NetKey ® Category 5e U/UTP Copper Cable D ATA S H E E T Category 5e cable meets ANSI/TIA-568-C.2 Category 5e and ISO 11801 2nd Edition Class D channel standards. The conductors are 24 AWG copper insulated with HDPE polymer. The copper conductors are twisted in pairs and all four pairs are covered by a low smoke zero halogen or flame retardant PVC (CM or CMR) jacket. technical information Electrical performance: Certified performance in a 4-connector configuration up to 100 meters, meets ANSI/TIA-568-C.2 Category 5e and ISO 11801 2nd Edition Class D channel requirements Conductor/insulator: 24 AWG solid copper insulated with HDPE polymer Flame rating: LSZH – IEC 60332-1, 60754-1, 60754-2, 61034-2 PVC (CM) – UL 1685 PVC (CMR) – UL 1666 PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications Installation tension: 110N (25 lbf.) maximum Temperature rating: 0° to 50°C (32° to 122°F) during installation -20° to 60°C (14° to 140°F) during operation Cable jacket: LSZH – Low Smoke Zero Halogen CM – PVC CMR – Flame retardant PVC Cable diameter: LSZH – 4.7mm (0.187 in.) nominal PVC (CM), PVC (CMR) – 4.6mm (0.184 in.) nominal Cable weight: LSZH – 9 kg/305m (20 lbs./1000 ft.) PVC (CM) – 8 kg/305m (18 lbs./1000 ft.) PVC (CMR) – 8.5 kg/305m (19 lbs./1000 ft.) Packaging: 305m (1000 ft.) easy-pay-out box LSZH – 11 kg/305m (23 lbs./1000 ft.) PVC (CM) – 10 kg/305m (21 lbs./1000 ft.) PVC (CMR) – 10.5 kg/305m (22 lbs./1000 ft.) Packaged tested to ISTA procedure 1A key features and benefits Third party tested Cable has been tested as part of the NetKey ® Category 5e UTP Copper Cabling System by an independent laboratory and complies with the electrical channel requirements of the following standard: ANSI/TIA-568-C.2 Category 5e standard Descending length cable markings Easy identification of remaining cable reduces installation time and cable scrap Easy payout box Ensures proper performance and provides quick installation applications Applications include: • Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet) • 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM • Token ring 4/16 w w w. p a n d u i t . c o m NetKey ® Network Components NetKey ® UTP Copper Cable LSZH: NUL5C04BU-C* CM: NUC5C04BU-C* CMR: NUR5C04BU-C NetKey ® Category 5e UTP Jack Module Punchdown: NKP5E88MIW** Leadframe: NK5E88MIWY** NetKey ® Category 5e UTP Patch Cords – CM Foot lengths: NK5EPC3^Y Meter lengths: NK5EPC1M^^Y NetKey ® Category 5e Punchdown Patch Panels 12-port: NK5EPPG12WY 24-port, 1 RU: NK5EPPG24Y 48-port, 2 RU: NK5EPPG48Y NetKey ® Category 5e All Molded Punchdown Patch Panels 24-port, 1 RU: NK5EPP24P 48-port, 2 RU: NK5EPP48P NetKey ® Flush Mount Modular Patch Panels Angled, 24-port, 1 RU: NKPPA24FMY Angled, 48-port, 2 RU: NKPPA48FMY Flat, 24-port, 1 RU: NKPP24FMY Flat, 48-port, 2 RU: NKPP48FMY NetKey ® Category 5e All Molded Modular Patch Panels 24-port, 1 RU: NKPP24P 48-port, 2 RU: NKPP48P Termination and Cable Prep Tools JackRapid ™ Termination Tool: Conductor snipping tool: Conductor stripping tool: JR-PAN-2 CWST CJAST *For standard cable colors other than BU (Blue), replace BU in part number with WH (White) or IG (International Gray). Contact customer service for region availability. Standard pallets are configured in 4 layers, 9 cartons per layer, total of 36 cartons per pallet. Add E to end of part number for European pallets which are configured in 4 layers, 6 cartons per layer, total of 24 cartons per pallet. **For standard colors other than Off White (IW), replace suffix with EI (Electrical Ivory), IG (International Gray), WH (White), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green) or VL (Violet). Add -Q to end of part number for 25 pack convenience package. ^For standard foot lengths other than 3 feet, replace the 3 in the part number with 5, 7, 10 14 or 20. For standard colors other than Off White, add suffix BU (Blue), RD (Red), YL (Yellow) or GR (Green) before the Y at the end of the part number. For example, the part number for a blue, Category 5e 5-foot patch cord is NK5EPC5BUY. ^^For standard meter lengths other than 1 meter, replace the 1 in the part number with 2, 3, 4 or 5. For standard colors others than Off White, add suffix BU (Blue), RD (Red), YL (Yellow) or GR (Green) before Y at the end of the part number. For example, the part number for a blue, Category 5e, 5-meter patch cord is NK5EPC5MBUY. Fluke JackRapid™ Termination Tool available through distribution. To locate the local office, visit www.flukenetworks.com/contact. JackRapid™ is a trademark of Fluke Networks. NetKey ® Category 5e U/UTP Copper Cable additional specifications Mechanical Test Ultimate Breaking Strength Minimum Bend Radius Electrical Test Nominal Velocity of Propagation (NVP) >400 N (90 lbf.) 4 x cable diameter 65% cable construction Jacket Conductor Wire Conductor Insulator Rip Cord WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2012 Panduit Corp. ALL RIGHTS RESERVED. NKDS30--WW-ENG Replaces WW-NKDS12 12/2012