR-6P-HT3.6 TOR-6P-HT4 TOR-6P-HT6.4-SFTY TOR-6P-HT7.6-SFTY TOR-8P-HT4 TOR-8P-HT4.4 TOR-8P-HT5.3 TOR-8P-HT7.6 TOR-16P-HT6.5 = Reinforced insulation 05/16 No. Terminals Header Mount Terminal Type Safety Length (mm) Width (mm) Height (mm) Page Number 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 8 8 8 8 16 250-0511 250-0989 250-0581 250-0997 250-0889 250-0841 250-1013 250-0973 250-1009 250-0621 250-0608 250-0522 250-0528 250-0593 250-1109 250-1002 250-1123 250-0626 250-0912 250-0482 250-0931 250-0592 SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD Plastic Metal Plastic Metal Plastic Metal Plastic Plastic Plastic Plastic Metal Metal Plastic Plastic Metal Metal Metal Metal Metal Plastic Plastic Metal 4.4 6.1 4.4 4.8 5.9 5.3 6.6 5.9 8.3 6.3 5.5 9.0 6.6 6.7 6.7 6.2 9.1 5.3 6.1 9.0 9.0 11.6 9.1 9.0 9.1 9.5 8.3 5.8 8.9 8.3 8.3 8.9 9.6 10.2 8.9 9.0 10.5 16.3 13.0 8.3 9.7 8.8 8.6 9.4 2.0 2.2 2.5 3.4 2.0 2.4 2.5 3.0 3.3 4.1 4.8 6.6 2.5 3.6 4.2 6.4 7.6 4.1 5.0 5.3 7.6 6.5 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 = Basic/supplementary insulation 2 No Bolts = Functional insulation 97 TOR-4P-HT2-SFTY 4-Terminal, SMD Characteristics ■ ■ ■ ■ Applications Basic/supplementary insulation Extended rail Isolation voltage: 3000V Terminal type: plastic Analog modem Gate drive ■ High voltage isolation ■LAN ■ Power line communication ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Rail Length (mm) Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0511 1.65 0.61 7.19 4.37 4.00 1.00 Dimensions & Footprint 98 www.we-online.com/midcom 05/16 TOR-4P-HT2.2-SFTY 4-Terminal, SMD Characteristics ■ ■ ■ ■ Applications Basic/supplementary insulation Extended rail Isolation voltage: 3000V Terminal type: plastic Analog modem Gate drive ■ High voltage isolation ■LAN ■ Power line communication ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Rail Length (mm) Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0989 1.65 0.92 9.35 8.63 4.80 1.00 Dimensions & Footprint 05/16 99 TOR-4P-HT2.5-SFTY 4-Terminal, SMD Characteristics ■ ■ ■ ■ Applications Basic/supplementary insulation Extended rail Up to 6000V surge capability Terminal type: plastic ■ CMC Gate drive Inductor ■LAN ■ Power line communication ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Rail Length (mm) Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0581 1.65 0.81 7.59 6.12 4.00 1.00 Dimensions & Footprint 100 www.we-online.com/midcom 05/16 TOR-4P-HT3.4-SFTY 4-Terminal, SMD Characteristics ■ ■ ■ ■ Applications Basic/supplementary insulation Extended rail Isolation voltage: 3000V Terminal type: metal CMC Gate drive ■ High voltage isolation ■Inductor ■LAN ■ Power line communication ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Rail Length (mm) Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0997 1.35 0.81 7.59 6.12 3.80 1.00 Dimensions & Footprint 05/16 101 TOR-4P-HT2 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0889 1.00 9.71 9.66 5.26 1.00 Dimensions & Footprint 102 www.we-online.com/midcom 05/16 TOR-4P-HT2.2 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0841 0.61 7.19 4.37 3.60 1.00 Dimensions & Footprint 05/16 103 TOR-4P-HT2.5 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-1013 1.24 9.27 11.45 5.00 1.00 Dimensions & Footprint 104 www.we-online.com/midcom 05/16 TOR-4P-HT3 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0973 2.31 9.71 22.38 5.00 1.00 Dimensions & Footprint 05/16 105 TOR-4P-HT3.3 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-1009 2.23 13.90 30.97 6.70 1.00 Dimensions & Footprint 106 www.we-online.com/midcom 05/16 TOR-4P-HT4.1 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0621 2.10 8.18 17.15 4.80 1.00 Dimensions & Footprint 05/16 107 TOR-4P-HT4.7 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0608 1.90 9.27 17.61 4.80 1.00 Dimensions & Footprint 108 www.we-online.com/midcom 05/16 TOR-4P-HT6.4 4-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0522 4.50 14.14 63.62 6.90 1.00 Dimensions & Footprint 05/16 109 TOR-6P-HT2.5 6-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0528 0.88 10.37 9.12 5.00 1.00 Dimensions & Footprint 110 www.we-online.com/midcom 05/16 TOR-6P-HT3.6 6-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0593 2.16 9.71 20.96 5.00 1.00 Dimensions & Footprint 05/16 111 TOR-6P-HT4 6-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 2500V Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-1109 1.73 11.15 19.24 4.80 1.00 Dimensions & Footprint 112 www.we-online.com/midcom 05/16 TOR-6P-HT6.4-SFTY 6-Terminal, SMD Characteristics Applications Reinforced insulation Isolation voltage: 8000V ■ Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-1002 2.00 9.18 18.36 4.40 1.00 Dimensions & Footprint 05/16 113 TOR-6P-HT7.6-SFTY 6-Terminal, SMD Characteristics ■ ■ ■ ■ Applications Reinforced isolation Extended rail Isolation voltage: 5000V Terminal type: metal CMC Gate drive ■Inductor ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Rail Length (mm) Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-1123 8.00 2.00 12.00 24.00 5.80 1.00 Dimensions & Footprint 114 www.we-online.com/midcom 05/16 TOR-8P-HT4 8-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0626 2.16 9.71 20.96 4.50 1.00 Dimensions & Footprint 05/16 115 TOR-8P-HT4.4 8-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0912 3.20 10.52 33.65 5.00 1.00 Dimensions & Footprint 116 www.we-online.com/midcom 05/16 TOR-8P-HT5.3 8-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0482 2.16 9.71 20.96 4.70 1.00 Dimensions & Footprint 05/16 117 TOR-8P-HT7.6 8-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: plastic CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0931 4.49 13.90 62.40 6.80 1.00 Dimensions & Footprint 118 www.we-online.com/midcom 05/16 TOR-16P-HT6.5 16-Terminal, SMD Characteristics ■ ■ Applications Isolation voltage: 1500V Terminal type: metal CMC Gate drive ■Inductor ■LAN ■ Signal isolation ■Telecom ■ ■ Design Data 2 Recommended Pinout Header Core Area (mm2) Path Length (mm) Volume (mm3) Max Finished OD (mm) Minimum ID (mm) 250-0592 2.16 9.96 21.47 4.60 1.00 Dimensions & Footprint 05/16 119 Finished Magnetic Components Contents 120 Title Description MID-MHC MID-D11 MID-DSLBCM MID-DC16EU MID-DC16US MID-ILTFLY MID-IMAXFLY MID-IMAXPP MID-ITIFBK MID-ITIPP MID-OL16 MID-OLEE MID-OLEFD MID-OLEFD MID-PLN MID-PLC MID-PoE MID-T8T MID-TIB Offline Metering Transformers with High Creepage and Clearance Dual Coil - Common Mode Chokes xDSL Transformer for Broadcom’s BCM65x00 Vectoring CO Chipset Family Dual Common and Differential Mode Chokes for Power Lines Common Mode Line Chokes Transformers for Linear Technology Isolated Flyback Converters Micro PLC Transformer for Maxim Integrated Universal Input System Board Isolated DC/DC Push-Pull Transformers for Maxim’s MAX258, MAX13253 and MAX13256 Drivers Low-Profile Transformers for Texas Instruments Fly-BuckTM for Industrial Applications Transformers for Texas Instruments Push-Pull Driver for Isolated Power Supplies Surface Mount Offline EE16 Transformers EE Package Style Transformers for AC/DC Converters THT EFD Transformers for AC/DC converters SMD EFD Transformers for AC/DC converters Planar Transformers - 250W PLC Transformer for Texas Instruments Power Over Ethernet Transformers T8 Transformers for LED Tube Lighting Isolated Buck Transformers for Telecom Applications www.we-online.com/midcom Page Number 121 122 123 124 126 128 130 131 132 133 134 135 136 137 138 140 141 142 143 05/16 MID-MHC Offline Metering Transformers with High Creepage and Clearance Applications Characteristics ■ Excellent noise performance and high creepage and clearance with a relatively small footprint ■ Smart metering ■ 30% smaller footprint than equivalent EE16 package ■ Offline switching power ■ Single, dual or triple outputs ■ White goods ■ Self-shielding package and wide input voltage range ■ Data concentrators ■ EPW15C package meets up to 10kV surge ■ Smart grid ■ Industrial EWP15C package meets primary-to-secondary creepage and clearance up to 14mm with three isolated outputs. It also meets secondary-to-secondary creepage and clearance up to 8.5mm. ■ ■ EPW15S package meets up to 5.5mm of primary to secondary creepage and clearance. ■ Reinforced insulation ■ Isolation voltage: up to 4000VAC at 1 second ■ EPW15C LxWxH (mm): 15.7 x 22.1 x 23.3 ■ EPW15S LxWxH (mm): 15.8 x 26.5 x 12.7 ■ Parts using EPW15S package meet IEC61010-1 standard ■ Operating temp: -40°C to 125°C Applications requiring 8-10kV surge compliance ■ 3 Estimated Maximum Power Electrical Properties Order Code Package Size Ui (VAC) UO1 (V) I01 (A) UO2 (V) IO2 (A) UO3 (V) IO3 (A) ISAT (A) NPRI: NSEC : NAUX 750817100 EPW15C 85-480 3.3 3.00 - - - - 18 1.41 0.76 30 : 1 : 4.75 68-120 4000 750817135 EPW15C 85-480 12.0 1.05 - - - - 18 1.23 0.70 9.09 : 1 : 1.45 68-120 4000 750817500 EPW15C 85-480 3.3 0.90 12 0.50 - - 18 1.65 0.43 29.33 : 1 : 3.33 : 5 60-190 4000 750817510 EPW15C 85-480 6.0 0.95 18 0.20 - - 18 1.50 0.58 17 : 1 : 2.83 : 2.83 68-155 4000 750817821 EPW15C 85-480 3.3 0.35 6 0.22 18 0.20 18 2.42 0.27 29.33 : 1 : 1.67 : 5 : 5 68-240 4000 750817822 EPW15C 85-480 3.3 0.35 6 0.22 18 0.20 18 2.42 0.26 29.33 : 1 : 1.67 : 5 : 5 68-240 4000 750817112 EPW15S 85-480 5.0 2.80 - - - - 18 1.11 0.90 20.33 : 1 : 3.33 65 3000 750817139 EPW15S 85-480 12.0 1.20 - - - - 18 1.14 0.50 9 : 1 : 1.5 65 3000 7508171310 EPW15S 85-480 15.0 0.80 - - - - 18 1.38 0.50 7.14 : 1 : 1.21 65 3000 750817038 EPW15S 85-480 12.0 0.60 5 0.60 - - 18 1.58 0.56 21.6 : 2.4 : 1 : 3.6 65 3000 750817039 EPW15S 85-480 18.0 0.50 6 0.30 - - 18 1.50 0.50 17 : 2.83 : 1 : 2.83 65 3000 05/16 UAUX (V) L (mH) fswitch (kHz) UT (VAC) 121 MID-D11 Dual Coil - Common Mode Chokes Applications Characteristics ■ Dielectric rating: 1500VAC ■ LED lighting ■ High differential inductance ■ CCFL lighting ■ Extremely compact design ■ Offline switching power ■ Reduces number of components ■ ■ Operating temp: -40°C to 125°C ■ Max LxWxH (mm): 15.75 x 8.71 x 16.30 ■ Filtering on device with unstable ground ■ Package size: EE11/6/3 ■ Power line input and output filters ■ Designed to meet UL1993 for 177VAC (250V peak) at less than 50W ■ Power electronics ■ Electronic ballasts ■ White goods ■ Power tools Suppression of both common and differential mode noise Electrical Properties Order Code L (mH) LS (μH) IR (A) Isat (A) RDC (Ω) UT (VAC) fres (MHz) n 750311650 45.0 4000 0.18 0.20 10.05 750311861 2.5 300 0.76 0.80 0.70 1875 300 1:1 1875 1500 750311895 6.0 700 0.45 0.50 1:1 1.60 1875 850 750311896 10.0 1100 0.37 1:1 0.35 2.50 1875 800 750311897 24.0 2500 1:1 0.24 0.25 6.30 1875 440 750311898 57.0 1:1 6500 0.16 0.15 15.70 1875 280 1:1 750311899 140.0 1850 0.09 0.10 39.00 1875 190 1:1 Insertion loss [dB] Common Mode and Differential Mode Attenuation Frequency [MHz] 122 www.we-online.com/midcom 05/16 MID-DSLBCM xDSL Transformer for Broadcom’s BCM65x00 Vectoring CO Chipset Family Applications Characteristics ■ Leakage Inductance: 800nH max ■ VDSL/ADSL2+ central office applications ■ THD: -70dB max ■ Broadband access equipment ■ LCL: 30dB min at 30MHz ■ ■ Sec. Distributed Capacitance: 8pF ■ Functional insulation ■ Isolation voltage: 1875VAC at 1 second ■ Designed to meet IEC/UL60950-1 Approved by Broadcom for use with vectoring class H line driver Full VDSL2/ADSL2+ bandwidth range up to 30MHz ■ 3 Electrical Properties Order Code Package Size Mount Pins L (mH) NLINE : NDEVICE UT (VAC) xDSL Type Annex CO/CPE 750510572 EPX6 SMD 8 0.43 1.4 : 1 1875 VDSL2 A CO 05/16 123 MID-DC16EU Dual Common and Differential Mode Chokes for Power Lines Applications Characteristics ■ Common and differential mode suppression ■ Lead free and RoHS compliant ■ LED lighting ■ High differential mode inductance ■ Operating temp: -40°C to 125°C ■ CCFL lighting ■ Extremely compact design ■ Designed to meet ■ Offline switching power ■ Reduces components needed - IEC60398-2 for 250VACRMS or VDC ■ Filtering on device with unstable ground ■ Small PCB footprint - UL1283 for 300VRMS (424.3VPEAK) ■ Power line input and output filters ■ Isolation voltage: 3125VAC at 1 second - UL1993 for 347VACRMS or VDC ■ Power electronics ■ Electronic ballasts ■ White goods ■ Power tools Electrical Properties Order Code LTYP (mH) LLKG-TYP (mH) IR (A) ISAT (A) RDC max (Ω) 750314396 12 0.70 0.90 2.20 0.671 750314397 22 1.06 0.70 1.84 1.001 750314398 30 1.50 0.58 1.55 1.463 750314399 56 2.65 0.44 1.19 750314400 91 4.12 750314401 150 6.45 0.27 0.75 DC16EU 2.640 0.35 0.95 Temperature Rise 4.048 vs. Rated Current 6.347 Temperature Rise for Rated Current 100 750314396 750314397 750314398 80 Temperature (°C) 750314399 750314400 750314401 60 40 20 0 0 200 400 600 800 1000 1200 1400 Current (mA) DC current through both windings 124 www.we-online.com/midcom 05/16 MID-DC16EU Dual Common and Differential Mode Chokes for Power Lines Impedance Common Mode Impedance Common Mode 10,000,000 750314401 750314400 1,000,000 750314399 Impedance (Ω) 100,000 750314398 750314397 10,000 750314396 1,000 100 10 1 0.01 0.1 1 10 100 3 Frequency (MHz) Impedance Differential Mode 1,000,000 750314401 750314400 100,000 750314399 750314398 Impedance (Ω) 10,000 750314397 750314396 1,000 100 10 1 0.01 0.1 1 10 100 Frequency (MHz) 05/16 125 MID-DC16US Common Mode Line Chokes Applications Characteristics ■ Common and differential mode suppression ■ LED lighting ■ High differential mode inductance ■ CCFL lighting ■ Extremely compact design ■ Offline switching power ■ Reduces components needed ■ Filtering on device with unstable ground ■ Small PCB footprint ■ Power line input and output filters ■ Isolation voltage: 1875VAC at 1 second ■ Power electronics ■ Operating temp: -40°C to 125°C ■ Electronics ballasts ■ Designed to meet UL1993 for 347VACRMS or VDC ■ White goods ■ Designed to meet UL insulation system M7-130(B) E106391 ■ Power tools Electrical Properties Part Number L (mH) LS (mH) IR (A) 750341632 3.3 0.09 2.00 750341633 6.8 0.20 1.30 750341634 10.0 0.30 1.00 750341635 15.0 0.50 0.85 750341636 20.0 0.58 750341637 25.0 750341638 Isat (A) RDC (Ω) Max LxWxH (mm) 5.0 0.190 13.97 x 22.86 x 14.86 3.5 0.340 13.97 x 22.86 x 14.86 3.0 0.510 13.97 x 22.86 x 14.86 2.8 0.780 13.97 x 22.86 x 14.86 0.78 2.5 0.950 13.97 x 22.86 x 14.86 0.65 0.65 2.0 1.350 13.97 x 22.86 x 14.86 30.0 0.85 0.60 1.5 1.450 13.97 x 22.86 x 14.86 750341780 42.0 1.00 0.50 1.5 2.130 13.97 x 22.86 x 14.86 750341781 70.0 2.00 0.38 1.0 3.330 13.97 x 22.86 x 14.86 750314976 3.3 0.09 2.00 5.0 0.180 13.97 x 22.86 x 14 750314977 6.8 0.20 1.30 3.5 0.345 13.97 x 22.86 x 14 750314978 10.0 0.30 1.00 3.0 0.494 13.97 x 22.86 x 14 750314979 15.0 0.50 0.85 2.7 0.752 13.97 x 22.86 x 14 750314980 18.0 0.54 0.80 2.5 0.807 13.97 x 22.86 x 14 750314981 25.0 0.65 0.65 2.0 1.240 13.97 x 22.86 x 14 IR: The heating current which causes a temperature rise of 40°C without heat sinking. ISAT: The current which causes 20% roll off from the inductance at no DC. The DCR specifications are for a single winding. 126 www.we-online.com/midcom 05/16 MID-DC16US Common Mode Line Chokes Impedance (Ω) 750341633 750341634 Frequency(Hz) 750341633 Frequency(Hz) 10000 466.886 10000 10174.194 474.771 10174.194 DC16US Common Mode Impedance 10351.422 482.221 10351.422 10531.737 490.469 10531.737 10715.193 498.66 10715.193 10901.845 506.85 10901.845 11091.748 516.131 11091.748 11284.959 524.091 11284.959 11481.536 534.32 11481.536 11681.537 542.087 11681.537 11885.022 551.972 11885.022 12092.052 561.018 12092.052 12302.688 571.029 12302.688 12516.993 580.568 12516.993 12735.031 591.109 12735.031 12956.867 600.476 12956.867 13182.567 610.69 13182.567 13412.199 621.327 13412.199 13645.831 631.859 13645.831 13883.533 642.706 13883.533 14125.375 653.834 14125.375 14371.431 664.435 14371.431 14621.772 675.28 14621.772 14876.474 687.486 14876.474 15135.612 699.153 15135.612 15399.265 711.48 15399.265 15667.511 722.981 15667.511 15940.429 736.287 15940.429 16218.101 749.171 16218.101 16500.61 761.928 16500.61 16788.04 773.72 16788.04 17080.477 787.905 17080.477 0.1 1 10 17378.008 800.079 17378.008 Frequency (MHz) 17680.722 815.116 17680.722 17988.709 829.047 17988.709 18302.061 843.512 18302.061 18620.871 858.383 18620.871 18945.235 872.005 18945.235 19275.249 887.989 19275.249 19611.012 902.8 19611.012 19952.623 918.747 19952.623 20300.185 935.108 20300.185 20653.802 950.305 20653.802 750341634 633.362 644.468 653.481 665.916 677.012 688.278 700.437 711.598 724.155 737.51 749.577 761.553 775.223 788.164 802.114 815.771 831.161 843.773 858.249 873.664 888.865 903.285 919.328 933.89 950.522 965.722 983.475 1001.43 1018.11 1035.27 1053.8 1072.04 1090.75 1109.03 1127.22 1148.37 1166.47 1187.77 1208.93 1228.19 1249.23 1271.22 1294.25 100 750341635_1 Frequency(Hz) 10000 10174.194 10351.422 10531.737 750341781 10715.193 10901.845 750341780 11091.748 750341638 11284.959 11481.536 750341637 11681.537 11885.022 750341636 12092.052 750341635 12302.688 12516.993 750341634 12735.031 750341633 12956.867 13182.567 750341632 13412.199 13645.831 13883.533 14125.375 14371.431 14621.772 14876.474 15135.612 15399.265 15667.511 15940.429 16218.101 16500.61 16788.04 17080.477 17378.008 17680.722 17988.709 18302.061 18620.871 18945.235 19275.249 19611.012 19952.623 20300.185 20653.802 750341635 960.643 977.026 993.707 1010.25 1026.44 1046.05 1061.76 1081.94 1098.92 1117.71 1137.34 1153.93 1176.37 1195.25 1216.66 1237.42 1258.7 1279.28 1300.43 1323.61 1347.19 1371.18 1393.65 1417.22 1441.32 1466.4 1489.98 1514.93 1543.9 1570.26 1598.43 1625.19 1653.68 1680.75 1712.25 1740.51 1772.64 1802.47 1831.49 1865.42 1894.8 1928.88 1963.07 750314976 Frequency(Hz) 750314976 1.00E+04 2.52E+02 1.03E+04 2.60E+02 1.06E+04 2.68E+02 1.10E+04 2.76E+02 1.13E+04 2.84E+02 1,000,000 1.16E+04 2.92E+02 1.19E+04 2.99E+02 1.22E+04 3.07E+02 1.26E+04 3.15E+02 1.29E+04 3.23E+02 100,000 1.32E+04 3.31E+02 1.35E+04 3.38E+02 1.39E+04 3.48E+02 1.44E+04 3.59E+02 10,000 1.48E+04 3.69E+02 1.52E+04 3.80E+02 1.57E+04 3.91E+02 1.61E+04 4.02E+02 1.66E+04 4.13E+02 1,000 1.70E+04 4.24E+02 1.75E+04 4.35E+02 1.79E+04 4.46E+02 1.84E+04 4.57E+02 1.88E+04100 4.67E+02 1.93E+04 4.80E+02 2.00E+04 4.95E+02 2.06E+04 5.10E+02 2.12E+04 10 5.26E+02 2.18E+04 5.41E+02 2.25E+04 5.56E+02 2.31E+04 5.71E+02 2.37E+04 5.86E+02 2.43E+04 1 6.02E+02 2.49E+04 0.016.17E+02 2.56E+04 6.32E+02 2.62E+04 6.47E+02 2.69E+04 6.65E+02 2.78E+04 6.86E+02 2.86E+04 7.07E+02 2.95E+04 7.29E+02 3.04E+04 7.50E+02 3.12E+04 7.72E+02 3.21E+04 7.93E+02 3.30E+04 8.14E+02 750314977 750314978 Frequency(Hz) 750314977 Frequency(Hz) 1.00E+04 4.98E+02 1.00E+04 1.03E+04 5.14E+02 1.03E+04 1.06E+04 5.30E+02 1.06E+04 1.10E+04 5.45E+02 1.10E+04 DC16US 14mm Common Mode Impedance 1.13E+04 5.61E+02 1.13E+04 1.16E+04 5.78E+02 1.16E+04 1.19E+04 5.92E+02 1.19E+04 1.22E+04 6.08E+02 1.22E+04 1.26E+04 6.24E+02 1.26E+04 1.29E+04 6.39E+02 1.29E+04 1.32E+04 6.55E+02 1.32E+04 1.35E+04 6.71E+02 1.35E+04 1.39E+04 6.89E+02 1.39E+04 1.44E+04 7.11E+02 1.44E+04 1.48E+04 7.33E+02 1.48E+04 1.52E+04 7.55E+02 1.52E+04 1.57E+04 7.76E+02 1.57E+04 1.61E+04 7.98E+02 1.61E+04 1.66E+04 8.20E+02 1.66E+04 1.70E+04 8.42E+02 1.70E+04 1.75E+04 8.64E+02 1.75E+04 1.79E+04 8.86E+02 1.79E+04 1.84E+04 9.08E+02 1.84E+04 1.88E+04 9.30E+02 1.88E+04 1.93E+04 9.55E+02 1.93E+04 2.00E+04 9.86E+02 2.00E+04 2.06E+04 1.02E+03 2.06E+04 2.12E+04 1.05E+03 2.12E+04 2.18E+04 1.08E+03 2.18E+04 2.25E+04 1.11E+03 2.25E+04 2.31E+04 1.14E+03 2.31E+04 2.37E+04 1.17E+03 2.37E+04 2.43E+04 1.20E+03 2.43E+04 1.23E+03 2.49E+04 0.1 2.49E+04 1 10 2.56E+04 1.26E+03 2.56E+04 Frequency (MHz) 2.62E+04 1.29E+03 2.62E+04 2.69E+04 1.33E+03 2.69E+04 2.78E+04 1.37E+03 2.78E+04 2.86E+04 1.41E+03 2.86E+04 2.95E+04 1.46E+03 2.95E+04 3.04E+04 1.50E+03 3.04E+04 3.12E+04 1.54E+03 3.12E+04 3.21E+04 1.59E+03 3.21E+04 3.30E+04 1.63E+03 3.30E+04 DC16US 14mm Common Mode Impedance Impedance (Ω) DC16US Common Mode Impedance 750341632 Frequency(Hz) 750341632 10000 219.993 10174.194 223.927 10351.422 227.422 10531.737 1,000,000 231.538 10715.193 235.247 10901.845 239.322 11091.748 242.96 11284.959 247.657 100,000 251.529 11481.536 11681.537 255.789 11885.022 259.942 12092.052 264.601 12302.688 10,000 269.485 12516.993 273.643 12735.031 277.997 12956.867 283.11 13182.567 287.287 1,000 292.267 13412.199 13645.831 297.31 13883.533 302.292 14125.375 307.424 14371.431100 312.408 14621.772 318.276 14876.474 323.206 15135.612 328.979 15399.265 10 334.248 15667.511 340.036 15940.429 345.29 16218.101 351.698 16500.61 357.486 16788.04 1 363.668 17080.477 0.01369.549 17378.008 376.214 17680.722 382.499 17988.709 389.235 18302.061 395.818 18620.871 402.676 18945.235 409.528 19275.249 416.633 19611.012 423.84 19952.623 431.222 20300.185 438.492 20653.802 445.736 750314978 7.71E+02 7.95E+02 8.19E+02 8.44E+02 8.68E+02 8.93E+02 9.17E+02 9.41E+02 9.65E+02 9.90E+02 1.01E+03 1.04E+03 1.07E+03 1.10E+03 1.13E+03 1.17E+03 1.20E+03 1.24E+03 1.27E+03 1.30E+03 1.34E+03 1.37E+03 1.41E+03 1.44E+03 1.48E+03 1.53E+03 1.57E+03 1.62E+03 1.67E+03 1.72E+03 1.76E+03 1.81E+03 1.86E+03 1.91E+03 1.96E+03 2.00E+03 2.06E+03 2.13E+03 2.19E+03 2.26E+03 2.33E+03 2.40E+03 2.46E+03 2.53E+03 100 750314979 Frequency(Hz) 1.00E+04 1.03E+04 1.06E+04 1.10E+04 1.13E+04 1.16E+04 750314981 1.19E+04 1.22E+04 1.26E+04 750314980 1.29E+04 1.32E+04 750314979 1.35E+04 1.39E+04 1.44E+04 750314978 1.48E+04 1.52E+04 750314977 1.57E+04 1.61E+04 750314976 1.66E+04 1.70E+04 1.75E+04 1.79E+04 1.84E+04 1.88E+04 1.93E+04 2.00E+04 2.06E+04 2.12E+04 2.18E+04 2.25E+04 2.31E+04 2.37E+04 2.43E+04 2.49E+04 2.56E+04 2.62E+04 2.69E+04 2.78E+04 2.86E+04 2.95E+04 3.04E+04 3.12E+04 3.21E+04 3.30E+04 750314979 1.09E+03 1.13E+03 1.16E+03 1.20E+03 1.23E+03 1.27E+03 1.30E+03 1.34E+03 1.37E+03 1.41E+03 1.44E+03 1.48E+03 1.52E+03 1.57E+03 1.61E+03 1.66E+03 1.71E+03 1.76E+03 1.81E+03 1.86E+03 1.91E+03 1.95E+03 2.00E+03 2.05E+03 2.11E+03 2.18E+03 2.25E+03 2.31E+03 2.38E+03 2.45E+03 2.52E+03 2.59E+03 2.66E+03 2.72E+03 2.79E+03 2.86E+03 2.94E+03 3.04E+03 3.13E+03 3.24E+03 3.33E+03 3.43E+03 3.53E+03 3.62E+03 3 Impedance (Ω) 05/16 750341633 750341634 Frequency(Hz) 750341633 Frequency(Hz) 10000 18.2827 10000 10174.194 18.6113 10174.194 DC16US - Differential18.9458 Mode Impedance 10351.422 10351.422 10531.737 19.258 10531.737 10715.193 19.582 10715.193 10901.845 19.9136 10901.845 11091.748 20.2609 11091.748 11284.959 20.6568 11284.959 11481.536 20.9882 11481.536 11681.537 21.3642 11681.537 11885.022 21.734 11885.022 12092.052 22.0896 12092.052 12302.688 22.4999 12302.688 12516.993 22.8723 12516.993 12735.031 23.305 12735.031 12956.867 23.6557 12956.867 13182.567 24.0827 13182.567 13412.199 24.5406 13412.199 13645.831 24.9398 13645.831 13883.533 25.3592 13883.533 14125.375 25.8092 14125.375 14371.431 26.2428 14371.431 14621.772 26.7115 14621.772 14876.474 27.1612 14876.474 15135.612 27.6885 15135.612 15399.265 28.1365 15399.265 15667.511 28.6477 15667.511 15940.429 29.1342 15940.429 16218.101 29.6081 16218.101 16500.61 30.1561 16500.61 16788.04 30.6675 16788.04 31.1705 17080.477 0.117080.477 1 10 17378.008 31.7673 17378.008 Frequency (MHz) 17680.722 32.2802 17680.722 17988.709 32.8128 17988.709 18302.061 33.4047 18302.061 18620.871 33.9861 18620.871 18945.235 34.5772 18945.235 19275.249 35.1849 19275.249 19611.012 35.8037 19611.012 19952.623 36.4146 19952.623 20300.185 37.0903 20300.185 20653.802 37.7171 20653.802 750341634 25.8354 26.2911 26.7805 27.2207 27.6518 28.1739 28.6214 29.1674 29.6668 30.1492 30.6405 31.2039 31.7574 32.3833 32.9288 33.457 34.0586 34.6605 35.2334 35.8798 36.4585 37.0793 37.7556 38.4385 39.1016 39.8042 40.436 41.1874 41.8566 42.6158 43.3647 44.1398 44.832 45.6086 46.399 47.2659 48.0687 48.9253 49.7752 50.6204 51.5429 52.4119 53.2919 100 750341635_1 Frequency(Hz) 10000 10174.194 10351.422 10531.737 750341781 10715.193 10901.845 750341780 11091.748 750341638 11284.959 11481.536 750341637 11681.537 750341636 11885.022 12092.052 750341635 12302.688 12516.993 750341634 12735.031 750341633 12956.867 13182.567 750341632 13412.199 13645.831 13883.533 14125.375 14371.431 14621.772 14876.474 15135.612 15399.265 15667.511 15940.429 16218.101 16500.61 16788.04 17080.477 17378.008 17680.722 17988.709 18302.061 18620.871 18945.235 19275.249 19611.012 19952.623 20300.185 20653.802 DC16US 14mm Differential Mode Impedance 750314976 750341635 Frequency(Hz) 750314976 38.7787 10000 8.745752325 39.4127 40.1836 10321.03793 9.024647692 9.305232044 40.7973 10642.07585 1,000,000 9.58554067 41.5006 10963.11377 42.2966 11284.1517 9.865086857 42.9828 11605.18962 10.14387996 43.8111 11926.22755 10.42418267 100,000 44.5216 12247.26547 10.70396252 45.2281 12568.3034 10.98304902 46.068 12889.34132 11.26321407 46.8683 13210.37925 11.54191542 11.82324696 47.7323 13531.41717 10,000 12.1504167 48.5322 13908.60528 49.38 14355.12425 12.54004477 12.92983791 14801.64323 50.202 13.31841297 15248.16221 51.0934 1,000 13.70796649 51.9883 15694.68119 52.8832 16141.20016 14.09698958 53.8757 16587.71914 14.48600471 14.87431946 17034.23812 54.7245 55.6835 17480.7571 10015.2631184 56.6289 17927.27608 15.65104774 57.655 18373.79505 16.04000521 58.6195 18820.31403 16.43027316 59.6741 19344.93007 16.88636825 10 60.7612 19965.97569 17.42847044 61.8268 20587.02131 17.96866741 18.5090228 62.8337 21208.06694 19.0499627 63.9349 21829.11256 1 65.0442 22450.15818 19.59052788 66.1636 23071.2038 20.13109248 0.01 23692.24942 20.67252217 67.3691 24313.29504 21.21176098 68.5259 24934.34066 21.75308345 69.6439 25555.38628 22.29430134 70.9328 26176.4319 22.83520175 72.2253 26906.09965 23.46869829 73.4227 27769.88749 24.22166251 74.7479 28633.67533 24.97211613 75.9738 29497.46317 25.72383798 77.2757 30361.25101 26.47571392 78.6857 31225.03885 27.2279146 80.0413 32088.82669 27.97876952 Impedance (Ω) DC16US Differential Mode Impedance 750341632 Frequency(Hz) 750341632_1 10000 8.80994 10174.194 8.96713 10351.422 9.12896 10531.737 9.27772 1,000,000 10715.193 9.42907 10901.845 9.57756 11091.748 9.74052 11284.959 9.91122 100,000 11481.536 10.0879 11681.537 10.2559 11885.022 10.4403 12092.052 10.626 10,000 12302.688 10.7862 12516.993 10.9794 12735.031 11.179 12956.867 11.3567 13182.567 11.55 1,000 13412.199 11.7575 13645.831 11.9532 13883.533 12.1652 14125.375 12.3772 100 14371.431 12.5706 14621.772 12.7915 14876.474 13.015 15135.612 13.24 15399.26510 13.4774 15667.511 13.7191 15940.429 13.9565 16218.101 14.1765 16500.61 14.4215 16788.04 1 14.6857 17080.477 0.0114.9297 17378.008 15.159 17680.722 15.4319 17988.709 15.7005 18302.061 15.98 18620.871 16.2644 18945.235 16.5446 19275.249 16.8129 19611.012 17.115 19952.623 17.4236 20300.185 17.6988 20653.802 18.0186 750314977 750314978 Frequency(Hz) 750314977 Frequency(Hz) 10000 16.75908632 10000 DC16US 14mm17.29537387 - Differential Mode Impedance 10321.03793 10321.03793 10642.07585 17.83246654 10642.07585 10963.11377 18.36834489 10963.11377 11284.1517 18.90578299 11284.1517 11605.18962 19.44053855 11605.18962 11926.22755 19.97845719 11926.22755 12247.26547 20.51442265 12247.26547 12568.3034 21.0507528 12568.3034 12889.34132 21.58737257 12889.34132 13210.37925 22.12256897 13210.37925 13531.41717 22.66024892 13531.41717 13908.60528 23.28944777 13908.60528 14355.12425 24.03708817 14355.12425 14801.64323 24.78214753 14801.64323 15248.16221 25.52825302 15248.16221 15694.68119 26.27470378 15694.68119 16141.20016 27.02028611 16141.20016 16587.71914 27.76683708 16587.71914 17034.23812 28.51243289 17034.23812 17480.7571 29.25800623 17480.7571 17927.27608 30.00407715 17927.27608 18373.79505 30.74983083 18373.79505 18820.31403 31.49810664 18820.31403 19344.93007 32.3734169 19344.93007 19965.97569 33.41113865 19965.97569 20587.02131 34.44915816 20587.02131 21208.06694 35.48634055 21208.06694 21829.11256 36.52275009 21829.11256 22450.15818 37.55978647 22450.15818 23071.2038 38.59833117 23071.2038 0.1 1 10 23692.24942 39.63633171 23692.24942 Frequency (MHz) 24313.29504 24313.29504 40.67417778 24934.34066 41.71003089 24934.34066 25555.38628 42.74909014 25555.38628 26176.4319 43.78743873 26176.4319 26906.09965 45.0051603 26906.09965 27769.88749 46.44846638 27769.88749 28633.67533 47.89159763 28633.67533 29497.46317 49.33546686 29497.46317 30361.25101 50.77727562 30361.25101 31225.03885 52.22253712 31225.03885 32088.82669 53.66484659 32088.82669 750314978 25.97840057 26.81015132 27.64262554 28.47380166 29.30591499 30.13696822 30.97001549 31.80222825 32.6342312 33.466203 34.29638626 35.13036263 36.10695003 37.26538498 38.42248196 39.57871711 40.7361509 41.8939191 43.05141919 44.20859354 45.36426808 46.52190082 47.67999155 48.84091058 50.19781614 51.80694059 53.41849048 55.02829786 56.63720222 58.24814452 59.85577699 61.46929353 63.07812159 64.6890148 66.30092987 67.91058746 69.80222365 72.04131034 74.27945651 76.52363707 78.76095088 81.00275884 83.24517525 100 750314979 Frequency(Hz) 10000 10321.03793 10642.07585 10963.11377 750314981 11284.1517 11605.18962 750314980 11926.22755 12247.26547 12568.3034 750314979 12889.34132 13210.37925 750314978 13531.41717 13908.60528 750314977 14355.12425 14801.64323 15248.16221 750314976 15694.68119 16141.20016 16587.71914 17034.23812 17480.7571 17927.27608 18373.79505 18820.31403 19344.93007 19965.97569 20587.02131 21208.06694 21829.11256 22450.15818 23071.2038 23692.24942 24313.29504 24934.34066 25555.38628 26176.4319 26906.09965 27769.88749 28633.67533 29497.46317 30361.25101 31225.03885 32088.82669 750314979 38.78404372 40.02590123 41.26910997 42.51075405 43.75278671 44.99292824 46.23659208 47.4779337 48.72076667 49.96294985 51.20363203 52.44754545 53.90829822 55.63514537 57.36257994 59.08927941 60.81750969 62.54612319 64.27386724 66.00138066 67.72806537 69.45751995 71.18584325 72.91810802 74.94565622 77.35113154 79.75637459 82.15835052 84.56294516 86.96525765 89.37042433 91.77878196 94.18164035 96.5846205 98.99518143 101.396442 104.2237923 107.5690464 110.917624 114.2626885 117.6069833 120.9556956 124.3050564 127 MID-ILTFLY Transformers for Linear Technology Isolated Flyback Converters Applications Characteristics Interleaved winding for low leakage inductance ■ Isolation voltage: 1875VAC at 1 second ■ Industrial & medical power supplies High saturation current for low-power, DC/DC transformers ■ Lead free and RoHS compliant ■ Isolated auxiliary/housekeeping power supplies ■ Operating temp: -40°C to 125°C ■ ■ Package sizes: EP7, EP10 and EP13 ■ Designed to meet IEC/UL/EN60950-1 ■ ■ Bifilar windings on secondary to handle high currents ■ ■ Self-shielding and space efficient ■ Functional insulation Isolated DC/DC supplies, home automation, telecom and automotive IC Characteristics ■ Micropower isolated flyback converter ■ Boundary mode operation at heavy load ■ Low-Ripple Burst Mode® operation at light load No transformer aux winding or opto-isolator required for regulation ■ 128 EP7 8-Terminal Dimensions & Footprint EP7 6-Terminal Dimensions & Footprint EP10 Dimensions & Footprint EP13 Dimensions & Footprint www.we-online.com/midcom 05/16 MID-ILTFLY Transformers for Linear Technology Isolated Flyback Converters LT8300 - 100VIN Micropower Isolated Flyback Converter with 150V/260mA Switch Order Code Package Size Ui (VAC) UO (V) IO (A) UAUX (V) L (mH) ISAT (A) NPRI:NSEC:NAUX fswitch (kHz) UT (VAC) 750312557 EP7 12, 24, or 48 5 or 3.3 0.170 to 0.420 - 0.300 0.450 6:1 70 1875 750312365 EP7 12, 24, or 48 5.0 0.150 to 0.290 - 0.300 0.600 4:1 100 1875 750312366 EP7 22-75 5.0 0.250 - 0.400 0.580 7.11 : 1 100 1875 750312367 EP7 12, 24, or 48 3.3 0.240 to 0.510 - 0.300 0.450 8.4 : 1 100 1875 750312558 EP7 12, 24, or 48 15 or 12 0.028 to 0.067 - 0.300 0.540 2 : 1:1 70 1875 750312559 EP7 12, 24, or 48 24.0 0.033 to 0.037 - 0.300 0.450 1:1 70 1875 750311019 EP7 12, 24, or 48 5 or 3.3 0.170 to 0.420 6.6 0.400 0.750 6:1:2 200-300 1875 750311558 EP7 12, 24, or 48 5.0 0.150 to 0.290 5.0 0.300 0.500 4:1:1 200-300 1875 750311559 EP7 12, 24, or 48 5.0 0.150 to 0.290 5.0 0.175 0.800 4:1:1 200-300 1875 750311659 EP7 12, 24, or 48 24.0 0.033 to 0.067 5.0 0.300 0.560 5:5:1 180 1875 750311660 EP7 12, 24, or 48 15 or 12 0.056 to 0.134 5.0 0.350 0.520 6:3:1 190 1875 750311838 EP7 12, 24, or 48 15 or 12 0.028 to 0.067 - 0.350 0.520 2 : 1:1 190 1875 LT8301 - 42VIN Micropower No-Opto Isolated Flyback Converter with 65V/1.2A Switch Order Code Package Size Ui (VDC) UO1 (V) IO1 (A) UO2 (V) IO2 (A) UAUX (V) L (mH) ISAT (A) NPRI:NSEC:NAUX fswitch (kHz) UT (VAC) 750310799 EP7 8-30 12.0 0.22 - - 5 0.025 2.0 1 : 1 : 0.33 200-300 1875 750313970 EP10 18-42 3.3 0.75 3.3 0.75 - 0.040 2.0 2:1 200-300 1875 750313972 EP10 18-42 5.0 0.42 5.0 0.42 - 0.040 2.0 1:1 200-300 1875 750313973 EP10 8-36 3.3 0.80 3.3 0.80 - 0.040 2.0 4:1 200-300 1875 750313974 EP10 8-36 5.0 0.55 5.0 0.55 - 0.040 2.0 3:1 200-300 1875 750313975 EP10 8-36 24.0 0.12 24.0 0.12 - 0.040 2.0 1:2 200-300 1875 750313976 EP10 8-32 48.0 0.05 48.0 0.05 - 0.040 2.0 1:4 200-300 1875 750370047 EP7 8-32 5.0 0.55 - - 5 0.030 1.7 3:1:1 200-300 1875 3 LT8302 - 42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch Order Code Package Size Ui (VDC) UO1 (V) IO1 (A) L (mH) ISAT (A) NPRI:NSEC:NAUX UT (VAC) 750311625 EP13 8 to 32 3.3 2.10 0.009 8.00 4 : 1 : 2.25 1875 750311564 EP13 8 to 32 5.0 1.50 0.009 8.00 3 : 1 : 1.75 1875 750313441 EP10 8 to 32 5.0 1.30 0.009 8.00 2:1 1875 750311624 EP13 8 to 32 8.0 0.90 0.009 8.00 3:2:1 1875 750313443 EP10 8 to 32 12.0 0.30 0.009 7.30 1:1 1875 750313445 EP10 8 to 32 24.0 0.30 0.009 7.50 1:2 1875 750313457 EP10 8 to 32 48.0 0.15 0.009 7.50 1:4 1875 750313460 EP10 4 to 18 5.0 0.90 0.012 7.75 4:1 1875 750311342 EP10 4 to 18 12.0 0.40 0.015 5.80 2:1:1 1500 750313439 EP10 8 to 42 3.3 2.10 0.012 8.00 2:1 1875 750313442 EP10 8 to 42 5.0 1.60 0.012 7.30 3:2 1875 Other Würth Elektronik Components ■ 7443551221: WE-HCI SMD Flat Wire High Current Inductor ■ 744770112: WE-PD SMD Shielded Power Inductor 05/16 129 MID-IMAXFLY Micro PLC Transformer for Maxim Integrated Universal Input System Board Applications Characteristics ■ Low profile ■ Low leakage inductance ■ Industrial controls ■ Extended rail ■ Isolation voltage: 3750VAC at 1 second ■ Factory automation ■ Small footprint ■ Lead free and RoHS compliant ■ Micro PLC ■ Pick & placeable ■ Operating temp: -40°C to 125°C ■ Triple output ■ Max height (mm): 5 High accuracy analog-to-digital converters ■ Electrical Properties 130 Order Code Ui (VDC) UO1 (V) IO1 (A) UO2 (V) IO2 (A) UO3 (V) IO3 (A) UAUX (V) L (mH) ISAT (A) NP : NS : NAUX Fswitch (kHz) UT (VDC) 750315319 24.00 5.00 0.02 7.50 0.10 10.00 0.02 12.00 0.30 0.15 4.57 : 1 : 1.28 : 1.85 : 2.28 190 3750 www.we-online.com/midcom 05/16 MID-IMAXPP Isolated DC/DC Push-Pull Transformers for Maxim’s MAX258, MAX13253 and MAX13256 Drivers Applications Characteristics ■ Extended rails help achieve higher isolation ■ Functional insulation ■ Isolated communication fieldbus interfaces ■ Surface mount parts with a small footprint ■ Isolation voltage: 3125VAC at 1 second ■ 24V PLC supply isolation ■ Low profile and rounded self-shielding cores ■ Lead free and RoHS compliant ■ Industrial automation ■ Very low leakage inductance ■ Operating temp: -40°C to 125°C ■ Isolated medical power ■ Robotics and power meter data interface Electrical Properties Order Code Package Size Ui (VAC) UO (V) I O (A) L (mH) NPRI: NSEC : NAUX fswitch (kHz) UT (VAC) IC Number 750315089 EP5HV 3-5.5 3.0-5.5 0.5 0.635 1:1 250 3125 MAX258, MAX13253 750315090 EP5HV 3-5.5 3.0-5.5 0.5 0.270 1:1 250 3125 MAX258, MAX13253 750314706 EP5HV 3-5.5 5.4-9.9 0.5 0.250 1 : 1.8 250 3125 MAX258, MAX13253, MAX13256 750315072 EP5HV 3-5.5 2.0-3.6 0.5 0.635 1.53 : 1 250 3125 MAX258, MAX13253, MAX13256 750315213 EP7 8-36.0 8.0-36.0 0.5 0.563 1:1 250 3125 MAX258, MAX13256 750315214 EP7 8-36.0 2.0-9.0 0.5 0.563 4:1 250 3125 MAX258, MAX13256 EP5HV Dimensions & Footprint 05/16 3 EP7 Dimensions & Footprint 131 MID-ITIFBK Low-Profile Transformers for Texas Instruments Fly-BuckTM for Industrial Applications Applications Characteristics ■ Fly-BuckTM topology ■ Low cost and high efficiency ■ Small footprint ■ Pick & placeable ■ Wide input voltage range ■ Isolation voltage: 625VAC to 5,000VAC for 1 second ■ Excellent leakage inductance and interwinding capacitance performance ■ Functional and Basic insulation ■ Lead free and RoHS compliant ■ Operating temp: -40° to 125°C ■ Industrial programmable logic controllers (PLCs) ■ Building automation and process control Isolated interface power: RS-422, RS-485, CAN, I2C, LAN ■ Motor drive control, inverters and industrial automation ■ Isolated low power drivers & regulators, smart e-meters ■ Bias power supplies for gate drives and op-amps ■ Electrical Properties 132 Order Code Package Size Ui (VDC) UO1 (V) IO1 (A) UO2 (V) IO2 (A) UO3 (V) IO3 (A) UO4 (V) IO4 (A) L (mH) ISAT (A) 750315250 ER9.5S 750315249 ER9.5S 750315248 NP : NS : NAUX fswitch (kHz) UT (VAC) L (mm) W (mm) H (mm) 20-30 5.00 0.100 -5.00 0.100 - - - - 0.0300 20-30 15.00 0.050 -15.00 0.050 - - - - 0.0300 0.90 2:1:1 350 1875 10.00 14.00 5.00 0.92 1 : 1.5 : 1.5 350 1875 10.00 14.00 ER9.5S 20-30 5.00 0.100 -5.00 0.100 - - - - 5.00 0.0300 0.96 1:1:1 350 1875 10.00 14.00 750315247 ER9.5S 20-30 15.00 0.100 - - - - - 5.00 - 0.0300 0.88 1:2 350 1875 10.00 14.00 750315246 ER9.5S 16-36 5.00 0.200 - - - - 5.00 - - 0.0260 0.96 1 : 1.09 350 1875 10.00 14.00 750315245 ER9.5S 20-30 5.00 0.200 - - - 5.00 - - - 0.0300 0.96 1:1 350 1875 10.00 14.00 750315144 ER9.5S 12-36 -17.50 0.030 17.50 0.045 5.00 - - - - 0.0800 0.50 1:2:2 300 625 10.00 14.00 750314851 EE16/8/5 14-40 14.00 0.100 5.00 5.00 0.050 14 0.050 5 0.05 0.0680 1.80 1.833 : 1.666 : 1 : 1.666 : 1 300 4000 17.78 26.10 13.80 750314624 EE20/10/6 17-35 16.00 0.100 9.00 0.100 -16 0.100 -9 0.10 0.0600 1.55 1.08 : 1 : 1.75 : 1 : 1.75 250 5000 16.00 25.00 16.00 750315039 EFD20 24 5.00 1.000 15.00 0.200 - - - - 0.0400 1.80 1.43 : 1 : 2.86 : 2.86 250 1875 23.11 29.08 11.43 750312924 EP5 36-75 10.00 0.120 5.00 0.080 - - - - 0.0260 0.55 2:2:1 750 1875 8.35 6.35 9.50 750312750 EP5 20-100 10.00 0.300 - - - - - - 0.0230 0.76 1:1 750 1500 6.60 8.26 5.59 750311880 EP7 3-6 5.00 0.200 - - - - - - 0.0025 - 1 : 2.5 200-600 4000 9.78 9.14 10.54 750314597 EP7 10-40 15.50 0.250 - - - - - - 0.0600 0.84 1 : 1.5 150 175 9.78 9.14 10.54 750314952 EP7 10-40 3.30 0.005 3.30 0.030 - - - - 0.0025 - 1 : 1.25 100 2500 9.78 9.14 10.54 750311780 EP7 2.5-3.5 15.00 0.200 15.00 0.200 - - - - 0.0020 10.00 1:8:8 500 2500 9.78 9.14 10.54 750342178 ER9.5 17-32 15.00 0.050 15.00 0.050 - - - - 0.0500 1.50 1 : 1.935 : 1.935 250 1500 15.49 17.02 6.99 750342304 EP10 10-36 7.00 0.250 - - - - - - 0.2600 - 1:1 250-600 1750 10.00 12.07 5.97 750314225 EP10 15-40 5.00 0.250 5.00 0.250 - - - - 0.0500 1.30 1.5 : 1 250-600 1500 13.34 15.25 11.43 750314226 EP10 15-40 15.00 0.150 15.00 0.150 - - - - 0.0500 1.20 2:1 250-600 1500 13.34 15.25 11.43 750342156 EP13 15-40 12.75 0.600 12.75 0.600 - - - - 0.0660 1.20 1:1 600 1875 13.34 15.25 11.43 750315445 EPC13 9-18 15.00 0.200 9.00 0.200 - - - - 0.0250 2.50 1 : 1 : 0.598 300 2500 14.60 14.73 8.50 750313995 EP13 15-40 5.00 0.100 5.00 0.100 15 0.050 15 0.05 0.0500 1.50 1.5 : 1 : 1 : 2 : 2 250-600 1500 13.46 17.75 12.70 750314441 ER11.5 17-36 24.00 0.025 3.30 0.050 - - - - 0.0800 0.52 1 : 2.56 : 0.389 200 1500 10.00 13.80 4.00 750314442 ER11.5 17-35 10.00 0.025 5.00 0.080 -10 0.025 -5 0.08 0.0450 0.78 2.08 : 2 : 1 : 2 : 1 200-350 1875 12.95 12.70 5.98 750314459 ER11.5 17-35 7.00 0.030 5.00 0.080 -7 0.030 -5 0.08 0.0450 0.80 1.79 : 1.29 : 1 : 1.29 : 1 200-350 1875 12.95 12.70 5.98 750314460 ER11.5 17-35 12.00 0.030 12.00 0.030 -5 0.080 -5 0.08 0.0450 0.90 1.79 : 2.29 : 2.29 : 1 : 1 200-350 1875 12.95 12.70 5.98 750314461 ER11.5 17-35 15.00 0.033 5.00 0.100 -5 0.100 - - 0.0450 0.96 1.92 : 3 : 1 : 1 200-350 1875 12.95 12.70 5.98 750314462 ER11.5 17-35 5.00 0.100 12.00 0.040 -12 0.040 - - 0.0450 0.98 1.92 : 1 : 2.38 : 2.38 200-350 1875 12.95 12.70 5.98 750314463 ER11.5 17-35 24.00 0.020 12.00 0.040 -12 0.040 - - 0.0450 0.96 1 : 2.36 : 1.16 : 1.16 200-350 1875 12.95 12.70 5.98 750315038 PQ2020 7-26 23.00 0.300 23.00 0.100 23 0.100 23 0.10 0.0365 - 1 : 2.33 : 2.33 : 2.33 250-600 4500 23.36 23.88 24.14 www.we-online.com/midcom 05/16 MID-ITIPP Transformers for Texas Instruments Push-Pull Driver for Isolated Power Supplies Applications Characteristics ■ Surface mount Isolated interface power supply for: - CAN - RS485 - RS422 - RS232 - SPI - I2C - Low power LAN ■ Industrial automation ■ Process control ■ Medical equipment ■ ■ Low profile ■ Qualified to AEC-Q200 ■ Operating temp: -40°C to 125°C ■ SN6501 max LxWxH (mm): 6.73 x 10.05 x 4.19 ■ SN6501HV max LxWxH (mm): 9.14 x 12.70 x 7.62 SN6501 designed to meet: - IEC60950-1, EN60950-1, UL60950-1/CSA60950-1, AS/NZS609501.1 - Functional insulation for a primary circuit at a working voltage of 400VRMS ■ SN6501HV designed to meet: - IEC60950-1, EN60950-1, UL60950-1/CSA60950-1, AS/NZS609501.1 - Reinforced for 250VRMS - IEC60664-1 - Reinforced for 400VRMS for up to 2km above sea level - Basic for 800VRMS for up to 2km above sea level - IEC60601-1 - Two means of patient protection up to 250VRMS working voltage ■ 3 SN6501 Electrical Properties Order Code Ui (VDC) UO (V) LDO Used IO (A) L (mH) NPRI: NSEC : NAUX fswitch (kHz) UT (VAC) ∫Udt (µVs) 760390012 3.3 3.3 No 0.15 0.475 1 : 1.1 300-620 2500 11 760390012 5.0 5.0 No 0.15 0.475 1 : 1.1 300-620 2500 11 760390013 3.3 5.0 No 0.15 0.475 1 : 1.7 250-550 2500 11 760390014 3.3 3.3 Yes 0.15 0.475 1 : 1.3 300-620 2500 11 760390014 5.0 5.0 Yes 0.15 0.475 1 : 1.3 300-620 2500 11 760390015 3.3 5.0 Yes 0.15 0.475 1:2 250-550 2500 11 SN6501HV Electrical Properties Order Code Ui (VDC) UO (V) IO (A) L (mH) NPRI: NSEC : NAUX fswitch (kHz) UT (VAC) ∫Udt (µVs) 750313734 5.0 5.0 0.15 0.34 1 : 1.1 250-550 5000 11 750313734 3.3 3.3 0.15 0.34 1 : 1.1 250-550 5000 11 750313638 5.0 5.0 0.15 0.34 1.3 : 1 250-550 5000 11 750313638 5.0 3.3 0.15 0.34 1.3 : 1 250-550 5000 11 750313638 3.3 3.3 0.15 0.34 1.3 : 1 250-550 5000 11 750313626 3.3 5.0 0.15 0.34 1:2 250-550 5000 11 750313769 3.3 5.0 0.15 0.34 1 : 1.7 250-550 5000 11 05/16 133 MID-OL16 Surface Mount Offline EE16 Transformers Applications Characteristics ■ Surface mount design ■ Max LxWxH (mm): 17.78 x 26.10 x 13.80 ■ Offline switching power ■ Multiple output voltage options ■ Package size: EE16/8/5 ■ Smart metering ■ Flexible auxiliary voltage taps ■ ■ Electronic ballasts ■ Isolation voltage: 3750VAC at 1 second ■ White goods ■ Industrial telecom Designed to meet IEC60950-1 reinforced 400VDC Electrical Properties 134 Order Code Ui (VAC) UO1 (V) IO1 (A) UO2 (V) IO2 (A) Uaux (V) L (mH) Isat (A) NPRI: NSEC : NAUX fswitch (kHz) UT (VAC) 750811116 85-265 5 2.550 - - 6 & 14 or 20 1.31 0.80 23.3 : 1 : 3.8 80-120 3000 750811137 85-265 12 1.050 - - 6 & 14 or 20 1.39 0.74 9.7 : 1 : 1.57 80-130 3000 750813530 85-130 15 0.535 6 0.535 6 & 14 or 20 1.50 0.62 21.7 : 2.3 : 1 : 2.7 80-100 3000 750813540 85-130 25 0.400 6 0.400 6 & 14 or 20 1.25 0.80 21.3 : 3.8 : 1 : 3.2 80-100 3000 750813551 85-130 35 0.850 6 0.285 6 & 14 or 20 1.50 0.62 21.3 : 5.3 : 1 : 3.2 80-110 3000 750815530 195-265 15 0.520 6 0.520 6 & 14 or 20 8.00 0.27 48 : 2.3 : 1 : 3.2 80-110 3000 750815542 195-265 25 0.500 6 0.500 6 & 14 or 20 5.00 0.39 51 : 3.8 : 1 : 3.2 80-120 3000 750815550 195-265 35 0.325 6 0.325 6 & 14 or 20 6.00 0.33 52 : 5.6 : 1 : 3.4 80-115 3000 www.we-online.com/midcom 05/16 MID-OLEE EE Package Style Transformers for AC/DC Converters Applications Characteristics ■ For Universal input voltage ■ Offline switching power ■ Switching frequency 45-150KHz ■ Smart metering ■ Low real estate ■ Electronic ballasts ■ Extended rails ■ Reinforced insulation White goods ■ ■ Isolation voltage: 3750 or 4500VAC at 1 second Industrial telecom ■ ■ Lead-Free and RoHS compliant ■ Complies with IEC60950-1, EN60950-1, UL60950-1/CSA60950-1 and AS/NZS60950.1 ■ Operating temp: -40°C to 125°C 3 Electrical Properties Order Code Package Size UI (VAC) L (mH) ISAT (A) NPRI: NSEC : NAUX fswitch UO1 (V) I01 (A) UAUX (V) UT (VAC) Mount 7508110160 EE13/6/6 55-265 1.590 0.480 15 : 1 : 1.75 45-70 5 1.00 8.7 4500 THT 7508110330 EE13/6/6 55-265 1.880 0.360 8.71 : 1.35 : 1 50-60 12 0.45 8.7 4500 THT 7508110333 EE13/6/6 55-265 1.880 0.360 5 : 1 : 1.33 50-65 15 0.32 20.0 4500 THT 7508110419 EE13/6/6 55-265 2.250 0.260 3.8 : 1.19 : 1 50-65 24 0.17 20.0 4500 THT 7508110420 EE13/6/6 55-265 1.950 0.320 3.8 : 1.48 : 1 50-65 30 0.16 20.0 4500 THT 7508170313 EE13/7/4 55-265 0.592 0.725 4.6 : 1 : 1.05 150 15 0.31 16.0 3750 SMD 7508170312 EE13/7/4 55-265 1.990 0.360 4.63 : 1 : 1.06 50 15 0.21 16.0 3750 SMD 7508170311 EE13/7/4 55-265 0.491 0.860 5.75 : 1 : 1.31 150 12 0.42 16.0 3750 SMD 7508170310 EE13/7/4 55-265 1.990 0.365 5.79 : 1 : 1.32 50 12 0.30 16.0 3750 SMD 750817015 EE13/7/4 55-265 0.491 0.875 13.14 : 1 : 3 150 5 0.90 16.0 3750 SMD 750817014 EE13/7/4 55-265 1.840 0.375 13 : 1 : 3 50 5 0.70 16.0 3750 SMD 05/16 135 MID-OLEFD THT EFD Transformers for AC/DC Converters EFD20 Characteristics Applications EFD25 Characteristics ■ For universal input voltage ■ For universal input voltage ■ LED lighting ■ Switching frequency: 68kHz to 100kHz ■ Switching frequency: 68KHz to 170KHz ■ Offline switching power ■ Low profile ■ Extended rails ■ Power electronics ■ Isolation voltage: 4500VAC at 1 second ■ Tapped aux winding of 6V and 14V or 20V ■ Operating temp: -40°C to 125°C ■ Reinforced insulation Electronics ballasts ■ ■ Max LxWxH (mm): 21.50 x 33.80 x 12.00 ■ Isolation voltage: 4500VAC at 1 second White goods ■ ■ Package size: EFD20 ■ Operating temp: -40°C to 125°C ■ Designed for IEC61558-2 reinforced 400VDC ■ Max height (mm): 14 ■ Designed to meet IEC61558-2-16 EFD20 Electrical Properties Order Code Ui (VAC) UO1 (V) I01 (A) UO2 (V) I02 (A) UAUX (V) L (mH) ISAT (A) NPRI:NSEC:NAUX fswitch (kHz) UT (VAC) 750811612 85-265 5 1.90 5 1.9 20 0.8 1.4 5.26 : 0.26 : 0.26 : 1 68-110 4500 7508116313 85-265 12 1.00 12 1.0 20 0.8 1.4 9.09 : 0.27 : 1.18 : 1 68-120 4500 750811644 85-265 24 0.50 24 0.5 20 0.8 1.4 11.11 : 1.88 : 1 68-140 4500 7508112330 85-265 16 1.50 - - 20 0.8 1.4 6.66 : 0.26 : 0.6 : 1 68-120 4500 7508112512 85-265 32 0.75 - - 20 0.8 1.4 11.11 : 1.55 : 1 68-170 4500 7508112513 85-265 40 0.60 - - 20 0.8 1.4 6.66 : 0.8 : 1 68-170 4500 750811613 85-265 5 2.00 12 1.0 20 0.8 1.4 6.66 : 0.6 : 0.6 : 1 68-160 4500 750811614 85-265 5 2.00 24 0.5 20 0.8 1.4 8.33 : 1.16 : 1.16 : 1 68-190 4500 UO1 (V) I01 (A) UO2 (V) I02 (A) UAUX (V) L (mH) ISAT (A) NPRI:NSEC:NAUX fswitch (kHz) UT (VAC) EFD25 Electrical Properties 136 Order Code Ui (VAC) 750811512 85-265 5 1.6 5 1.6 20 0.8 2.0 20 : 1 : 1 : 2.75 : 1.25 68-120 4500 7508116314 85-265 12 1.3 12 1.3 20 0.5 2.1 16.66 : 2 : 2 : 2.33 : 1 68-110 4500 750811645 85-265 24 0.7 24 0.7 20 0.5 2.0 16.66 : 4 : 4 : 2.33 : 1 68-100 4500 7508112334 85-265 16 1.6 - - 20 0.4 2.2 16 : 2.33 : 2 : 1 68-110 4500 7508112514 85-265 32 1.0 - - 20 0.5 1.9 16 : 4.66 : 2 : 1 68-115 4500 7508112515 85-265 40 0.8 - - 20 0.5 1.9 16.66 : 6.33 : 2.33 : 1 68-105 4500 750811616 85-265 5 1.7 12 2.0 20 0.5 2.5 20 : 1 : 2.33 : 2.66 : 1.33 68-170 4500 750811617 85-265 5 1.1 24 0.6 20 0.8 2.0 20 : 4.5 : 1 : 2.75 : 1.25 68-170 4500 www.we-online.com/midcom 05/16 MID-OLEFD SMD EFD Transformers for AC/DC Converters Applications Characteristics ■ Low profile ■ LED lighting ■ For Universal input voltage ■ Offline switching power ■ Switching frequency: 68kHz to 250kHz ■ Power electronics ■ Isolation voltage: 4500VAC at 1 second ■ Operating temp: -40°C to 125°C Electronic ballasts ■ ■ Max height (mm): 12 White goods ■ ■ Package size: EFD20 12-Pin, SMD-H EXT ■ Designed to meet IEC61558-2 reinforced 400VDC 3 Electrical Properties Order Code Ui (VAC) U01 (V) I01 (A) U02 (V) I02 (A) U03 (V) I03 (A) UAUX (V) L (mH) ISAT (A) NPRI:NSEC:NAUX fswitch (kHz) UT(VAC) 750811611 85-265 5 2.00 5 2.00 - - 6 & 14 or 20 0.8 1.4 20 : 0.833 : 0.833 : 2.16 : 1 68-100 4500 7508116312 85-265 12 1.00 12 1.00 - - 6 & 14 or 20 0.8 1.4 20 : 1.8 : 1.8 : 2.2 : 1 68-120 4500 750811643 85-265 24 0.50 24 0.50 - - 6 & 14 or 20 0.8 1.4 20 : 3.6 : 3.6 : 2.2 : 1 68-120 4500 7508112327 85-265 16 1.30 - - - - 6 & 14 or 20 0.8 1.4 20 : 2.4 : 2.2 : 1 68-130 4500 7508112510 85-265 32 0.75 - - - - 6 & 14 or 20 0.8 1.4 20 : 4.8 : 2.2 : 1 68-120 4500 7508112511 85-265 40 0.60 - - - - 6 & 14 or 20 0.8 1.4 20 : 6 : 2.2 : 1 68-120 4500 750811913 85-265 5 1.25 5 1.25 7 1.1 6 & 14 or 20 0.8 1.4 16.66 : 0.833 : 0.833 : 1.166 : 2.166 : 1 68-130 4500 750811914 85-265 5 1.30 5 1.30 19 0.5 6 & 14 or 20 0.8 1.4 20 : 0.8 : 0.8 : 2.8 : 2.2 : 1 68-140 4500 05/16 137 MID-PLN Planar Transformers - 250W Applications Characteristics ■ Switching frequency: 200kHz to 700kHz optimized ■ Forward converter ■ Power Range: 150W to 250W ■ Half/full bridge ■ Core effective area Ae (mm2): 80.4 ■ Active clamp ■ BSAT @125°C: 370mT ■ Isolation voltage: 250VDC at 1 second ■ Operating temp: -40°C to 125°C ■ Max LxWxH (mm): 26.67 x 29.30 x 10.50 ■ Package size: ERI25/10/18 Electrical Properties DCR (mΩ MAX) L (µH) Turns NPRI1 : NPRI2 : NSEC PRI 1 PRI 2 SEC ET1 (VµS) Leakage Inductance2 (µH) MAX Dimensions & Footprint 750341134 65 2:2:4 1.5 1.5 750341135 145 3:3:4 3.0 3.0 3.5 119 0.15 A 3.5 178 0.25 750341136 260 4:4:4 5.0 B 5.0 3.5 238 0.40 750341137 410 5:5:4 A 6.0 6.0 3.5 297 0.65 A 750341138 65 750341139 145 2:2:3 1.5 1.5 3.0 119 0.15 C 3:3:3 3.0 3.0 3.0 178 0.25 D 750341140 750341141 260 4:4:3 5.0 5.0 3.0 238 0.40 C 410 5:5:3 6.0 6.0 3.0 297 0.80 C 750341142 65 2:2:2 1.5 1.5 1.2 119 0.15 A 750341143 143 3:3:2 3.0 3.0 1.2 178 0.25 B 750341144 260 4:4:2 5.0 5.0 1.2 238 0.65 A 750341145 410 5:5:2 6.0 6.0 1.2 297 1.00 A Order Code With primary windings tied in series 2 With primary tied in series and all secondaries shorted 1 138 www.we-online.com/midcom 05/16 MID-PLN Planar Transformers - 250W Dimensions & Footprint A Dimensions & Footprint B Dimensions & Footprint C Dimensions & Footprint D 3 05/16 139 MID-PLC PLC Transformer for Texas Instruments Applications MID-PLC Characteristics ■ Designed for TI AFE030 / AFE031 / AFE032 Powerline Communications Analog Front-End ■ PLC Modem ■ Reinforced insulation ■ Metering ■ Isolation Voltage: 5000VAC at 1 sec ■ Data Concentrator ■ Lead-Free and RoHS Compliant ■ Operating Temp: –40°C to 125°C ■ Designed to meet IEC60950-1, EN60950-1, UL60950-1/CSA60950-1, AS.NZS60950.1 Electrical Properties Order Code Type Size L (mH) NLINE: NDEVICE Insulation Type UT (VAC) 750510476 Signal EE13 0.87 1.307 : 1 Reinforced 5000 Texas Instruments Analog Front End 140 ■ Integrated Powerline Driver with Thermal and Overcurrent Protection ■ Large Output Swing: - AFE031/32: 12VPP at 1.5A (15V Supply) - AFE030: 13VPP at 1.0A (15V Supply) ■ Low Power Consumption: 15 mW (Receive Mode) ■ Supports PRIME, G3, IEC 61334, P1901.2, ITU-G.hnem ■ Supports EN50065 CENELEC Bands A, B, C, D www.we-online.com/midcom 05/16 MID-PoE Power Over Ethernet Transformers Applications Characteristics ■ Optimized for PoE applications Flat top for pick and place operation on SMD parts ■ Small size ■ Cost effective ■ Custom designs available ■ Low resistance ■ 1500VAC isolation ■ ■ PoE powered devices ■ IP Phones ■ WLAN Access Points ■ Security cameras Suitable for PoE IC’s like LTC4267, LM5070, TPS23750, TPS23770, LM5071, LM5072 ■ EP7 Electrical Properties Order Code Mount Ui (V) U0 (V) IO (A) UAUX (V) L (µH) NPRI : NSEC : NAUX fswitch UT (VAC) 750032163L SMD 33-57 3.3 0.91 8 500 12.04 : 1 : 2.504 200 1500 750032165L SMD 33-57 5.0 0.60 8 500 8 : 1 : 1.66 200 1500 750310018 SMD 33-57 3.3 0.91 8 500 12.05 : 1 : 2.51 200 1500 750310019 SMD 36-57 3.3 0.91 12 310 5.5 : 1 : 3.75 200 1875 750310020 SMD 33-57 5.0 0.60 8 500 8 : 1 : 1.664 200 1500 750310022 SMD 33-57 12.0 0.25 8 521 3.497 : 1 : 0.713 200 1500 3 EP10 Electrical Properties Order Code Mount Ui (V) U0 (V) IO (A) UAUX (V) L (µH) NPRI : NSEC : NAUX fswitch UT (VAC) 750032168L SMD 33-57 3.3 2.12 8 253.0 12.048 : 1 : 2.506 200 1500 750310027 SMD 9-50 3.3 3.03 8 20.4 4.505 : 1 : 2.5 200 1500 750310031 SMD 33-57 12.0 0.58 8 264.0 3.49 : 1 : 0.71 200 1500 750310032 SMD 33-57 12.0 0.58 12 155.0 1.47 : 1 : 1 200 1500 750310224 SMD 13-59 3.3 3.20 12 37.0 5.25 : 1 : 3.454 200 1500 EP13 Electrical Properties Order Code Mount Ui (V) UO1 (V) IO1 (A) UO2 (V) IO2 (A) UAUX (V) L (µH) NPRI : NSEC : NAUX fswitch UT (VAC) 750032171L SMD 33-57 3.3 4.091 - - 8 127.0 12.04 : 1 : 2.505 200 1500 750032172L SMD 33-57 5.0 2.700 - - 8 127.0 8 : 1 : 1.664 200 1500 750032173 SMD 33-57 12.0 1.125 - - 8 127.0 3.424 : 1 : 0.712 200 1500 750032395 SMD 13-59 3.3 3.200 - - 12 37.0 3.5 : 1 : 1.832 200 1500 750310007 SMD 35-57 3.3 2.500 12 0.33 12 127.0 6 : 1 : 3.4 : 3.4 300 1875 750310035 SMD 33-57 5.0 2.700 - - 12 77.4 3.66 : 1 : 2.49 200 1500 750310310 SMD 13-59 3.3 2.500 - - 10 37.0 2.63 : 1 : 1.377 200 1500 750310377 SMD 36-57 12.0 1.080 - - 12 127.0 2:1:1 250 1875 EFD20 Electrical Properties Order Code Mount Ui (V) UO1 (V) IO1 (A) UO2 (V) IO2 (A) UO3 (V) IO3 (A) UAUX (V) L (µH) NPRI : NSEC : NAUX fswitch UT (VAC) 750310002 SMD 20-72 5.0 4.0 - - - - 12 28.0 3.5 : 1 : 2.75 200 1875 750310042 TH 30-57 12.0 5.0 -12 1.6 - - 12 154.0 2:1:1:1 250 1875 750310059 SMD 36-72 5.0 6.0 - - - - - 29.2 8 : 1 : 3.5 200 1875 750310167 SMD 36-72 3.3 3.0 12 1.6 5 0.4 12 25.0 5 : 0.75 : 2 : 1 : 2 200 1875 750310346 SMD 36-72 12.0 2.5 - - - - 12 100.0 3:1:1 200 1875 05/16 141 MID-T8T T8 Transformer for LED Tube Lighting Applications Characteristics ■ Rounded core to maximize area ■ 20-30W power capability ■ High efficiency ■ Low leakage inductance ■ Shielded construction ■ Excellent EMI performance ■ Isolation voltage: 3750-4500VAC at 1 second ■ Lead free and RoHS compliant ■ Operating temp: -40°C to 125°C ■ Patent Pending ■ T8 LED tube lighting drivers Electrical Properties 142 Order Code Size Ui (VAC) UO (V) IO (A) Uaux (V) L (mH) NPRI: NSEC : NAUX fswitch (kHz) UT (VAC) Max L x W x H (mm) 760875142 EPT18 195-265 25.4 0.750 19 2.50 12.5 : 1 : 0.75 85 4500 18.80 x 36.50 x 11.25 750841243 EPT20 85-265 40.0 0.625 20 0.27 1.91 : 1 : 0.5 85 3750 22.50 x 47.00 x 12.00 www.we-online.com/midcom 05/16 MID-TIB Isolated Buck Transformers for Telecom Applications Applications Characteristics ■ High dielectric withstand voltage ■ PoE powered devices ■ High saturation current on Functional insulation designs ■ VoIP phones ■ Low leakage inductance on basic insulation designs ■ WLAN access points ■ Achieves higher creepage and clearance than standard EP5 package ■ Self shielding package Security cameras ■ ■ Basic or Functional insulation Telecom applications ■ ■ Isolation voltage: 2250VDC at 1 second ■ Lead free and RoHS compliant ■ Designed to meet EN60950-1, IEC60950-1, and UL60950-1/CSA60950-1 ■ Operating temp: -40°C to 125°C ■ Max LxWxH (mm): 7.0 x 9.1 x 7.8 3 Electrical Properties Order Code Ui (VDC) L (μH) ISAT (A) NPRI: NSEC fswitch (kHz) UO1 (V) IO1 (A) UO2 (V) IO2 (A) Insulation Type 750314743 36-72 22 1.05 1:1 200-350 10 0.05 10 0.05 Functional 750314744 36-72 33 1.07 1:1 200-350 10 0.05 10 0.05 Functional 750314745 36-72 47 0.91 1:1 200-350 10 0.05 10 0.05 Functional 750314746 36-72 22 0.76 1:1 200-350 10 0.05 10 0.05 Basic 750314747 36-72 33 0.54 1:1 200-350 10 0.05 10 0.05 Basic 750314748 36-72 47 0.50 1:1 200-350 10 0.05 10 0.05 Basic 05/16 143 Transformers Search by Power Power DC-DC Flyback Power Level (W) at 100kHz 1 1 2 2 2 3 3 3 4 5 6 6 8 8 8 8 8 10 10 10 10 10 12 14 14 14 14 14 14 14 14 14 16 17 19 19 19 22 22 22 23 24 25 25 25 35 35 36 37 38 38 42 43 47 49 50 60 68 70 73 81 91 97 98 101 102 120 127 136 141 151 184 187 261 311 343 437 Offline Power Level (W) at 100kHz 144 EP5 NEW EP5 ER9.5 NEW ER9.5S ER11.5 EP7 EP7 EP7 EPX7 ER14.5 EPX9 RM4 EP10 EP10 EP10 EPC13 EPC13 EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) RM5 EFD15 EE13/7/6 EFD15 EFD15 EP13 EP13 EP13 EP13 EP13 EP13 EE13/6/6 EE13/6/6 EE16/7/5 RM6 RM6 EE16/8/5 (EF16) EPC17 EPC17 EE16/7/5 EE16/8/5 (EF16) EE16/8/5 (EF16) EPW15 NEW EPW15 EFD20 EFD20 EFD20 EFD20 EFD20 EPT18 PQ2016 EE20/10/6 (EF20) EE20/10/6 (EF20) RM8 EE20/10/6 (EF20) EPT20 EFD25 EFD25 EFD25 PQ2620 RM10 EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/7 (EF25) EFD30 PQ2625 EE25/13/11 ER28/14 ER28/14 PQ3220 ER28/17 ER28/17 ETD34 PQ3230 ERL35 ETD39 5 5 6 7 10 13 12 15 12 12 26 26 30 27 51 52 47 73 51 69 73 116 122 164 244 304 = Reinforced insulation Package Size = Basic/supplementary insulation www.we-online.com/midcom Mount Pins SMD-H SMD-H SMD-V SMD-V SMD-V SMD-H TH-H SMD-H SMD-H SMD-V SMD-H TH-V SMD-H SMD-H TH-H TH-H SMD-H TH-H TH-H SMD-H SMD-H TH-V SMD-H TH-H TH-H SMD-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H TH-H TH-V TH-H TH-V SMD-V TH-H TH-H SMD-H TH-V TH-H SMD-H TH-H SMD-H TH-H SMD-H SMD-H TH-H SMD-H SMD-H TH-V TH-H TH-V TH-V TH-H TH-H TH-H TH-H SMD-H TH-V TH-V TH-H TH-H TH-V TH-H TH-V TH-V TH-H TH-V TH-V TH-H TH-V TH-H TH-V TH-H TH-H 6 6 8 8 12 6 6 8 8 12 8 6 8 8 8 10 10 8 9 9 10 6 12 8 8 10 10 10 10 10 12 12 9 10 10 6 8 9 10 9 10 8 12 15 9 8 10 12 10 12 9 14 14 10 12 10 10 12 10 12 12 12 10 14 10 12 12 8 12 10 12 12 10 14 12 14 16 Safety Length (mm) Width (mm) Height (mm) Bobbin Page Number 6.60 7.00 10.00 10.00 12.95 10.16 10.16 9.78 10.16 16.00 10.16 11.44 13.34 13.34 13.34 14.60 14.60 14.70 13.72 13.80 13.72 13.97 17.78 15.00 16.76 15.75 13.46 13.46 13.97 13.97 13.97 13.97 13.50 14.73 17.50 17.65 20.07 20.32 19.00 19.20 18.50 17.96 17.78 15.70 15.80 21.08 23.11 23.11 21.50 21.50 19.00 24.00 22.20 22.25 21.59 23.00 22.50 26.30 26.04 27.03 29.20 26.16 27.94 27.05 27.95 33.00 29.20 26.00 31.00 29.84 35.56 32.00 29.84 39.60 35.56 36.50 49.00 8.26 9.10 12.07 14.00 12.85 13.36 8.26 9.50 9.14 16.80 10.16 11.44 15.24 15.24 11.68 14.73 20.92 16.76 20.45 23.90 20.20 13.97 22.35 15.75 16.76 22.35 17.75 17.75 13.97 13.97 17.17 17.17 20.00 14.73 18.80 16.64 21.84 24.38 18.50 23.75 16.50 20.30 26.90 22.10 26.50 21.08 26.10 29.65 29.00 33.80 41.70 24.00 25.00 14.40 21.59 22.00 47.00 33.00 26.67 32.45 30.35 26.16 29.21 32.25 20.32 35.56 30.35 23.50 31.00 24.00 37.34 39.00 24.00 43.18 37.34 44.00 41.90 5.59 7.80 5.97 5.00 6.35 8.64 9.78 10.54 12.32 7.62 12.70 11.18 11.43 11.56 12.57 8.50 8.25 12.70 10.16 11.00 10.50 11.18 8.89 18.50 8.89 8.89 12.70 12.70 12.70 12.70 12.70 12.70 14.60 15.24 13.31 13.21 13.46 16.00 12.50 10.16 18.80 14.30 13.80 23.30 13.00 10.80 10.92 11.43 12.00 12.00 12.10 18.67 16.00 23.24 17.27 17.53 12.00 14.75 13.59 13.97 25.90 19.05 21.59 22.86 28.58 14.48 29.30 29.50 25.00 33.00 24.13 26.00 36.00 30.48 34.29 28.50 31.75 070-4426 070-6279 070-6051 070-6310 070-6058 070-5801 070-2150 070-4436 070-4434 070-4477 070-5103 070-5754 070-6052 070-4410 070-2365 070-5483 070-4887 070-4849 070-5662 070-6258 070-4820 070-2250 070-4265 070-5449 070-2745 070-5939 070-5465 070-4375 070-4300 070-4370 070-4482 070-4483 070-6506 070-2860 070-5472 070-5757 070-5657 070-5280 070-5620 070-4890 070-5278 070-5420 070-5642 070-5996 070-6384 070-2609 070-4290 070-5899 070-5981 070-5900 070-5743 070-5674 070-5643 070-5248 070-2255 070-4989 070-5669 070-6008 070-2710 070-4476 070-6362 070-5680 070-2607 070-5644 070-4846 070-5491 070-5649 070-5080 070-4869 070-5576 070-5050 070-5652 070-5565 070-5455 070-4796 070-5783 070-5724 51 52 75 76 77 53 54 55 65 78 66 91 56 57 58 67 68 22 23 24 25 92 41 26 39 40 59 60 61 62 63 64 20 21 27 93 94 30 69 70 28 29 31 73 74 42 44 45 43 46 71 86 34 33 95 32 72 48 47 49 87 96 35 37 36 50 88 38 80 79 89 82 81 84 90 83 85 No Bolts = Functional insulation 05/16 Transformers Search by Applications Applications Package Size Mount Safety EE13/6/6 EE13/6/6 EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/6 EE16/7/5 EE16/7/5 EE16/8/5 (EF16) EE16/8/5 (EF16) EE16/8/5 (EF16) EE20/10/6 (EF20) EE20/10/6 (EF20) EE20/10/6 (EF20) EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/11 EFD15 EFD15 EFD15 EFD20 EFD20 EFD20 EFD20 EFD20 EFD25 EFD25 EFD25 EFD30 EP5 NEW EP5 EP7 EP7 EP7 EP10 EP10 EP10 EP13 EP13 EP13 EP13 EP13 EP13 EPX7 EPX9 EPC13 EPC13 EPC17 EPC17 EPT18 EPT20 EPW15 NEW EPW15 ER9.5 NEW ER9.5S ER11.5 ER14.5 ER28/14 ER28/14 ER28/17 ER28/17 ERL35 ETD34 ETD39 PQ2016 PQ2620 PQ2625 PQ3220 PQ3230 RM4 RM5 RM6 RM6 RM8 RM10 TH-H TH-V TH-H TH-H SMD-H SMD-H TH-H TH-H TH-V TH-H TH-H SMD-H TH-H TH-V TH-H TH-H TH-V TH-H TH-V TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H SMD-H TH-H TH-H SMD-H TH-H SMD-H SMD-H SMD-H TH-H SMD-H SMD-H SMD-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H SMD-H SMD-H TH-H SMD-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-V SMD-V SMD-V SMD-V TH-V TH-H TH-V TH-H TH-H TH-H TH-H TH-V TH-V TH-V TH-V TH-V TH-V TH-V TH-V SMD-V TH-V TH-V = Reinforced insulation 05/16 Offline Lighting Metering x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x PoE x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x = Basic/supplementary insulation x x x x x x DC/DC Industrial Converter Controls x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x White Goods x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x DSL x x x x x x x x x x x x x x x x x x Telecom CMC x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x PFC Charging Stand-by Power x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Page Number 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 No Bolts = Functional insulation 145 Transformers Search by Topology Topology Package Size Mount Safety Flyback Push-Pull EE13/6/6 EE13/6/6 EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/6 EE16/7/5 EE16/7/5 EE16/8/5 (EF16) EE16/8/5 (EF16) EE16/8/5 (EF16) EE20/10/6 (EF20) EE20/10/6 (EF20) EE20/10/6 (EF20) EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/11 EFD15 EFD15 EFD15 EFD20 EFD20 EFD20 EFD20 EFD20 EFD25 EFD25 EFD25 EFD30 EP5 NEW EP5 EP7 EP7 EP7 EP10 EP10 EP10 EP13 EP13 EP13 EP13 EP13 EP13 EPX7 EPX9 EPC13 EPC13 EPC17 EPC17 EPT18 EPT20 EPW15 NEW EPW15 ER9.5 NEW ER9.5S ER11.5 ER14.5 ER28/14 ER28/14 ER28/17 ER28/17 ERL35 ETD34 ETD39 PQ2016 PQ2620 PQ2625 PQ3220 PQ3230 RM4 RM5 RM6 RM6 RM8 RM10 TH-H TH-V TH-H TH-H SMD-H SMD-H TH-H TH-H TH-V TH-H TH-H SMD-H TH-H TH-V TH-H TH-H TH-V TH-H TH-V TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H SMD-H TH-H TH-H SMD-H TH-H SMD-H SMD-H SMD-H TH-H SMD-H SMD-H SMD-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H SMD-H SMD-H TH-H SMD-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-V SMD-V SMD-V SMD-V TH-V TH-H TH-V TH-H TH-H TH-H TH-H TH-V TH-V TH-V TH-V TH-V TH-V TH-V TH-V SMD-V TH-V TH-V x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x = Reinforced insulation 146 = Basic/supplementary insulation www.we-online.com/midcom Forward x x x x Resonant LLC Half-Bridge x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Buck Boost Buck-Boost SEPIC/ Ćuk x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Page Number 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 No Bolts = Functional insulation 05/16 Transformers Search by Safety Safety Safety = Reinforced insulation 05/16 Package Size EE13/6/6 EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE16/8/5 (EF16) EE20/10/6 (EF20) EE20/10/6 (EF20) EE25/13/11 EFD15 EFD15 EFD15 EFD20 EFD20 EFD20 EFD25 EFD25 EFD30 EP5 NEW EP5 EP7 EP7 EP10 EP10 EP13 EP13 EP13 EPX9 EPC13 EPC13 EPC17 EPC17 ER9.5 ER11.5 ER14.5 PQ2016 PQ2620 PQ2625 PQ3220 PQ3230 RM4 RM5 RM6 RM6 RM8 RM10 EP7 EP10 EP13 EP13 EP13 EPX7 NEW ER9.5S EE13/6/6 EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/6 EE16/7/5 EE16/7/5 EE16/8/5 (EF16) EE16/8/5 (EF16) EE20/10/6 (EF20) EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/7 (EF25) EFD20 EFD20 EFD25 EPT18 EPT20 EPW15 NEW EPW15 ER28/14 ER28/14 ER28/17 ER28/17 ERL35 ETD34 ETD39 = Basic/supplementary insulation Bobbin Mount Pins DC-DC 100kHz Power (W) Page Number 070-2860 070-4849 070-4820 070-5420 070-4989 070-5248 070-5080 070-2745 070-5939 070-4265 070-2609 070-4290 070-5899 070-2710 070-4476 070-5491 070-4426 070-6279 070-5801 070-2150 070-6052 070-2365 070-5465 070-4300 070-4482 070-5103 070-5483 070-4887 070-5620 070-4890 070-6051 070-6058 070-4477 070-5674 070-6362 070-5649 070-5050 070-4796 070-5754 070-2250 070-5757 070-5657 070-2255 070-5680 070-4436 070-4410 070-4375 070-4370 070-4483 070-4434 070-6310 070-6506 070-5662 070-6258 070-5449 070-5472 070-5278 070-5280 070-5642 070-5643 070-2607 070-4846 070-5644 070-5981 070-5900 070-6008 070-5743 070-5669 070-5996 070-6384 070-5576 070-4869 070-5565 070-5652 070-5783 070-5455 070-5724 TH-V TH-H SMD-H TH-H TH-H TH-V TH-V TH-H SMD-H SMD-H TH-H SMD-H SMD-H TH-H SMD-H TH-H SMD-H SMD-H SMD-H TH-H SMD-H TH-H SMD-H TH-H SMD-H SMD-H TH-H SMD-H TH-H SMD-H SMD-V SMD-V SMD-V TH-V TH-V TH-V TH-V TH-V TH-V TH-V TH-V SMD-V TH-V TH-V SMD-H SMD-H SMD-H TH-H SMD-H SMD-H SMD-V TH-H TH-H SMD-H TH-H TH-H TH-V TH-H SMD-H TH-H TH-H TH-V TH-H TH-H SMD-H TH-H SMD-H TH-H TH-H SMD-H TH-V TH-H TH-V TH-H TH-H TH-H TH-H 10 8 10 8 10 10 8 8 10 12 8 10 12 10 12 12 6 6 6 6 8 8 10 10 12 8 10 10 10 9 8 12 12 14 12 12 12 12 6 6 6 8 12 12 8 8 10 10 12 8 8 9 9 9 8 10 10 9 12 14 10 10 14 10 12 12 9 10 15 9 10 12 10 12 14 14 16 17 10 10 24 50 47 127 14 14 12 35 35 36 70 73 102 1 1 3 3 8 8 14 14 14 6 8 8 22 22 2 2 5 42 81 120 151 311 6 10 19 19 49 91 3 8 14 14 14 4 2 16 10 10 14 19 23 22 25 43 97 101 98 37 38 68 38 60 25 25 141 136 187 184 343 261 437 21 22 25 29 32 33 38 39 40 41 42 44 45 47 49 50 51 52 53 54 56 58 59 61 63 66 67 68 69 70 75 77 78 86 87 88 89 90 91 92 93 94 95 96 55 57 60 62 64 65 76 20 23 24 26 27 28 30 31 34 35 36 37 43 46 48 71 72 73 74 79 80 81 82 83 84 85 No Bolts = Functional insulation 147 Transformers Search by Height Height Height (mm) 5.00 5.59 5.97 6.35 7.62 7.80 8.25 8.50 8.64 8.89 8.89 8.89 9.78 10.16 10.16 10.50 10.54 10.80 10.92 11.00 11.18 11.18 11.43 11.43 11.56 12.00 12.00 12.00 12.10 12.32 12.50 12.57 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 13.00 13.21 13.31 13.46 13.59 13.80 13.97 14.30 14.48 14.60 14.75 15.24 16.00 16.00 17.27 17.53 18.50 18.67 18.80 19.05 21.59 22.86 23.24 23.30 24.13 25.00 25.90 26.00 28.50 28.58 29.30 29.50 30.48 31.75 33.00 34.29 36.00 Package Size NEW ER9.5S EP5 ER9.5 ER11.5 ER14.5 NEW EP5 EPC13 EPC13 EP7 EFD15 EFD15 EFD15 EP7 EE13/7/4 (EF12.6) EPC17 EE13/7/4 (EF12.6) EP7 EFD20 EFD20 EE13/7/4 (EF12.6) RM4 RM5 EFD20 EP10 EP10 EFD20 EFD20 EPT20 EPT18 EPX7 EPC17 EP10 EE13/7/4 (EF12.6) EP13 EP13 EP13 EP13 EP13 EP13 EPX9 NEW EPW15 RM6 EE16/7/5 RM6 EFD25 EE16/8/5 (EF16) EFD25 EE16/8/5 (EF16) EFD30 EE13/6/6 EFD25 EE13/6/6 EE16/8/5 (EF16) EE20/10/6 (EF20) RM8 EE20/10/6 (EF20) EE13/7/6 PQ2016 EE16/7/5 RM10 EE25/13/7 (EF25) EE25/13/7 (EF25) EE20/10/6 (EF20) EPW15 PQ3220 ER28/14 PQ2620 ER28/17 ERL35 EE25/13/7 (EF25) PQ2625 EE25/13/11 ETD34 ETD39 ER28/14 PQ3230 ER28/17 = Reinforced insulation 148 Bobbin Mount Pins Length (mm) Width (mm) DC-DC 100kHz Power (W) 070-6310 070-4426 070-6051 070-6058 070-4477 070-6279 070-4887 070-5483 070-5801 070-2745 070-5939 070-4265 070-2150 070-5662 070-4890 070-4820 070-4436 070-2609 070-4290 070-6258 070-5754 070-2250 070-5899 070-6052 070-4410 070-5981 070-5900 070-5669 070-5743 070-4434 070-5620 070-2365 070-4849 070-5465 070-4375 070-4300 070-4370 070-4482 070-4483 070-5103 070-6384 070-5757 070-5472 070-5657 070-2710 070-5642 070-4476 070-5420 070-5491 070-6506 070-6008 070-2860 070-5280 070-5643 070-2255 070-4989 070-5449 070-5674 070-5278 070-5680 070-2607 070-5644 070-5248 070-5996 070-5050 070-4869 070-6362 070-5652 070-5783 070-4846 070-5649 070-5080 070-5455 070-5724 070-5576 070-4796 070-5565 SMD-V SMD-H SMD-V SMD-V SMD-V SMD-H SMD-H TH-H SMD-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H SMD-H TH-H SMD-H SMD-H TH-V TH-V SMD-H SMD-H SMD-H TH-H SMD-H TH-H SMD-H SMD-H TH-H TH-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H SMD-H SMD-H TH-V TH-H SMD-V TH-H SMD-H SMD-H TH-H TH-H TH-H TH-H TH-V TH-H TH-H TH-V TH-H TH-H TH-V TH-V TH-V TH-H TH-H TH-V TH-H TH-V TH-H TH-V TH-H TH-H TH-V TH-V TH-V TH-H TH-H TH-V TH-V TH-V 8 6 8 12 12 6 10 10 6 8 10 12 6 9 9 10 8 8 10 9 6 6 12 8 8 10 12 10 9 8 10 8 8 10 10 10 10 12 12 8 9 6 10 8 10 12 12 8 12 9 12 10 9 14 12 10 8 14 10 12 10 14 10 15 12 12 12 12 14 10 12 8 14 16 10 12 10 10.00 6.60 10.00 12.95 16.00 7.00 14.60 14.60 10.16 16.76 15.75 17.78 10.16 13.72 19.20 13.72 9.78 21.08 23.11 13.80 11.44 13.97 23.11 13.34 13.34 21.50 21.50 22.50 19.00 10.16 19.00 13.34 14.70 13.46 13.46 13.97 13.97 13.97 13.97 10.16 15.80 17.65 17.50 20.07 26.04 17.78 27.03 17.96 33.00 13.50 26.30 14.73 20.32 22.20 21.59 23.00 15.00 24.00 18.50 26.16 27.94 27.05 22.25 15.70 35.56 31.00 29.20 32.00 36.50 27.95 29.20 26.00 39.60 49.00 29.84 35.56 29.84 14.00 8.26 12.07 12.85 16.80 9.10 20.92 14.73 13.36 16.76 22.35 22.35 8.26 20.45 23.75 20.20 9.50 21.08 26.10 23.90 11.44 13.97 29.65 15.24 15.24 29.00 33.80 47.00 41.70 9.14 18.50 11.68 16.76 17.75 17.75 13.97 13.97 17.17 17.17 10.16 26.50 16.64 18.80 21.84 26.67 26.90 32.45 20.30 35.56 20.00 33.00 14.73 24.38 25.00 21.59 22.00 15.75 24.00 16.50 26.16 29.21 32.25 14.40 22.10 37.34 31.00 30.35 39.00 44.00 20.32 30.35 23.50 43.18 41.90 24.00 37.34 24.00 2 1 2 2 5 1 8 8 3 14 14 12 3 10 22 10 3 35 35 10 6 10 36 8 8 37 38 60 38 4 22 8 10 14 14 14 14 14 14 6 25 19 19 19 70 25 73 24 102 16 68 17 22 43 49 50 14 42 23 91 97 98 47 25 151 136 81 184 343 101 120 127 261 437 141 311 187 = Basic/supplementary insulation www.we-online.com/midcom Safety Page Number 76 51 75 77 78 52 68 67 53 39 40 41 54 23 70 25 55 42 44 24 91 92 45 56 57 43 46 72 71 65 69 58 22 59 60 61 62 63 64 66 74 93 27 94 47 31 49 29 50 20 48 21 30 34 95 32 26 86 28 96 35 37 33 73 89 80 87 82 83 36 88 38 84 85 79 90 81 No Bolts = Functional insulation 05/16 Transformers Search by Length Length Length (mm) 6.60 7.00 9.78 10.00 10.00 10.16 10.16 10.16 10.16 11.44 12.95 13.34 13.34 13.34 13.46 13.46 13.50 13.72 13.72 13.80 13.97 13.97 13.97 13.97 13.97 14.60 14.60 14.70 14.73 15.00 15.70 15.75 15.80 16.00 16.76 17.50 17.65 17.78 17.78 17.96 18.50 19.00 19.00 19.20 20.07 20.32 21.08 21.50 21.50 21.59 22.20 22.25 22.50 23.00 23.11 23.11 24.00 26.00 26.04 26.16 26.30 27.03 27.05 27.94 27.95 29.20 29.20 29.84 29.84 31.00 32.00 33.00 35.56 35.56 36.50 39.60 49.00 Package Size EP5 NEW EP5 EP7 ER9.5 NEW ER9.5S EP7 EP7 EPX7 EPX9 RM4 ER11.5 EP10 EP10 EP10 EP13 EP13 EE13/6/6 EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EE13/7/4 (EF12.6) EP13 EP13 EP13 EP13 RM5 EPC13 EPC13 EE13/7/4 (EF12.6) EE13/6/6 EE13/7/6 EPW15 EFD15 NEW EPW15 ER14.5 EFD15 EE16/7/5 RM6 EFD15 EE16/8/5 (EF16) EE16/8/5 (EF16) EE16/7/5 EPC17 EPT18 EPC17 RM6 EE16/8/5 (EF16) EFD20 EFD20 EFD20 RM8 EE20/10/6 (EF20) EE20/10/6 (EF20) EPT20 EE20/10/6 (EF20) EFD20 EFD20 PQ2016 EE25/13/11 EFD25 RM10 EFD25 EFD25 EE25/13/7 (EF25) EE25/13/7 (EF25) EE25/13/7 (EF25) PQ2620 PQ2625 ER28/14 ER28/17 ER28/14 ER28/17 EFD30 PQ3220 PQ3230 ERL35 ETD34 ETD39 = Reinforced insulation 05/16 Bobbin Mount Pins Width (mm) Height (mm) DC-DC 100kHz Power (W) 070-4426 070-6279 070-4436 070-6051 070-6310 070-5801 070-2150 070-4434 070-5103 070-5754 070-6058 070-6052 070-4410 070-2365 070-5465 070-4375 070-6506 070-5662 070-4820 070-6258 070-4300 070-4370 070-4482 070-4483 070-2250 070-5483 070-4887 070-4849 070-2860 070-5449 070-5996 070-5939 070-6384 070-4477 070-2745 070-5472 070-5757 070-4265 070-5642 070-5420 070-5278 070-5620 070-5743 070-4890 070-5657 070-5280 070-2609 070-5981 070-5900 070-2255 070-5643 070-5248 070-5669 070-4989 070-4290 070-5899 070-5674 070-5080 070-2710 070-5680 070-6008 070-4476 070-5644 070-2607 070-4846 070-6362 070-5649 070-5576 070-5565 070-4869 070-5652 070-5491 070-5050 070-4796 070-5783 070-5455 070-5724 SMD-H SMD-H SMD-H SMD-V SMD-V SMD-H TH-H SMD-H SMD-H TH-V SMD-V SMD-H SMD-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H TH-H TH-H SMD-H SMD-H TH-V TH-H SMD-H TH-H TH-V TH-H TH-H SMD-H SMD-H SMD-V TH-H TH-H TH-V SMD-H SMD-H TH-H TH-V TH-H SMD-H SMD-H SMD-V TH-H TH-H TH-H SMD-H TH-V TH-H TH-V TH-H TH-H SMD-H SMD-H TH-V TH-V TH-H TH-V TH-H SMD-H TH-H TH-H TH-V TH-V TH-V TH-V TH-V TH-H TH-H TH-H TH-V TH-V TH-H TH-H TH-H 6 6 8 8 8 6 6 8 8 6 12 8 8 8 10 10 9 9 10 9 10 10 12 12 6 10 10 8 10 8 15 10 9 12 8 10 6 12 12 8 10 10 9 9 8 9 8 10 12 12 14 10 10 10 10 12 14 8 10 12 12 12 14 10 10 12 12 10 10 12 12 12 12 12 14 14 16 8.26 9.50 9.14 12.07 14.00 13.36 8.26 9.14 10.16 11.44 12.85 15.24 15.24 11.68 17.75 17.75 20.00 20.45 20.20 23.90 13.97 13.97 17.17 17.17 13.97 14.73 20.92 16.76 14.73 15.75 22.10 22.35 26.50 16.80 16.76 18.80 16.64 22.35 26.90 20.30 16.50 18.50 41.70 23.75 21.84 24.38 21.08 29.00 33.80 21.59 25.00 14.40 47.00 22.00 26.10 29.65 24.00 23.50 26.67 26.16 33.00 32.45 32.25 29.21 20.32 30.35 30.35 24.00 24.00 31.00 39.00 35.56 37.34 37.34 44.00 43.18 41.90 5.59 7.80 10.54 5.97 5.00 8.64 9.78 12.32 12.70 11.18 6.35 11.43 11.56 12.57 12.70 12.70 14.60 10.16 10.50 11.00 12.70 12.70 12.70 12.70 11.18 8.50 8.25 12.70 15.24 18.50 23.30 8.89 13.00 7.62 8.89 13.31 13.21 8.89 13.80 14.30 18.80 12.50 12.10 10.16 13.46 16.00 10.80 12.00 12.00 17.27 16.00 23.24 12.00 17.53 10.92 11.43 18.67 29.50 13.59 19.05 14.75 13.97 22.86 21.59 28.58 25.90 29.30 33.00 36.00 25.00 26.00 14.48 24.13 34.29 28.50 30.48 31.75 1 1 3 2 2 4 3 6 3 6 2 8 8 8 14 14 16 10 10 10 14 14 14 14 10 8 8 10 17 14 25 14 25 5 14 19 19 12 25 24 23 22 38 22 19 22 35 37 38 49 43 47 60 50 35 36 42 127 70 91 68 73 98 97 101 81 120 141 187 136 184 102 151 311 343 261 437 = Basic/supplementary insulation Safety Page Number 51 52 55 75 76 53 54 65 66 91 77 56 57 58 59 60 20 23 25 24 61 62 63 64 92 67 68 22 21 26 73 40 74 78 39 27 93 41 31 29 28 69 71 70 94 30 42 43 46 95 34 33 72 32 44 45 86 38 47 96 48 49 37 35 36 87 88 79 81 80 82 50 89 90 83 84 85 No Bolts = Functional insulation 149 Transformers Search by Width Width Width (mm) 8.26 8.26 9.10 9.14 9.50 10.16 11.44 11.68 12.07 12.85 13.36 13.97 13.97 13.97 14.00 14.40 14.73 14.73 15.24 15.24 15.75 16.50 16.64 16.76 16.76 16.80 17.17 17.17 17.75 17.75 18.50 18.80 20.00 20.20 20.30 20.32 20.45 20.92 21.08 21.59 21.84 22.00 22.10 22.35 22.35 23.50 23.90 23.75 24.00 24.00 24.00 24.38 25.00 26.10 26.16 26.50 26.67 26.90 29.00 29.65 29.21 30.35 30.35 31.00 32.25 32.45 33.00 33.80 35.56 37.34 37.34 39.00 41.70 41.90 43.18 44.00 47.00 Package Size EP5 EP7 NEW EP5 EPX7 EP7 EPX9 RM4 EP10 ER9.5 ER11.5 EP7 EP13 EP13 RM5 NEW ER9.5S EE20/10/6 (EF20) EE13/6/6 EPC13 EP10 EP10 EE13/7/6 EE16/7/5 RM6 EE13/7/4 (EF12.6) EFD15 ER14.5 EP13 EP13 EP13 EP13 EPC17 EE16/7/5 EE13/6/6 EE13/7/4 (EF12.6) EE16/8/5 (EF16) EE25/13/7 (EF25) EE13/7/4 (EF12.6) EPC13 EFD20 RM8 RM6 EE20/10/6 (EF20) EPW15 EFD15 EFD15 EE25/13/11 EE13/7/4 (EF12.6) EPC17 ER28/14 ER28/17 PQ2016 EE16/8/5 (EF16) EE20/10/6 (EF20) EFD20 RM10 NEW EPW15 EFD25 EE16/8/5 (EF16) EFD20 EFD20 EE25/13/7 (EF25) PQ2620 PQ2625 ER28/14 EE25/13/7 (EF25) EFD25 EFD25 EFD20 EFD30 PQ3220 PQ3230 ER28/17 EPT18 ETD39 ETD34 ERL35 EPT20 = Reinforced insulation 150 Bobbin Mount Pins Length (mm) Height (mm) DC-DC 100kHz Power (W) 070-4426 070-2150 070-6279 070-4434 070-4436 070-5103 070-5754 070-2365 070-6051 070-6058 070-5801 070-4300 070-4370 070-2250 070-6310 070-5248 070-2860 070-5483 070-6052 070-4410 070-5449 070-5278 070-5757 070-4849 070-2745 070-4477 070-4482 070-4483 070-5465 070-4375 070-5620 070-5472 070-6506 070-4820 070-5420 070-4846 070-5662 070-4887 070-2609 070-2255 070-5657 070-4989 070-5996 070-5939 070-4265 070-5080 070-6258 070-4890 070-5576 070-5565 070-5674 070-5280 070-5643 070-4290 070-5680 070-6384 070-2710 070-5642 070-5981 070-5899 070-2607 070-6362 070-5649 070-4869 070-5644 070-4476 070-6008 070-5900 070-5491 070-5050 070-4796 070-5652 070-5743 070-5724 070-5455 070-5783 070-5669 SMD-H TH-H SMD-H SMD-H SMD-H SMD-H TH-V TH-H SMD-V SMD-V SMD-H TH-H TH-H TH-V SMD-V TH-V TH-V TH-H SMD-H SMD-H TH-H TH-V TH-V TH-H TH-H SMD-V SMD-H SMD-H SMD-H SMD-H TH-H TH-H TH-H SMD-H TH-H TH-V TH-H SMD-H TH-H TH-V SMD-V TH-H TH-H SMD-H SMD-H TH-V SMD-H SMD-H TH-V TH-V TH-V TH-H TH-H SMD-H TH-V SMD-H TH-H SMD-H TH-H SMD-H TH-H TH-V TH-V TH-H TH-H SMD-H TH-H SMD-H TH-H TH-V TH-V TH-H SMD-H TH-H TH-H TH-H TH-H 6 6 6 8 8 8 6 8 8 12 6 10 10 6 8 10 10 10 8 8 8 10 6 8 8 12 12 12 10 10 10 10 9 10 8 10 9 10 8 12 8 10 15 10 12 8 9 9 10 10 14 9 14 10 12 9 10 12 10 12 10 12 12 12 14 12 12 12 12 12 12 12 9 16 14 14 10 6.60 10.16 7.00 10.16 9.78 10.16 11.44 13.34 10.00 12.95 10.16 13.97 13.97 13.97 10.00 22.25 14.73 14.60 13.34 13.34 15.00 18.50 17.65 14.70 16.76 16.00 13.97 13.97 13.46 13.46 19.00 17.50 13.50 13.72 17.96 27.95 13.72 14.60 21.08 21.59 20.07 23.00 15.70 15.75 17.78 26.00 13.80 19.20 29.84 29.84 24.00 20.32 22.20 23.11 26.16 15.80 26.04 17.78 21.50 23.11 27.94 29.20 29.20 31.00 27.05 27.03 26.30 21.50 33.00 35.56 35.56 32.00 19.00 49.00 39.60 36.50 22.50 5.59 9.78 7.80 12.32 10.54 12.70 11.18 12.57 5.97 6.35 8.64 12.70 12.70 11.18 5.00 23.24 15.24 8.50 11.43 11.56 18.50 18.80 13.21 12.70 8.89 7.62 12.70 12.70 12.70 12.70 12.50 13.31 14.60 10.50 14.30 28.58 10.16 8.25 10.80 17.27 13.46 17.53 23.30 8.89 8.89 29.50 11.00 10.16 33.00 36.00 18.67 16.00 16.00 10.92 19.05 13.00 13.59 13.80 12.00 11.43 21.59 25.90 29.30 25.00 22.86 13.97 14.75 12.00 14.48 24.13 34.29 26.00 12.10 31.75 30.48 28.50 12.00 1 3 1 4 3 6 6 8 2 2 3 14 14 10 2 47 17 8 8 8 14 23 19 10 14 5 14 14 14 14 22 19 16 10 24 101 10 8 35 49 19 50 25 14 12 127 10 22 141 187 42 22 43 35 91 25 70 25 37 36 97 81 120 136 98 73 68 38 102 151 311 184 38 437 261 343 60 = Basic/supplementary insulation www.we-online.com/midcom Safety Page Number 51 54 52 65 55 66 91 58 75 77 53 61 62 92 76 33 21 67 56 57 26 28 93 22 39 78 63 64 59 60 69 27 20 25 29 36 23 68 42 95 94 32 73 40 41 38 24 70 79 81 86 30 34 44 96 74 47 31 43 45 35 87 88 80 37 49 48 46 50 89 90 82 71 85 84 83 72 No Bolts = Functional insulation 05/16 Toroids Search by Length/Width Length Length (mm) Package Size Header Mount Pins Width (mm) Height (mm) Page Number 4.40 4.40 4.80 5.30 5.30 5.50 5.90 5.90 6.10 6.10 6.20 6.30 6.60 6.60 6.70 6.70 8.30 9.00 9.00 9.00 9.10 11.60 TOR-4P-HT2-SFTY TOR-4P-HT2.5-SFTY TOR-4P-HT3.4-SFTY TOR-4P-HT2.2 TOR-8P-HT4 TOR-4P-HT4.7 TOR-4P-HT2 TOR-4P-HT3 TOR-4P-HT2.2-SFTY TOR-8P-HT4.4 TOR-6P-HT6.4-SFTY TOR-4P-HT4.1 TOR-4P-HT2.5 TOR-6P-HT2.5 TOR-6P-HT3.6 TOR-6P-HT4 TOR-4P-HT3.3 TOR-8P-HT5.3 TOR-4P-HT6.4 TOR-8P-HT7.6 TOR-6P-HT7.6-SFTY TOR-16P-HT6.5 250-0511 250-0581 250-0997 250-0841 250-0626 250-0608 250-0889 250-0973 250-0989 250-0912 250-1002 250-0621 250-1013 250-0528 250-0593 250-1109 250-1009 250-0482 250-0522 250-0931 250-1123 250-0592 SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD 4 4 4 4 8 4 4 4 4 8 6 4 4 6 6 6 4 8 4 8 6 16 9.10 9.10 9.50 5.80 8.30 9.60 8.30 8.30 9.00 9.70 16.30 8.90 8.90 8.90 9.00 10.50 9.60 9.00 10.20 8.60 13.00 9.40 2.00 2.50 3.40 2.40 4.10 4.80 2.00 3.00 2.20 5.00 6.40 4.10 2.50 2.50 3.60 4.20 3.30 5.30 6.60 7.60 7.60 6.50 98 100 101 103 115 108 102 105 99 116 113 107 104 110 111 112 106 117 109 118 114 119 Width (mm) Package Size Header Mount Pins Length (mm) Height (mm) Page Number 5.80 8.30 8.30 8.30 8.60 8.90 8.90 8.90 9.00 9.00 9.00 9.10 9.10 9.40 9.50 9.60 9.60 9.70 10.20 10.50 13.00 16.30 TOR-4P-HT2.2 TOR-8P-HT4 TOR-4P-HT2 TOR-4P-HT3 TOR-8P-HT7.6 TOR-4P-HT4.1 TOR-4P-HT2.5 TOR-6P-HT2.5 TOR-4P-HT2.2-SFTY TOR-6P-HT3.6 TOR-8P-HT5.3 TOR-4P-HT2-SFTY TOR-4P-HT2.5-SFTY TOR-16P-HT6.5 TOR-4P-HT3.4-SFTY TOR-4P-HT4.7 TOR-4P-HT3.3 TOR-8P-HT4.4 TOR-4P-HT6.4 TOR-6P-HT4 TOR-6P-HT7.6-SFTY TOR-6P-HT6.4-SFTY 250-0841 250-0626 250-0889 250-0973 250-0931 250-0621 250-1013 250-0528 250-0989 250-0593 250-0482 250-0511 250-0581 250-0592 250-0997 250-0608 250-1009 250-0912 250-0522 250-1109 250-1123 250-1002 SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD 4 8 4 4 8 4 4 6 4 6 8 4 4 16 4 4 4 8 4 6 6 6 5.30 5.30 5.90 5.90 9.00 6.30 6.60 6.60 6.10 6.70 9.00 4.40 4.40 11.60 4.80 5.50 8.30 6.10 9.00 6.70 9.10 6.20 2.40 4.10 2.00 3.00 7.60 4.10 2.50 2.50 2.20 3.60 5.30 2.00 2.50 6.50 3.40 4.80 3.30 5.00 6.60 4.20 7.60 6.40 103 115 102 105 118 107 104 110 99 111 117 98 100 119 101 108 106 116 109 112 114 113 Width 05/16 151 Toroids Search by Height/Safety Height Height (mm) Package Size Header Mount Pins Length (mm) Width (mm) Page Number 2.00 2.00 2.20 2.40 2.50 2.50 2.50 3.00 3.30 3.40 3.60 4.10 4.10 4.20 4.80 5.00 5.30 6.40 6.50 6.60 7.60 7.60 TOR-4P-HT2 TOR-4P-HT2-SFTY TOR-4P-HT2.2-SFTY TOR-4P-HT2.2 TOR-4P-HT2.5 TOR-6P-HT2.5 TOR-4P-HT2.5-SFTY TOR-4P-HT3 TOR-4P-HT3.3 TOR-4P-HT3.4-SFTY TOR-6P-HT3.6 TOR-8P-HT4 TOR-4P-HT4.1 TOR-6P-HT4 TOR-4P-HT4.7 TOR-8P-HT4.4 TOR-8P-HT5.3 TOR-6P-HT6.4-SFTY TOR-16P-HT6.5 TOR-4P-HT6.4 TOR-8P-HT7.6 TOR-6P-HT7.6-SFTY 250-0889 250-0511 250-0989 250-0841 250-1013 250-0528 250-0581 250-0973 250-1009 250-0997 250-0593 250-0626 250-0621 250-1109 250-0608 250-0912 250-0482 250-1002 250-0592 250-0522 250-0931 250-1123 SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD 4 4 4 4 4 6 4 4 4 4 6 8 4 6 4 8 8 6 16 4 8 6 5.90 4.40 6.10 5.30 6.60 6.60 4.40 5.90 8.30 4.80 6.70 5.30 6.30 6.70 5.50 6.10 9.00 6.20 11.60 9.00 9.00 9.10 8.30 9.10 9.00 5.80 8.90 8.90 9.10 8.30 9.60 9.50 9.00 8.30 8.90 10.50 9.60 9.70 9.00 16.30 9.40 10.20 8.60 13.00 102 98 99 103 104 110 100 105 106 101 111 115 107 112 108 116 117 113 119 109 118 114 Safety Safety Package Size Header Mount Pins Page Number TOR-4P-HT2 TOR-4P-HT2.2 TOR-4P-HT2.5 TOR-4P-HT3 TOR-4P-HT3.3 TOR-4P-HT4.1 TOR-4P-HT4.7 TOR-4P-HT6.4 TOR-6P-HT2.5 TOR-6P-HT3.6 TOR-6P-HT4 TOR-8P-HT4 TOR-8P-HT4.4 TOR-8P-HT5.3 TOR-8P-HT7.6 TOR-16P-HT6.5 TOR-4P-HT2-SFTY TOR-4P-HT2.2-SFTY TOR-4P-HT2.5-SFTY TOR-4P-HT3.4-SFTY TOR-6P-HT6.4-SFTY TOR-6P-HT7.6-SFTY 250-0889 250-0841 250-1013 250-0973 250-1009 250-0621 250-0608 250-0522 250-0528 250-0593 250-1109 250-0626 250-0912 250-0482 250-0931 250-0592 250-0511 250-0989 250-0581 250-0997 250-1002 250-1123 SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD 4 4 4 4 4 4 4 4 6 6 6 8 8 8 8 16 4 4 4 4 6 6 102 103 104 105 106 107 108 109 110 111 112 115 116 117 118 119 98 99 100 101 113 114 = Reinforced insulation 152 = Basic/supplementary insulation www.we-online.com/midcom No Bolts = Functional insulation 05/16 Globally available, locally present. The Würth Group 69,000 employees and sales of 11 billion € The Würth Elektronik Group 7,200 employees and sales of 688 million €* Electronic & Electromechanical Components Printed Circuit Boards Intelligent Systems Standard Custom eiSos Passive Components Power Modules eiCan LEDs Electromechanical Connectors Automotive Magnetics Innovation Team 05/16 Garching (Germany) Design & Application Center Tongzi (China) Medium/High Volume Production Semi-Automated Longgang (China) R&D and Asian Support Staff Prototyping Small Volume Production Design Center Watertown (USA) Headquarters Prototyping, R&D Design Design Center n ▲ Fuling (China) Medium/High Volume Production Lean Production Semi-Automated Sales Offices Production Sales Office & Production Design Center • 153 more than you expect Added value for you. Custom Capabilities Custom More than you Capabilities expect! n Fast Time-to-Market Designs n Logistic Solutions n Reliable Quality n Global Account Management n Reference Designs of Leading IC Manufacturers n Direct Support through Solution Oriented Employees www.we-online.com/midcom INSIGHT DESIGN 9987003 • May 2016 Rev 5.0 n Innovative